About the NAD PP375
Upgrade your NAD C375BEE or C356BEE integrated amp with the PP375 phono preamp module, then fire up your turntable to enjoy exceptional vinyl LP playback. This module adds connections for your turntable onto the amplifier's back panel. Two separate, switchable inputs accommodate both moving magnet and moving coil phono cartridges. You'll get outstanding sonic performance at a reasonable price.
Important note: The installation of this module should be handled by an NAD authorized dealer or an authorized NAD service center. This is not intended to be a user installed accessory.
- separate selectable inputs for moving magnet and moving coil phono cartridges
- THD: <0.009%
- installation should be handled by an NAD authorized dealer or an authorized NAD service center; not intended to be a user installed accessory
- built-in low-frequency rumble filter reduces wasted amplifier power at frequencies below audible levels
- 3-5/16"W x 1-5/8"H x 2-5/16"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # PP375
What's in the box:
- NAD PP 375 Phono Preamplifier Module
- Flat-flexible cable
- Mounting Instructions
NAD PP375 reviews
Thanks for submitting your review
More details on the NAD PP375
Features & specs
|Adjustable Resistance Load||No|
|Adjustable Capacitance Load||No|
|RCA Inputs||1 pair|
|RCA Outputs||1 pair|
|Signal-to-noise Ratio (MM)||Not given|
|Signal-to-noise Ratio (MC)||Not given|
Product Notice: This item should be installed by an NAD-authorized servicing dealer. It is not intended to be installed by the consumer.
Overview: The NAD PP 375 Phono Preamplifier Module is an add-on accessory for the NAD C375BEE and C356BEE Stereo Integrated Amplifiers. From the factory, the C375BEE and C356BEE have no phono inputs. The PP 375 Phono Module requires installation to replace the dummy plate on the rear panel in order to create an input. Once installed, the module will accept both moving magnet or moving coil cartridges.
Installation: The PP 375 phono preamplifier module installs and mounts inside of the integrated amplifier. The installation should be performed by an NAD-authorized servicing dealer, and not the consumer.
Specifications Tables: The Specification table for PP 375 phono preamplifier module.
|PP375||Moving Coil (MC)||Moving Magnet (MM)|
|Input Overload||>4mV (20Hz-20kHz||>40mV (20Hz-20kHz)|
|RIAA Accuracy||+/- 0.25dB|
|Total Harmonic Distortion||<0.03% (20Hz-20kHz)|
|IHF A Signal to Noise||>76dB (110 Ohms load)||>77dB (IHF cartridge load)|