Chat
Contact us
Close contact box
Connect ID #
139 271 965 3
Connect ID #
139 271 965 3
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

All of our representatives are
currently chatting with other customers.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to

Your Advisor,

More about me
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

iDatalink bCH3

Noise cancellation bypass harness for select 2017-up Chrysler Pacifica and 2019-up Ram trucks without a factory amplifier

Item # 794ANCCH3

Find what Fits your car

Item # 794ANCCH3

In stock
$9.99

About the iDatalink bCH3

Stop noise-cancelling feedback

Your vehicle's active noise cancellation system (ANC) plays havoc with an aftermarket system's output — with bass tones building up and then disappearing, over and over again. Whether you knew about this issue before you got your amp or sub, or found out the hard way, you need to disable the ANC in your vehicle in order to get good sound. iDatalink's bCH3 ANC bypass harness plugs into the factory wiring as a jumper that bypasses the noise cancellation module, allowing your new system to play the way it should.

Product highlights:

  • ANC bypass harness
  • for select 2017-up Chrysler Pacifica without a factory amplifier
    • ANC module located to the right of glove box, above passenger kick panel
  • for select 2019-up Ram truck without a factory amplifier
    • ANC module located under driver's seat
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # ACC-ANC-CH3

What's in the box:

  • 7" Bypass harness (22-pin plug on one end / 16-pin plug on other end)

Customer reviews

Loading reviews...

iDatalink bCH3 reviews

Average review:

26 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the iDatalink bCH3

Stacey B.

Product Research

Features

Overview: The iDatalink Maestro BCH3 harness lets you bypass your vehicle's active noise canceling module in select 2017- 2021 Chrysler and RAM vehicles, letting you install an aftermarket amplifier while maintaining good sound quality. The 7" bypass harness jumpers the input and output harnesses of the vehicle's noise canceling module (location will vary with vehicle).

Compatible Vehicles:

  • 2017-2020 Chrysler Pacifica: Without factory amplifier, with active noise canceling.
  • 2020-2021 Chrysler Voyager: Without factory amplifier, with active noise canceling.
  • 2019-2021 RAM 1500/2500/3500: Without factory amplifier, with active noise canceling.

Note: iDatalink Maestro is continually updating vehicle compatibility. Click here for the most current vehicle listing.

Loading accessories...

