About the Bowers & Wilkins STAV 24
Bowers & Wilkins' STAV 24 speaker stands are designed for the company's 606 and 607 bookshelf speakers, but they can be used for any speaker of similar dimensions. Carpet spikes and rubber feet for bare floors are included. Each stand is hollow, so the post can be filled with sand or shot (not included) for added mass and stability.
- 24" tall
- top plate dimensions: 5-15/16" x 7-7/16"
- weight limit: 16 lbs.
- steel construction
- posts can be filled with sand or shot (not included) for added mass and stability
- carpet spikes and rubber feet included
- 9-1/2"W x 25"H x 11-7/8"D (with carpet spikes)
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # FP36773
What's in the box:
- 4 Upright posts
- 2 Top-plates
- 2 Bases
- 4 Foam pads
- 16 Screws
- 8 Rubber feet
- 8 Spike feet
- 8 Feet screw-caps
- 8 Top-plate spikes
- 8 Hex-nuts
- Assembly Instructions
Thanks for submitting your review
More details on the Bowers & Wilkins STAV 24
Speaker Compatibility: The STAV24 (S2) speaker stands are designed mainly for the Bowers & Wilkins bookshelf loudspeakers (including the 606 & 607), but can also be used with other brands of bookshelf speakers of similar dimensions and weight. The STAV24 (S2) stands place the Bowers & Wilkins 606 or 607 bookshelf loudspeakers at the optimal listening height when seated.
Spike & Rubber Feet: The Bowers & Wilkins STAV24 (S2) speaker stands are supplied with rubber and spike foot options. The spike foot option should be used when the stands are to be placed on a carpeted floor. The spikes pierce the carpet to rest on the surface underneath. Adjust the spikes to ensure that the stands are vertical and don't rock. Use the rubber foot option if the stands are to be placed on tiled or wooden floors.
- Dimensions With Spikes: 9.5" (w) x 25.0" (h) x 11.875" (d)
- Dimension With Rubber Feet: 9.5" (w) x 24.625" (h) x 11.875" (d)
Note: The B&W STAV24 (S2) speaker stands should always be installed with the spike or rubber feet installed for optimum performance and proper stability.
Hollow Upright Posts: The hollow upright posts can be filled with sand (not included) to increase the weight and stability of the speaker stand.
Note: The STAV24 (S2) stands do not offer wire or cable management.