About the Sound Ordnance™ M-1350
Win the battle for great sound in your ride. Sound Ordnance amplifiers feature tough construction, rugged looks, and a 3-year warranty, so you can enjoy the full power of your music for the long haul. Even better, you can add Sound Ordnance to your arsenal at a surprisingly affordable price.
The Sound Ordnance M-1350 mono subwoofer amplifier packs a 350-watt wallop that'll give your subwoofers some serious firepower. An adjustable low-pass filter and a variable bass boost allow you to control your bass barrage at will.
The M-1350 amplifier uses sophisticated power supply and output technologies to ensure clean amplification from the input all the way to your speakers. Special circuits protect the amp from overheating and short circuits, and a turn-on delay virtually eliminates that annoying thump when you turn your system on.
- mono subwoofer amplifier
- 210 watts RMS x 1 at 4 ohms (350 watts RMS x 1 at 2 ohms)
- variable low-pass filter (40-300 Hz, 12 dB/octave)
- variable bass boost (0-12 dB, at 45 Hz)
- variable subsonic filter (10-40 Hz)
- PWM (pulse width modulation) power supply with MOSFET output
- preamp inputs and outputs
- fuse rating: 25A x 2
- 8-gauge power and ground leads recommended wiring and hardware not included with amplifier
- 13-5/16"W x 2-1/8"H x 9-13/16"D
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # M1350
What's in the box:
- Mono amplifier with two 25A ATC blade fuses inserted
- Spare 25A ATC blade fuse
- 4 Self-tapping screws (5/8" length)
- 4 Split lock washers
- 4 Flat washers
- Remote bass control module
- 16.5' Remote bass control cable (with 6-pin RJ25 modular phone plugs on each end)
- 2 Self-tapping screws (3/8" length)
- 2 Small split lock washers
- Owner's Manual
Sound Ordnance™ M-1350 reviews
Thanks for submitting your review
More details on the Sound Ordnance™ M-1350
Features & specs
|RMS Power Output (Watts x Channels)||
210 x 1 |
|Peak Power Output (Watts x Channels)||750 x 1|
|Power at 2 Ohms (Watts x Channels)||350 x 1|
|Bridged Power (Watts x Channels)||N/A|
|Minimum Impedance Bridged||N/A|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||12-300 Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||110 dB|
|Low-Pass Crossover Frequency||40-300 Hz|
|Low-Pass Slope (dB/octave)||12 dB/oct|
|High-Pass Crossover Frequency||N/A|
|High-Pass Slope (dB/octave)||---|
|Bass Boost||0-12 dB|
|Bass Boost Frequency||45 Hz|
|Speaker Level Inputs||---|
|Preamp Outputs||1 pair|
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
Power Ratings: The Sound Ordnance M-1350 is a mono-block Class AB amplifier with an RMS power rating of 210 watts per channel into 4 ohms, and 350 watts per channel into 2 ohms.Power ratings are measured with an input power of 14.4 volts.
Crossovers: The M-1350 is equipped with a low-pass crossover and a subsonic filter. You can set the low-pass cutoff frequency between 40Hz and 300Hz. The subsonic filter, designed to block ultra low frequencies that can damage speakers and rob amplifier power, is variable between 10Hz and 40Hz. The crossovers have a 12dB per octave slope, and cannot be turned off.
Bass Boost: The amplifier has a rotary bass boost control, which is continuously variable from 0dB to +12dB at 45 Hz.
LED Indicators: The M-1350 features two LED indicators: a green LED that illuminates when the amp is powered on, and a red LED that illuminates when the amplifier is in protect mode due to overheating or a short circuit in the speaker wire.
Remote Bass Control: The amplifier comes with a remote bass control module to allow you to adjust the volume of the amp from the front of the vehicle. The module has a rotary volume control knob, and an LED to indicate when the amplifier is turned on. The module is designed to mount under the dash, and comes with 16-1/2 feet of cable.
Removable End Caps: The end caps on the M-1350 are removable with a 3mm Allen wrench (not supplied) to make it easier to attach the power and speaker wires.
Power Connections: The power and ground connections are set screw terminals that will accommodate up to 8-gauge wire. (An 8-gauge amplifier wiring kit is recommended.) The remote turn-on terminal is a set screw terminal that will also accept up to 8-gauge wire. A Phillips-head screwdriver (not supplied) is required to tighten/loosen the terminals.
Speaker Connections: The speaker connections are set screw terminals that will accommodate up to 8-gauge wire. Even though this is a mono amplifier, there are two sets of speaker outputs. The terminals are wired in parallel internally, allowing you to connect two 4-ohm speakers to separate terminals. A Phillips-head screwdriver (not supplied) is required to tighten/loosen the terminals.
RCA Inputs and Outputs: The amplifier features a pair of stereo RCA inputs for connecting your head unit. There is also a pair of stereo RCA outputs for feeding the preamp signal to another amplifier, if needed.
Fuses: The M-1350 features two 25-amp ATC blade fuses.
The Sound Ordnance™ M-1350 replaces these items
5 questions already asked