Customer Q&A

42 questions already asked

Q
It looks as if this module DOES work with the H/K system, but not the Alpine system. Is this correct? I have a bypass from my 2019 ram with the base system, and upgraded to a 2021 ram with the H/K. Will it work the same?
[ Nicholas  Apr 23, 2021 ]
1 answer
A
This unit only works in the Ram Pickups that come without an external amp and the HK system has an external amp. At this time, we do not have an ANC bypass harness for it. That may change in the future and I recommend contacting an advisor by calling 1-800-324-9695 to check
[ Paul  May 02, 2021 ]  Staff
Q
I have a 2019 ram 2500 big horn with the base six speaker system. The volume does not get louder after 22 and seems to go in and out. Will this rectify my problem? Also, where would this need to be plugged in if I don't have an amp?
[ john  Dec 29, 2020 ]
8 answers
A
This cable is designed to bypass the noise cancelation if you are adding an amplifier or a subwoofer to your truck.
[ PHILIP  Dec 30, 2020 ]
A
This plugs in under the drivers seat, it is a bypass for the anc module. But will not fix your issue... the problem is an internal software issue... supposedly Chrysler is working on an update to fix this issue, supposed to be out in the first quarter of 2021.
[ JOE  Dec 29, 2020 ]
A
For reference I have the 8.4inch non Navi head unit in a 2019 5th gen ram with the base six speaker system. I do not believe this will fix that problem. This will only bypass some of the fake engine sounds that's pumped in and it will block the ANC from not allowing you fully utilize aftermarket subwoofers. My volume does get louder after 22 before and after installing this. I had an issue where my speakers would intermittently cut out when played at higher volumes but I suspected that to happen because I had the stock 2 ohm speakers mixed with 4 ohm aftermarket speakers. When I upgraded all 6 speakers to 4ohm speakers that particular issue went away. Finally, you will install this under your driver seat, which is where the ANC module is installed. You will unplug the connections from the ANC module and connect it directly to the iDatalink bCH3 instead. This will bypass the ANC module entirely. I purchased this with the intent to upgrade to an aftermarket amplifier in the future.
[ MITCHELL  Dec 29, 2020 ]
A
While I did not have an issue with the volume topping out at 22, I did have the issue with the volume going in and out. Purchase and installing this item addressed the issue. Note that it is located under the steering column to the left-hand side, not under the driver seat as others have mentioned.
[ David  Dec 29, 2020 ]
A
Couple questions to answer this. 1. What engine? 2. Do you see the ANC unit under the drivers seat? If you do, then getting this harness will eliminate that box. Volume issues are 2 fold. 1. ANC and 2. Issues with USB over music. You'll find that listing to your truck, with NO usb devices or phones plugged in will be louder then if they were plugged in. Try listening to music from your phone.. First through USB... Then try Bluetooth (remove all cables) make sure your volume to your phone is at its max! You will notice Bluetooth is louder, and more clear when not using a USB cable. Removing ANC will help this a little bit. Next step, go to fader options.. And move the fader to the front 2-3 clicks. You'll also notice it gets louder and bass hits better! Factory deck can't push all the speakers as well as they should. So, I move the fader towards the front to allow the amp to power those better. Again, you'll notice it goes louder. In the end, all we have are work-arounds for better sound... Sadly no fix, other then adding amps. Again, I did my tricks with the radios settings.. And removed my ANC.. Added a mono block... purchased the subwoofer from Mopar direct for the HK radio system... I added this factory sub, with a kicker amp to fill the bottom end that's missing. Doing this saved me space, and gave me a full balanced sound. If you need more info, let me know.
[ DAVE  Dec 29, 2020 ]
A
There is also a update from dealership for the anc.
[ VINCENT  Dec 29, 2020 ]
A
Yes it will my speakers would cut out and come back on. This eliminates the noise control that cuts speakers off when loud.
[ VINCENT  Dec 29, 2020 ]
A
this replaces the box under the drivers seat. This may help you with your fading in and out.
[ DUANE  Dec 29, 2020 ]
Q
is there a wiring diagram for the iDatalink bCH3? like to tap into the wires here so i don't mess up my factory wiring. Adding a powered sub and need to tap into speaker wires.
[ paul  Dec 06, 2020 ]
2 answers
A
As mentioned... not only does this harness have the proper aftermarket color scheme for the wires, but they are in proper place. Tap off the front! White and gray wires! You don't want to tap off the rear. Many reasons.
[ DAVE  Dec 29, 2020 ]
A
Yes it does have a list of which color wires go to which speaker. Also has the pin diagram.
