About the Bowers & Wilkins Zeppelin
Innovative industrial design meets uncompromising audio fidelity
Innovative industrial design meets uncompromising audio fidelity
Bowers & Wilkins (B&W) brings over 40 years of studio speaker design experience to the Zeppelin, and it shows in both the unique look and the outstanding performance of this iPod/iPhone speaker system. You'll enjoy extraordinarily detailed sound, with clear highs, accurate midrange, and full, natural bass more like what you'd expect from separate stereo components than an all-in-one speaker system.
A sturdy, stainless steel arm holds your iPod out from the Zeppelin's body. This lets you grasp the player in your hand naturally when you're using its click wheel or touch screen to queue up songs. The system's tone-shaping controls are available right from your iPod's main menu when you place your player on the dock, a new option called "Speakers" appears on its screen. A palm-sized remote gives you control over basic functions like volume, play/pause, and track skip.
Built for superior sound quality
The Zeppelin's unusual shape isn't just for good looks. Its rounded, tapered ends minimize the cabinet surface area around the built-in speakers, which helps ensure smooth response and a wide, spacious soundfield. A dampening layer sandwiched between the cabinet's stiff polymer inner casing and heavy stainless steel cover eliminates sound-muddying vibrations.
Advanced driver technology
This system uses a pair of aluminum dome tweeters to produce crystal-clear highs, and rigid glass fiber woofers for accurate midrange detail. A built-in Kevlar-reinforced subwoofer with back-firing ports delivers deep, rich bass. Three high-performance amplifiers one for the left channel, one for the right, and a dedicated bass amp reproduce your favorite music with authoritative, room-filling sound.
From the review Bowers and Wilkins Zeppelin Lifts the Party
"The Zeppelin created an expansive sound stage. The effect is difficult to describe, but to me it sounded like the music had room to breathe. Sounds that were supposed to be concentrated in different channels were clearly separate, while blended ensembles presented a smooth spread from left to right."
Ralph, Blog Editor and A/V Writer
- powered speaker system for docking iPods and iPhones
- for all docking iPods, including 160GB iPod classic, 5th generation iPod nano, and 3rd generation iPod touch
- compatible with iPhone, iPhone 3G, and iPhone 3GS
- two 1" tweeters and two 3-1/2" midrange woofers
- internal 5" subwoofer with rear-firing ports
- 25 watts x 2 for midranges and tweeters, plus 50 watts for subwoofer
- polished stainless steel construction
- minijack auxiliary input accepts both analog and optical digital connections
- composite and S-video output for connection to a TV
- USB port (for firmware updates only)
- remote control
- AC power cable
- weight: 16.5 lbs.
- 25-3/16"W x 7-13/16"H x 8-3/16"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # Zepplin
What's in the box:
- Powered speaker system for iPod/iPhone
- Wireless remote control
- CR2032 Lithium battery (installed in remote)
- 9.75' AC cord
- Owner's Manual
- Quick Start Guide
- Important Safety Instructions
- Warranty booklet
- On-line registration brochure
Bowers & Wilkins Zeppelin reviews
Thanks for submitting your review
More details on the Bowers & Wilkins Zeppelin
Overview: The Bowers & Wilkins (B&W) Zeppelin is a powered speaker system made for iPod and iPhone with an airship-inspired design. It features a standard iPod dock connector, as well as a 3.5mm auxiliary input and a USB Type B connector. The included composite and S-Video outputs let you stream video to your TV from your iPod.
Speakers: The Zeppelin is equipped with five high-quality drivers:
- Tweeters: The high frequencies are handled by a pair of 1" aluminum dome tweeters. The sound is enhanced by an adapted version of B&W's trademark Nautilus tweeter tube.
- Midranges: The unit features two 3.5" cone midranges, made from highly-optimized glass fiber.
- Woofer: The single 5" woofer features an oversized magnet, a 4-layer voice coil, and a Kevlar-reinforced cone. The woofer is mounted in the center--the deepest part of the Zeppelin's sleek enclosure--with rear-firing ports on each side.
Amplification: Powering the speakers are three high-quality digital amplifiers with a total of 100 watts--one for the bass, one for the left midrange/tweeter combo and one for the right. The single woofer is driven by a 50 watt amplifier, while each pair of midranges and tweeters is driven by a 25 watt amplifier.
iPod Compatibility: The Zeppelin has been certified "Made for iPod" and "Works with iPhone", which means that it has been designed to connect specifically to iPod and iPhone, and meets Apple performance standards. This unit has varying levels of compatibility with most all iPods, from simply connecting the iPod's headphone output to the Zeppelin's Auxiliary input to audio and video streaming from the Internet. The iPods are separated into 5 groups, depending upon the level of performance:
- Group A (non-docking iPods): iPod 1st and 2nd generation, iPod shuffle 1st and 2nd generation. These iPods can be connected by their headphone outputs to the Zeppelin's Auxiliary Input. The Zeppelin cannot control or charge these models.
