About the Sensaphone® Zone Water Detector
Use this zone water detector with a Sensaphone remote monitoring system. It features a 10-foot water rope that's perfect for detecting water on a floor or in a false ceiling. Connect as many as 10 water rope extensions to cover a 100-foot area. The zone water detector connects to the Sensaphone system with an included 25-foot wire. It is powered by two included "AA" batteries.
What's in the box:
- Zone Water Detector unit
- 10' Water-rope cable
- 25" Power/ground wire
- 2 Mounting screws
- 2 Drywall anchors
- 5 Self-adhesive cable clamps
- 4 Self-adhesive Rubber feet
- Instructions sheet
Thanks for submitting your review
More details on the Sensaphone® Zone Water Detector
Overview: The Sensaphone FGD-0056 Zone Water Detector is designed to detect the presence of water on a floor or in a false ceiling via the supplied WaterRope. The unit comes with 10' of WaterRope cable for area coverage. Up to 10 WaterRopes can be cascaded from a single sensor for even greater coverage up to 100'. The Zone Water Detector also comes with 25 feet of power/ground wire. The FGD-0056 is compatible with all Sensaphone monitoring units. The Zone Water Detector operates on two "AA" batteries already installed inside the unit.
Installation: The Zone Water Detector should be mounted on a wall or other surface where it will not be immersed, but near enough to the surface being monitored to make the best use of the supplied 10' WaterRope. Plug in the WaterRope before attaching cable clamps to secure it to the monitored surface. One end of the 25' power/ground wire should be connected to the screw terminals on the detector while the other end of the wire plugs into a zone or input terminal on your Sensaphone monitoring unit.
Q Crutchfield asked: Why did you buy this?