[ JACOB  Dec 08, 2020 ]
Q
After installing an amp and replacing the factory speakers (because the factory speakers are terrible) in my 2020 Ram Lonestar. I have this droning noise now, does this product REALLY bypass that droning noise? Or does it just makes it quieter?
[ Brian  Sep 01, 2020 ]
2 answers
A
Yes sir it actually bypasses the droning, I added a sub and the drone coming through it was horrible. This made it go completely away and I don't notice any difference when using my speakers to talk on the phone. Not to mention it takes longer to move your driver side seat forward than it does to install this. Hope this helps
[ RICARDO  Sep 04, 2020 ]
A
Assuming you have the base six speaker audio system this harness bypasses the ANC (active noise cancellation system). as you have added an amp and upgraded the speakers this has drastically improved the sound level inside your vehicle therefore I'm inclined to believe that bypassing the ANC module will rectify the droning due to the ANC module attempting to cancel out high noise levels now present in your cab from upgrades.
[ ALFRED  Sep 04, 2020 ]
Q
Do I connect this adaptor to the amp under the seat in my 2019 Ram big horn?
[ Jordan B  Aug 11, 2020 ]
5 answers
A
Under the drivers seat is the active noise control module it's not an amp. Yes this plugs in there. It is very easy to connect and disconnect. It helps with audio sound. It's still not perfect. From my half vast research there is another module for the ANS under the hood somewhere that I haven't figured out where it is and wether or not it can be disconnected. Sure would have been nice if Ram would have put an on off switch on the ANS.
[ Thomas  Aug 12, 2020 ]
A
Unhook the wires than Connect them together with the link if you need speaker hook up for an amplifier Those are speaker wires
[ CHARLES  Aug 11, 2020 ]
A
It does not go to the amp You disconnect the wire harness's from the amp and that adapter connects the wires together It is designed to bypass the amp or active noise control This does not cancel out the ANC all the way You still have to disconnect the mics in the headrest
[ Michael  Aug 11, 2020 ]
A
Yes is real easy
[ ALFONSO  Aug 11, 2020 ]
A
No. The ANC gets unplugged and the two harnesses that you unplug get connected. You can remove the ANC module entirely if you choose.
[ Troy  Aug 11, 2020 ]
Q
Does this product work for a 2020 Ram 1500 Laramie Edition?
[ Chris  Apr 01, 2020 ]
3 answers
A
If you have ANC with HK or Alpine, YES. ANC is a separate unit under the drivers seat.
[ DAVE  Dec 29, 2020 ]
A
This works for base 6 speaker stereo If you have Harman Kardan or Alpine it may not work.
[ SCOTT  Apr 01, 2020 ]
A
If it has the base 6 speaker system, then yes.
[ Troy  Apr 01, 2020 ]
Q
It looks as if this module DOES work with the H/K system, but not the Alpine system. Is this correct? I have a bypass from my 2019 ram with the base system, and upgraded to a 2021 ram with the H/K. Will it work the same?
[ Nicholas  Apr 23, 2021 ]
1 answer
A
This unit only works in the Ram Pickups that come without an external amp and the HK system has an external amp. At this time, we do not have an ANC bypass harness for it. That may change in the future and I recommend contacting an advisor by calling 1-800-324-9695 to check
[ Paul  May 02, 2021 ]  Staff
Q
I have a 2019 ram 2500 big horn with the base six speaker system. The volume does not get louder after 22 and seems to go in and out. Will this rectify my problem? Also, where would this need to be plugged in if I don't have an amp?
[ john  Dec 29, 2020 ]
8 answers
A
This cable is designed to bypass the noise cancelation if you are adding an amplifier or a subwoofer to your truck.
[ PHILIP  Dec 30, 2020 ]
A
This plugs in under the drivers seat, it is a bypass for the anc module. But will not fix your issue... the problem is an internal software issue... supposedly Chrysler is working on an update to fix this issue, supposed to be out in the first quarter of 2021.
[ JOE  Dec 29, 2020 ]
A
For reference I have the 8.4inch non Navi head unit in a 2019 5th gen ram with the base six speaker system. I do not believe this will fix that problem. This will only bypass some of the fake engine sounds that's pumped in and it will block the ANC from not allowing you fully utilize aftermarket subwoofers. My volume does get louder after 22 before and after installing this. I had an issue where my speakers would intermittently cut out when played at higher volumes but I suspected that to happen because I had the stock 2 ohm speakers mixed with 4 ohm aftermarket speakers. When I upgraded all 6 speakers to 4ohm speakers that particular issue went away. Finally, you will install this under your driver seat, which is where the ANC module is installed. You will unplug the connections from the ANC module and connect it directly to the iDatalink bCH3 instead. This will bypass the ANC module entirely. I purchased this with the intent to upgrade to an aftermarket amplifier in the future.