- Group B (with non-compatible dock): iPod 3rd generation. Although this iPod has the iPod 30-pin dock connector, it cannot be charged by the Zeppelin. Connect by the headphone output to the Zeppelin's Aux input.
- Group C (docking iPods): iPod mini, iPod 4th generation. Docks to the Zeppelin's iPod connector and charges. Volume control on the unit and with the remote, but not on the iPod. Track controls are available on the iPod and using the remote control.
- Group D (docking iPods): iPod classic, iPod 5th generation, iPod nano (1st, 2nd, 3rd, 4th, and 5th generation). Same as Group C, but adds volume control on the iPod. Video-capable iPods can output video through the Zeppelin's composite or S-Video outputs.
- Group E (Touch screen iPods/iPhone): iPod touch (1st, 2nd, and 3rd generation), iPhone, iPhone 3G, iPhone 3GS. Volume control on the unit, on the iPod, and with the remote. Track controls on the iPod and with the remote control. Audio and video streaming from the Internet. Videos are output through the Zeppelin's composite or S-Video outputs to your TV. (Zeppelin's software may need to be updated in some cases to enable some functions.)
iPod/iPhone Compatibility Chart: The Zeppelin is compatible and supports the following iPod/iPhone model functions (as of Jan. 2010):
|iPod/iPhone Model||Generation||Media Type||Control Type||Display Type||Charge|
|Audio||Video||Speaker Dock||iPod/iPhone||Song/Artist Text||Track Info|
Note: Apple iPod/iPhone software updates may change functionality results. If you download a newer software version, you may need to reset the device and your iPod/iPhone to regain functionality. If this doesn't work, you may need to revert to the older software version or wait until an newer software update is available.
Inputs/Outputs: In addition to the 30-pin iPod dock connector, the Zeppelin offers other inputs and outputs on the back panel:
- 3.5mm Auxiliary Input: The 3.5mm mini-jack allows you to listen to an external audio device. The input is compatible with both analog and digital (via optical mini plug) signals. The iPod dock has priority over the Aux input, therefore, any connected iPod must be un-docked before you can listen to a source connected via the Aux input.
- Composite and S-Video Outputs: You can playback videos stored on your iPod to your TV through the composite and S-Video outputs. You can also stream video from the Internet to your TV when a WiFi-capable iPod touch or iPhone is docked.
- USB Connector: The Type B USB port allows you to connect the unit to your computer for downloading software updates to the Zeppelin.
Controls: The Zeppelin offers power and volume control on the top of the unit, but no track playback controls. When docked, the iPod is positioned at an angle that makes it easy to select tracks or change settings, as if the iPod was in your hand. The supplied wireless remote offers power and volume controls, as well as play/pause, next track, previous track, and select. When playing back a device using the auxiliary input jack, the remote's play/pause button acts as a mute button. Remote dimensions: W=2.041", H=3.129", D=0.958"
LED Indicator: The Zeppelin has an LED indicator on the front panel to give you the status of the player at a glance. The indicator illuminates in a range of colors to indicate different operational conditions.
Audio Settings: The Zeppelin offers no bass or treble controls on the unit. When you place the unit with its back against the wall, the bass level is boosted, and more so if it is in a corner. However, when you dock a Group D or E iPod into the Zeppelin, an extra item called "Speakers" appears in the top-level menu. The "Speakers" setting has a tone control option which allows you to adjust the bass output. The default setting (Bass 0) should be used when the Zeppelin is on an open table. The Bass -1 setting should be used when the Zeppelin is against a single wall, and Bass -2 when placed in a corner to compensate for the added bass boost from the speaker's positioning. Personal preference settings (Bass +1 and Bass -3) are also provided. The selected EQ setting is retained for any other iPod you dock, and to any second source connected to the Aux input. It is recommended that the EQ settings in the iPod or iPhone itself be turned off.
Taking iPhone Calls: If you have an incoming call while the iPhone is docked, the iPhone will ring through the Zeppelin and mute the music. The iPhone does not send the call audio to the dock connector, so you cannot hear the caller through the Zeppelin. You must either remove the iPhone from the Zeppelin to take the call, or leave it docked and turn on the iPhone's internal speaker to use it as a speaker phone.
Optional Wall Mount: The Zeppelin can be mounted on a wall if you desire. A dedicated optional wall mount bracket is available from the manufacturer.