GoPro HD Helmet Hero

Still Images: The HD Hero can take 5 megapixel still images (2592 x 1944) manually (single shot) or automatically at different shooting options. You can shoot photos every 2, 5, 10, 30, or 60 seconds. You can also record still photos in a 3-shot burst (in 2 seconds) or using the 10-second self timer.

Storage: The HD Hero records video and still images onto SD and SDHC memory cards (2 GB to 32 GB). No memory is included with the camera, so you will need to obtain an SD/SDHC card prior to recording. For HD video, Class 4 SD cards or higher are recommended. The average recording time capacity of a 32 GB SDHC card is as follows:

• 1080p (30 fps): 4 hours 21 min

• 960p (30 fps): 5 hours 26 min

• 720p (60 fps): 4 hours 21 min

• 720p (30 fps): 8 hours 9 min

• WVGA (60 fps): 8 hours 9 min

Battery: The HD Hero is powered by the supplied AHDBT-001 rechargeable Lithium-Ion battery (3.7V, 1100mAh). It has a battery life of approximately 2.5 hours while shooting video. The battery can be charged to 80% capacity in about 2 hours via a computer's USB port (USB cable supplied), or to a full charge in about 4 hours. You can also use a USB-compatible wall or car charger to charge the battery. The battery will charge to 80% capacity in about 1 hour, or to a full charge in about 2 hours.

Auto Power Off: To save battery power, you can set the camera's Auto Power Off feature to turn off the camera in 1, 2, or 5 minutes after the last button was pressed. The Auto Power Off does not function during shooting.

LCD Screen/Red LED: The small (3/4" diagonal) front panel LCD screen provides camera status indications only. It will indicate the shooting mode, resolution, battery status, and setup menu. The camera's red LED will blink to indicate the camera is recording. It can be turned off, if desired, for stealth.

Exposure Control: You can choose between two exposure settings:

• Center Weighted Average: best for normal outdoor and indoor lighting conditions

• Spot: used primarily for shooting from inside a car or other dark space, looking out into a brighter outside setting. The exposure is adjusted for the absolute center of the screen.

Upside Down Image: If you need to mount the camera upside down to get the perfect angle for your video or still images, you can set the camera to save the photo upside down so they will appear right side up on your computer or TV.

Connections: The HD Hero has the following connections:

• USB: Mini-B USB 2.0 (High Speed)

• A/V: 2.5mm sub-mini jack for composite video and stereo audio output

• HDTV: 2.5mm sub-mini jack for component video output

Specifications:

• Image Sensor: 1/2.5" HD CMOS, 2.2µm-sized pixels

• Light Sensitivity: >1.4 V/lux-sec

• Dimensions: Width=2.36", Height=1.657", Depth=1.486"

• Weight: 3.3 ounces including battery; 5.9 ounces including waterproof housing

Replacement Parts: The HD Hero is designed for use in extreme conditions. Should the waterproof housing or the camera lens get scratched or broken, additional housings and replacement lens kits are available from the manufacturer.

System Requirements

Computer Compatibility: The HD Hero camera is compatible with Windows (Me, 2000, XP, Vista, and Windows 7) and Macintosh (OS X v10.2 or later) operating systems.

Mounting Options

Waterproof Housing: The HD Helmet Hero comes with a clear, polycarbonate and stainless steel waterproof housing. It has a depth rating of 180 feet. It has two external buttons to allow you to change the camera settings and press the shutter button without removing the camera from the housing. The back door of the housing can be removed and replaced with a non-waterproof back door (supplied). The non-waterproof back door allows more sound to reach the camera's microphone, and is recommended when water damage is not an issue.

Quick Release Mounting: The waterproof housing is mounted to a quick-release buckle that lets you adjust the tilt of the camera. The quick-release slips and locks into any of the supplied mounting bases. A rubberized plug locks the quick release into the base for extra security.

Helmet Mounting Bases: The HD Helmet Hero package includes a mounting base designed to be strapped to a vented helmet. The adjustable straps thread through the vents on the top of the helmet. Two curved-surface and two flat-surface mounts, each with industrial-grade adhesive, are provided for mounting the camera to a helmet, vehicle, or other smooth surface.

Head Strap Mount: In addition to the helmet mounts, the HD Helmet Hero comes with an adjustable head strap mount that you can wear.

Optional Mounts: GoPro offers numerous mounts for the HD Hero camera, including a wrist strap and chest harness. Other mounts can attach the camera to a bicycle seat post or handlebar, a roll bar, surfboard, suction cup, or tripod.