[ MITCHELL  Dec 29, 2020 ]
A
While I did not have an issue with the volume topping out at 22, I did have the issue with the volume going in and out. Purchase and installing this item addressed the issue. Note that it is located under the steering column to the left-hand side, not under the driver seat as others have mentioned.
[ David  Dec 29, 2020 ]
A
Couple questions to answer this. 1. What engine? 2. Do you see the ANC unit under the drivers seat? If you do, then getting this harness will eliminate that box. Volume issues are 2 fold. 1. ANC and 2. Issues with USB over music. You'll find that listing to your truck, with NO usb devices or phones plugged in will be louder then if they were plugged in. Try listening to music from your phone.. First through USB... Then try Bluetooth (remove all cables) make sure your volume to your phone is at its max! You will notice Bluetooth is louder, and more clear when not using a USB cable. Removing ANC will help this a little bit. Next step, go to fader options.. And move the fader to the front 2-3 clicks. You'll also notice it gets louder and bass hits better! Factory deck can't push all the speakers as well as they should. So, I move the fader towards the front to allow the amp to power those better. Again, you'll notice it goes louder. In the end, all we have are work-arounds for better sound... Sadly no fix, other then adding amps. Again, I did my tricks with the radios settings.. And removed my ANC.. Added a mono block... purchased the subwoofer from Mopar direct for the HK radio system... I added this factory sub, with a kicker amp to fill the bottom end that's missing. Doing this saved me space, and gave me a full balanced sound. If you need more info, let me know.
[ DAVE  Dec 29, 2020 ]
A
There is also a update from dealership for the anc.
[ VINCENT  Dec 29, 2020 ]
A
Yes it will my speakers would cut out and come back on. This eliminates the noise control that cuts speakers off when loud.
[ VINCENT  Dec 29, 2020 ]
A
this replaces the box under the drivers seat. This may help you with your fading in and out.
[ DUANE  Dec 29, 2020 ]
Q
is there a wiring diagram for the iDatalink bCH3? like to tap into the wires here so i don't mess up my factory wiring. Adding a powered sub and need to tap into speaker wires.
[ paul  Dec 06, 2020 ]
2 answers
A
As mentioned... not only does this harness have the proper aftermarket color scheme for the wires, but they are in proper place. Tap off the front! White and gray wires! You don't want to tap off the rear. Many reasons.
[ DAVE  Dec 29, 2020 ]
A
Yes it does have a list of which color wires go to which speaker. Also has the pin diagram.
[ JACOB  Dec 08, 2020 ]
Q
After installing an amp and replacing the factory speakers (because the factory speakers are terrible) in my 2020 Ram Lonestar. I have this droning noise now, does this product REALLY bypass that droning noise? Or does it just makes it quieter?
[ Brian  Sep 01, 2020 ]
2 answers
A
Yes sir it actually bypasses the droning, I added a sub and the drone coming through it was horrible. This made it go completely away and I don't notice any difference when using my speakers to talk on the phone. Not to mention it takes longer to move your driver side seat forward than it does to install this. Hope this helps
[ RICARDO  Sep 04, 2020 ]
A
Assuming you have the base six speaker audio system this harness bypasses the ANC (active noise cancellation system). as you have added an amp and upgraded the speakers this has drastically improved the sound level inside your vehicle therefore I'm inclined to believe that bypassing the ANC module will rectify the droning due to the ANC module attempting to cancel out high noise levels now present in your cab from upgrades.
[ ALFRED  Sep 04, 2020 ]
Q
Do I connect this adaptor to the amp under the seat in my 2019 Ram big horn?
[ Jordan B  Aug 11, 2020 ]
5 answers
A
Under the drivers seat is the active noise control module it's not an amp. Yes this plugs in there. It is very easy to connect and disconnect. It helps with audio sound. It's still not perfect. From my half vast research there is another module for the ANS under the hood somewhere that I haven't figured out where it is and wether or not it can be disconnected. Sure would have been nice if Ram would have put an on off switch on the ANS.
[ Thomas  Aug 12, 2020 ]
A
Unhook the wires than Connect them together with the link if you need speaker hook up for an amplifier Those are speaker wires
[ CHARLES  Aug 11, 2020 ]
A
It does not go to the amp You disconnect the wire harness's from the amp and that adapter connects the wires together It is designed to bypass the amp or active noise control This does not cancel out the ANC all the way You still have to disconnect the mics in the headrest
[ Michael  Aug 11, 2020 ]
A
Yes is real easy
[ ALFONSO  Aug 11, 2020 ]
A
