About the PSB Image B6
Smooth-sounding bookshelf speakers
Smooth-sounding bookshelf speakers
Experience dynamic, impactful sound with PSB's Image B6 bookshelf speakers. They provide impressive stereo sound in a 2.1 subwoofer/satellite system, or make excellent front-channel home theater speakers. The Image line borrows from driver technologies developed for PSB's sophisticated Imagine family, as well as their top-tier Synchrony speakers, giving you high-end sound at a budget-friendly price. The Image line also features a slightly different cabinet design than its predecessors, showcasing clean lines that won't clutter up your listening room.
Advanced drivers for clean, well-balanced sound
The Image B6s each feature a 1" titanium dome tweeter that effortlessly dishes out smooth, uncolored highs. The long-excursion, high-output woofer uses the same proprietary ceramic-filled polypropylene cone as the Imagine line. The stiff, lightweight material helps it deliver midrange that's clean and balanced, with surprisingly deep bass. You'll also marvel at the detailed imaging, and wide soundstage produced by these compact speakers.
Sleek, thoughtful cabinet design
All Image speakers have heavy internal bracing and 1-1/8" thick MDF cabinets to ensure impressively solid, acoustically inert enclosures. The cabinets have a traditional look, but with slightly curved tops and fronts to soften it. This family of speakers also features attractive vinyl finishes, allowing the Image speakers to easily integrate into just about any décor.
- frequency response: 45-23,000 Hz (±3dB)
- sensitivity: 90 dB
- impedance: 6 ohms
- recommended power: 20-150 watts
- 1" titanium dome tweeter with neodymium magnets
- 6-1/2" clay ceramic-filled polypropylene woofers
- bass reflex (ported) design
- two sets of gold-plated five way binding posts — can be bi-wired
- dark cherry vinyl finish
- 7-3/4"W x 14"H x 10-3/4"D
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # Image B6 CH
What's in the box:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 8 Adhesive backed rubber feet
- 4 Input terminal jumpers (installed)
- Owner's manual (English/ French/ Spanish/ German)
- Specification sheet (English/ French/ Spanish/ German)
- Warranty information
PSB Image B6 reviews
Thanks for submitting your review
More details on the PSB Image B6
Features & specs
|Tweeter Size (inches)||1|
|Midrange Size (inches)|
|Woofer Size (inches)||6.5|
|Frequency Response||45-23k Hz|
|Connector Type||5-way post|
|Mounting Bracket Included||No|
|Recommended Stand Height (inches)||34|
|Parts Warranty||5 Years|
|Labor Warranty||5 Years|
Cone Design: The woofer cones are clay/ceramic filled polypropylene to optimize the combination of stiffness, internal damping, and low mass. The woofers' magnetically neutral polycarbonate basket contributes additional stiffness, and the bullet-shaped phase-plug enhances linearity at higher frequencies.
Tweeter: The 1" titanium dome, Ferrofluid cooled tweeters use a neodymium magnet structure to help extend the frequency response at both ends for effortless, airy top octaves and smooth, uncolored response.
Crossover Network: The crossover is a 2-way acoustical fourth order Linkwitz-Riley type with a 24 dB/octave slope. The tweeter and woofer are crossed over at 1,800 Hz.
Dual Binding Posts:The dual binding post input terminals are located on the lower rear of the speaker cabinet. The two sets of binding posts are shorted together by gold-plated jumpers. With the jumper removed the Image B6 can be bi-wired or bi-amplified. The binding posts will accept spade connectors, single banana plugs, pin connectors, and bare wire up to 8 gauge.
- On Axis @ 0°: 45-23,000 Hz (+/-3 dB)
- On Axis @ 0°: 59-20,000 Hz (+/-1.5 dB)
- Off Axis @ 30°: 59-10,000 Hz (+/-1.5 dB)
- Low Frequency Cutoff -10 dB: 40 Hz
- Anechoic Chamber: 89 dB
- Typical Listening Room: 90 dB
1 question already asked