About the NAD C 356DAC
An integrated amp for your whole music library
An integrated amp for your whole music library
Adding a DAC to an acclaimed integrated amp is like taking a slice of warm pie and adding a scoop of vanilla. The point is, it's rare that something couldn't be bettered by adding a complementary item. And NAD has pushed this time-honored philosophy forward into the digital age with the new C 356DAC integrated amplifier.
They've taken one of their popular mainstays, the C 356BEE integrated amp, and added a world-class DAC so that you can treat all your digital sources to the power and control that has made NAD legendary among audio enthusiasts.
Digital sources welcome
This amp features NAD's innovative modular design construction,which allows you to customize your input configuration by adding or swapping modules on the back of the unit. The 356DAC's included DAC module features an asynchronous USB connection that controls the data flow of your computer audio files, reclocking the data stream to minimize jitter. Your music will come to life in three dimensions as the soundstage expands and reveals detail. This module also features an optical input, for use with your CD, DVD, or Blu-ray player, and it supports sample rates of up to 192kHz.
Power to spare
NAD's PowerDrive™ technology allows the C 356DAC to sound even more potent than you would expect from its rating of 80 watts x 2 channels. Like a turbo-charger, the PowerDrive circuitry senses the demands placed on the amp and pours on higher current when it's needed to reproduce peaks of musical energy.
The ins and outs
With enough connections to hook up seven audio components and two pairs of speakers, the C 356DAC can handle your arsenal of audio gear. Should you wish to swap out the DAC module to accommodate a turntable, owners can install an optional NAD PP375 phono input module for listening to vinyl. The included remote gives you easy control of the amplifier and the other NAD audio components in your system.
Separate preamp input/line-level output jacks let you use the C 355DAC as an independent power amplifier (or as a preamp, in the unlikely event that the built-in wattage doesn't produce enough volume for you). If your main stereo speakers don't supply enough bass to disturb the peace, you can easily add a powered subwoofer.
And it's green too
NAD designed the C 356DAC to reduce energy consumption without sacrificing performance. It consumes just 0.5 watts in standby mode and includes a convenient all-off "vacation" switch.
- 80 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.007% THD
- 80 watts x 2 channels into 4 ohms (20-20,000 Hz) at 0.007% THD
- 4-ohm stable for use with a wide range of speakers
- signal-to-noise ratio: 101 dB
- asynchronous DAC module features Burr-Brown TI PCM 1796 technology
- sample rates: 32kHz-96kHz (USB), 32kHz-192kHz (optical)
- PowerDrive circuit with automatic speaker impedance sensing delivers maximum dynamic power output regardless of speaker load
- Soft Clipping circuit gently limits amplifier power output to reduce risk of speaker damage due to prolonged high volume operation
- 1 Modular Design Construction (MDC) bay allows you to swap in the PP375 phono stage or other MDC Modules in the Dac module's place
- toroidal power transformer
- rotary bass and treble controls with defeat switch for tone control bypass
- 7 RCA audio inputs including 2 tape in/outs
- tape monitor loop for adding an equalizer or signal processor
- front-panel minijack input for connecting a portable music player
- main-amp input and 2 preamp outputs for connecting a powered subwoofer or separate amplifier for bi-amping
- full-size headphone jack
- front-panel switching for 2 pairs of speakers
- two pairs of speaker binding posts
- RS-232 port for operation with third-party controllers
- 12-volt trigger output
- IR input/output
- one switched AC convenience outlet
- detachable AC power cord
- remote control
- 17-1/8"W x 5-3/16"H x 13-13/16"D
- weight: 19.6 lbs.
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # C356DAC
What's in the box:
- Stereo integrated amplifier w/ DAC
- 68" AC Power cord
- Wireless remote control (SR 8)
- 2 "AA" batteries
- 2 Pre-out/Main-in jumpers (installed)
- Owner's Manual
- Warranty Card
- MDC DAC instruction sheet
NAD C 356DAC reviews
Thanks for submitting your review
More details on the NAD C 356DAC
Features & specs
|Watts RMS per Channel (8-ohms)||80|
|Watts RMS per Channel (6-ohms)||80|
|Watts RMS per Channel (4-ohms)||80|
|Minimum Impedance||4 ohms|
|Signal to Noise Ratio||101|
|Digital Music Features|
|Built-in DAC (Digital to Analog Converter)||Yes|
|High-resolution Audio Playback||No|
|Total Analog Inputs||7|
|Optical Digital Inputs||1|
|Coaxial Digital Inputs||No|
|Preamp Outputs||Stereo (2)|
|Dimensions and Warranty|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
NAD PowerDrive Circuit: The C 356DAC use NAD's proprietary PowerDrive amplifier technology that provides high dynamic power and low impedance drive capability. By adding a second high-voltage rail to the amp's well regulated high-current power supply, the amplifier can nearly double its continuous power on a short term dynamic power basis. This uniquely efficient power supply topology provides the real world benefits of high dynamic power that remains uncompromised by low impedance speakers.
FDP Specifications: NAD uses Full Disclosure Power (FDP), the most demanding criterion for performance measurement. FDP specifies distortion under the most extreme conditions of low impedance loads and frequency extremes, rather than the simple and easy 1kHz @ 8 ohms test quoted by many of other manufactures. NAD uses this stricter performance criterion because it more closely matches the demands of real music and real loudspeakers. Maintaining specified distortion at 4 ohms and at 20Hz to 20kHz is a much more difficult achievement. The NAD C 356DAC is rated at 80 watts x 2 channel (@ 20-20kHz, in 4/8-ohm, with 0.007% THD).
