Contact us
Close contact box
Connect ID #
164 219 614 3
Connect ID #
164 219 614 3
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

Our contact center is currently closed.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to
Advisor Image

Your Advisor,

More about me
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Sensaphone® Model 800

Remote monitoring system for your home or office (Gray)

Item # 721FGD0800

Look after your home, vacation cabin, or office while you're away.

Look after your home, vacation cabin, or office while you're away.

Discontinued item

Item # 721FGD0800

Other options

About the Sensaphone® Model 800

A system that notifies you of potential trouble

Look after your home, vacation cabin, or office while you're away. Sensaphone systems let you create a customized remote monitoring system for almost any building. The Model 800 easily mounts on a wall or counter, and its built-in detectors monitor for temperature changes, power failure, and loud noises like a smoke alarm siren. If any detectors are triggered, the system calls you on the phone to notify you of potential problems.
Model 400 in home

A system that notifies you of potential trouble

Look after your home, vacation cabin, or office while you're away. Sensaphone systems let you create a customized remote monitoring system for almost any building. The Model 800 easily mounts on a wall or counter, and its built-in detectors monitor for temperature changes, power failure, and loud noises like a smoke alarm siren. If any detectors are triggered, the system calls you on the phone to notify you of potential problems.

Infrared Motion Detector Window/Door Sensor

Add other detection zones

This unit also features seven open ports to connect additional detectors using 22-gauge accessory wire (not included). Choose a remote temperature sensor or window/door sensor to give your system more complete coverage. Water monitors allow you to detect water in areas that are prone to flooding. Temperature and humidity detectors alert you to changes in the condition of your garage, storage space or greenhouse. Use Sensaphone to monitor areas where you keep family possessions or exotic plants.

Customized phone calls keep you informed

The Model 800 connects to a phone line, and it contacts you with customized voice messages you can create for each type of detector in your system. Program the Model 800 with up to eight different telephone numbers — it'll call each one until someone answers. For example, if the heater in your vacation home stops working and the temperature drops, the Model 800 will call you at home, at the office, and on your cell until you pick up. That way, you'll be able to schedule repairs from out of town.


Product highlights:

  • customizable remote monitoring system for homes, offices, and other buildings
  • connect as many as seven optional detectors to monitor water, temperature, humidity, or unauthorized entry
  • built-in temperature, noise, and power failure detectors
  • connects to a standard phone line
  • calls as many as eight different phone numbers when any detector is triggered
  • line-out connection allows you to hook up another phone
  • built-in microphone allows you to record your own voice messages and listen in from a remote location
  • wall mounts using keyhole slots
  • AC power adapter included
  • optional battery backup with 6 "C" batteries (not included)
  • 7-3/4"W x 8-1/4"H x 1-5/8"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # FGD-0800

What's in the box:

  • Sensaphone 800 Remote Monitoring Unit (gray)
  • AC Power adapter with 6' DC cord
  • 7' Telephone cord with a RJ-11 connector on each end
  • Flat-head/phillips-head screwdriver tool
  • User's Manual
  • Warranty sheet
  • Warranty Registration Card
  • Warranty Disclaimer sheet
  • "Important Information!" card
  • Sensaphone accessories brochure

Customer reviews

Loading reviews...

Sensaphone® Model 800 reviews

Average review:

1 review

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)



Crutchfield response

<< >>

More details on the Sensaphone® Model 800

Mark G.

Product Research


Overview: The Sensaphone Model 800 is a full-programmable, environmental monitoring system that offers extensive on-site and remote monitoring capability to small businesses, private homes, farms, greenhouse, computer rooms, and remote facilities. Designed for desktop or wall mounting, the Model 800 is simple to install, program and operate; no changes to standard electrical or telephone service are required. When connected to a telephone line, it will respond to an alarm by dialing up to eight separate telephone numbers. When the call is answered, an "Alert Condition" message is delivered in the user recorded voice.

Built-In Sensors: The Model 800 features built-in sensors to monitor a variety of conditions - High sound level, AC electrical power failure, and Battery backup conditions. In addition to the 800's built-in ability to monitor for power failures and to listen to the sound of a smoke detector, there are also eight external inputs that can be connected to a variety of sensors to monitor temperature, water on the floor, humidity, and much more. One of the eight external inputs already comes with a temperature sensor for monitoring temperature where the 800 is installed.

8 Alert Zones: The 800 is equipped with eight alert zone connections. Optional Sensaphone sensors can be added to extend monitoring capabilities to include the following - Intrusion or unauthorized entry, Water leaks and seepage, Temperature, Humidity, Equipment operation, and many other condition that may require unique monitoring solutions. These optional sensors can be connected to the 800 using 18-26 gauge wire. Each sensor can be several hundred feet from the unit, as long at the total resistance of the circuit is not greater than 50-ohms. The Model 800 may have more than one sensor connected to the same alert zone either in parallel (Open contacts) or series (Closed contacts).