Soft Clipping: NAD's Soft Clipping circuit gently limits the output of the C 356DAC to minimize audible distortion when the amplifier is over-driven. While Soft Clipping can be left on at all times to reduce the likelihood of audible distortion from excessive volume settings, you can also turn the circuit off for critical listening if you prefer.
Digital-to-Analog Converter (DAC): The C 356DAC stereo integrated amplifier is fitted with NAD's MDC DAC USB Digital-to-Analog Converter which lets you listen to music stored on or streamed to your computer through your hifi-system without noise or distortion. The C 356DAC uses an 'asynchronous USB' technique and a high precision clock, so your 24-bit/96kHz quality computer music flows smoothly without 'jitter' or harsh distortion.
Modular Design Construction (MDC): Modular Design Construction (MDC) makes future upgrades possible with interchangeable, upgradeable modules.
Remote Control: The included IR remote control handles the key functions of the C 356DAC. The IR remote can also be used to directly command other NAD products that respond to applicable common remote control codes. This includes other NAD Stereo Receiver, Integrated Amplifier, and Preamplifier models. It has additional controls to remotely operate NAD CD Players, AM/FM Tuners, and dedicated AM/FM/DB Tuners. It will operate up to a distance of 23'. The remote requires two "AA" alkaline batteries (included).
Volume: The Volume control adjust the overall loudness of the signals being fed to t he loudspeakers or headphones. The Volume control does not affect recordings made using the Tape output terminals, but will affect the signal going to the Pre-amp output terminals (Pre Out 1 and Pre Out 2).
Balance: The Balance control adjusts the relative levels of the left and right speakers. The Balance control does not affect recordings made using the Tape output terminals, but will affect the signal going to the Pre-amp output terminals (Pre Out 1 and Pre Out 2).
Tone Controls: The C 356DAC stereo integrated amplifier features independent Bass (100Hz) & Treble (10kHz) controls to adjust the tonal balanced of your system. The Tone control does not affect recordings made using the Tape output terminals, but will affect the signal going to the Pre-amp output terminals (Pre Out 1 and Pre Out 2).
Note: The Tone control circuits can be bypassed.
Input Selector Switch: Slide this switch to select the active input on the DAC module; either Optical for S/PDIF or USB for computer audio.
Note: The Phono input cannot be selected as an active input since there is no Phono input and no room for an additional MDC module.
USB (Type-B) Port: The C 356DAC stereo integrated amplifier features a rear-panel USB (type-B) port to connect to your computer, so you can listen to music stored on or streamed to your computer (Windows or Mac). The USB input supports audio sampling rates of 32kHz to 96kHz.
Note: The rear-panel DAC Module switch must be set to USB.
Optical Digital Input: The stereo integrated amplifier also features a rear-panel optical (toslink) digital input for connecting of your CD, SACD, DVD, or Blu-ray player. The optical digital input supports audio sampling rates of 32kHz to 192kHz.
Note: The rear-panel DAC Module switch must be set to Optical.
Front-Panel Stereo Minijack: The NAD C 356DAC is equipped with a front-panel stereo minijack (3.5mm) to temporarily connect your portable digital audio player.
Analog Inputs: The NAD C 356DAC stereo integrated amplifier is fitted with 5 rear-panel analog stereo audio inputs (RCA). These inputs are labeled 'MP', 'CD', 'Tuner', 'Disc', and 'AUX'.
Tape Monitor Inputs/Outputs: The NAD C 356DAC is equipped with two stereo Tape Monitor outputs (labeled 'Tape Monitor' and 'Tape 2') for recording purposes.
A-B Speaker Terminals: The NAD C 356DAC is fitted with A & B speaker outputs. You can choose to play back only the A speakers, only the B speakers, or both A-B speakers. The speaker terminals are binding-posts and will accept single banana plugs, pin connectors, or bare wire (16-12 AWG).
Note: The stereo integrated amp will support one pair of 4 to 8-ohm speakers or two pair of 8-ohm speakers.
Preamp Outputs: The C 356DAC features dual stereo pre-amp outputs (labeled 'Pre Out1' and 'Pre-Out 2') to connect the unit to an external power amplifier or power subwoofer.
Main Input: This is a stereo RCA connection which allows the connection of an external preamplifier or processor.
Headphone Output: The C 356DAC is fitted with a front-panel 1/4" headphone jack for connecting a set of headphones (sold separately). The headphone jack will work in parallel with the selected speakers (A and/or B). To listen to only your headphones, de-select Speakers A-B. The volume, tone, and balance controls are operative for headphone listening.
IR Input/Output: There is an IR input (3.5mm), used to control this unit using an optional infrared repeater or the IR output of another component. There is also an IR output (3.5mm) used to control another compatible component.
+12V Trigger Output: The +12V trigger output (3.5mm) lets you turn on/off another device along with the C 356DAC.
RS-232 Port: The rear-panel RS-232 port allows connection to a compatible PC or external whole-house control system from companies such as AMX or Crestron. NAD is a certified partner of AMX and Crestron and fully supports these external devices.
Switched AC Outlet: This convenient outlet can supply switched AC power to another component or accessory. The total draw off all devices connected to this outlet must not exceed 120 watts.
AC Power Cord: The C 356DAC comes supplied with a detachable 68" AC power cord.
Q Crutchfield asked: Why did you buy this?
5 questions already asked