Note: Do not use sensors, switches or relay that supply any voltage or current to the Model 800.

Keypad: Programming and operating of the 800 is accomplished by using the unit's keypad. Programming features include Zone Configuration, Temperature Settings, AC Power Settings, and Alarm Settings.

Status Reports: In addition to communication and alarm monitoring capabilities, the Model 800 will also respond to your instructions and provide you with access to information on monitored conditions at all times. The status of each monitored condition is readily obtained at the unit's installation site, or remotely by telephone. By issuing commands to the unit, either at the installation site or over standard telephone lines, the following features may be activated - Acknowledgment of existing alarms, The Status Report on all monitored conditions, and Limited programming. At the close of every Status Report, time is provided for listening to on-site sounds.

LED Indicators: The LEDs on the unit's front-panel provide on-site alarm and status information. The 800 features four LED indicators - System On, Phone In Use, Alarm, and Battery OK.

Security Code: The Security Code is the last step after setting all other programming parameter for the Model 800. The code consists of a 4-digit number you select and will effectively prevent unauthorized changes to the Model 800's programming.

Telephone Connection: The Model 800 features a RJ-11 LINE and EXT connection. Your incoming phone-line plugs into the RJ-11 LINE connection and your telephone plugs into the RJ-11 EXT connection. The 800 will operate with all standard analog telephone lines that accept pulse or tone dialing. The Model 800 cannot be used on an extension line to dial its own telephone number. Also, it may not be installed on a party line, pay telephone line or digital telephone system.

Dial-Out Telephone Numbers: The Model 800 can store up to eight 48-digit phone numbers. These are the numbers that will be called during alarm dial-out. In the event of an alarm, the numbers are dialed sequentially, 1 though 8. The Model 800 can be set to cycle through your eight dial-out numbers from 1 to 255 calls (15 calls if only one telephone number is programmed) during an Alarm Dial-Out.

Alarm Dial-Out: When an alarm is detected, the Sensaphone 800 can notify up to eight people by making voice phone calls. It will continue to make phone calls until someone responds to the call. The voice messages can be custom recorded, so you get to describe each alarm message that it speaks in your own voice. The Sensaphone 800 can also be programmed to send an alarm message to a numeric beeper/pager. The message will include the Sensaphone's telephone number and the Zone numbers that are in alarm. The phone interface includes a line seize feature so that extension phones are automatically disconnected when it needs to make an alarm phone call.

Voice Messages: The 800's digital speech recording feature allows you to record custom messages from each of the 8 Zones and an ID Message. This means that when the 800 calls you during an alarm, you will hear a personalize Voice Message identifying the unit and telling you exactly what alarm condition exists. You can record a separate message for each of the four Zones. The message can run a maximum of 5 seconds. The ID Message can be a maximum of 8 seconds.

Built-In Speaker: When the Model 800 dials out to report a alarm, it also audibly recites the alarm message through it's speaker. The Local Voice Mute command allows you to turn off the speaker at the Model 800's site during alarm dial-outs and status call-ins. This feature is used to prevent intruders or unauthorized person from hearing the alarm dial-out message or from hearing the Status Report during an off-site call.

Built-In Microphone: The Model 800 is provide with a built-in microphone which is used to monitor high sound levels produced near the installation site. The sensitivity of the microphone is configurable and will detect a continuous as well as a pulsating alarm. If this sound level exists for 8 consecutive seconds or for the programmed length of time, the model 800 will dial out with an alarm message. During an alarm dial-out, the microphone allows four-second intervals to listen-in to sounds at the Model 800's locations. When calling for a Status Report, the microphone permits listening to on-site sounds for a programmed time interval.

Output Relay: A built-in output relay is provided to switch an external device either automatically, or manually. You can use it to have a local light or siren trip when an alarm occurs, or even to set off a local alarm when the phone line is cut or unplugged. You can even use it to control a dual setback thermostat to change the temperature remotely.

Power Supply With Battery Backup: The Model 800 is provided with a DC power transformer that will plug into any standard 120 VAC outlet and a battery backup (batteries not included) that enable the unit to continue function if AC power is removed. To ensure reliable operation, the Model 800 features power backup capability; in the event of AC power failure, six C-cell alkaline batteries (not included) will continue to power the unit for approximately 24 hours. Do not use rechargeable batteries.

Built-In Surge Protection: The Model 800 has built-in surge protection, however, it is recommended that additional protection be obtained for the unit and for any electronic equipment that is attached to your power supply and telephone lines.

Built-In Clock: The Model 800 has a built-in clock. If the AC power fails, the clock will continue to keep time until the battery back-up fails.

Mounting: The Sensaphone 800 can be either Flat or Wall mounted. The Model 800 can be mounted on top of a desk or other horizontal surface. The 800 can also be wall-mounted via the unit's rear-panel keyhole slots and using the supplied hardware.

Loading accessories...

Customer Q&A

Loading articles...