No. The ANC gets unplugged and the two harnesses that you unplug get connected. You can remove the ANC module entirely if you choose.
[ Troy  Aug 11, 2020 ]
Q
Does this product work for a 2020 Ram 1500 Laramie Edition?
[ Chris  Apr 01, 2020 ]
3 answers
A
If you have ANC with HK or Alpine, YES. ANC is a separate unit under the drivers seat.
[ DAVE  Dec 29, 2020 ]
A
This works for base 6 speaker stereo If you have Harman Kardan or Alpine it may not work.
[ SCOTT  Apr 01, 2020 ]
A
If it has the base 6 speaker system, then yes.
[ Troy  Apr 01, 2020 ]
Q
It looks as if this module DOES work with the H/K system, but not the Alpine system. Is this correct? I have a bypass from my 2019 ram with the base system, and upgraded to a 2021 ram with the H/K. Will it work the same?
[ Nicholas  Apr 23, 2021 ]
1 answer
A
This unit only works in the Ram Pickups that come without an external amp and the HK system has an external amp. At this time, we do not have an ANC bypass harness for it. That may change in the future and I recommend contacting an advisor by calling 1-800-324-9695 to check
[ Paul  May 02, 2021 ]  Staff
Q
I have a 2019 ram 2500 big horn with the base six speaker system. The volume does not get louder after 22 and seems to go in and out. Will this rectify my problem? Also, where would this need to be plugged in if I don't have an amp?
[ john  Dec 29, 2020 ]
8 answers
A
This cable is designed to bypass the noise cancelation if you are adding an amplifier or a subwoofer to your truck.
[ PHILIP  Dec 30, 2020 ]
A
This plugs in under the drivers seat, it is a bypass for the anc module. But will not fix your issue... the problem is an internal software issue... supposedly Chrysler is working on an update to fix this issue, supposed to be out in the first quarter of 2021.
[ JOE  Dec 29, 2020 ]
A
For reference I have the 8.4inch non Navi head unit in a 2019 5th gen ram with the base six speaker system. I do not believe this will fix that problem. This will only bypass some of the fake engine sounds that's pumped in and it will block the ANC from not allowing you fully utilize aftermarket subwoofers. My volume does get louder after 22 before and after installing this. I had an issue where my speakers would intermittently cut out when played at higher volumes but I suspected that to happen because I had the stock 2 ohm speakers mixed with 4 ohm aftermarket speakers. When I upgraded all 6 speakers to 4ohm speakers that particular issue went away. Finally, you will install this under your driver seat, which is where the ANC module is installed. You will unplug the connections from the ANC module and connect it directly to the iDatalink bCH3 instead. This will bypass the ANC module entirely. I purchased this with the intent to upgrade to an aftermarket amplifier in the future.
[ MITCHELL  Dec 29, 2020 ]
A
While I did not have an issue with the volume topping out at 22, I did have the issue with the volume going in and out. Purchase and installing this item addressed the issue. Note that it is located under the steering column to the left-hand side, not under the driver seat as others have mentioned.
[ David  Dec 29, 2020 ]
A
Couple questions to answer this. 1. What engine? 2. Do you see the ANC unit under the drivers seat? If you do, then getting this harness will eliminate that box. Volume issues are 2 fold. 1. ANC and 2. Issues with USB over music. You'll find that listing to your truck, with NO usb devices or phones plugged in will be louder then if they were plugged in. Try listening to music from your phone.. First through USB... Then try Bluetooth (remove all cables) make sure your volume to your phone is at its max! You will notice Bluetooth is louder, and more clear when not using a USB cable. Removing ANC will help this a little bit. Next step, go to fader options.. And move the fader to the front 2-3 clicks. You'll also notice it gets louder and bass hits better! Factory deck can't push all the speakers as well as they should. So, I move the fader towards the front to allow the amp to power those better. Again, you'll notice it goes louder. In the end, all we have are work-arounds for better sound... Sadly no fix, other then adding amps. Again, I did my tricks with the radios settings.. And removed my ANC.. Added a mono block... purchased the subwoofer from Mopar direct for the HK radio system... I added this factory sub, with a kicker amp to fill the bottom end that's missing. Doing this saved me space, and gave me a full balanced sound. If you need more info, let me know.
[ DAVE  Dec 29, 2020 ]
A
There is also a update from dealership for the anc.
[ VINCENT  Dec 29, 2020 ]
A
Yes it will my speakers would cut out and come back on. This eliminates the noise control that cuts speakers off when loud.
[ VINCENT  Dec 29, 2020 ]
A
this replaces the box under the drivers seat. This may help you with your fading in and out.
[ DUANE  Dec 29, 2020 ]
Q
is there a wiring diagram for the iDatalink bCH3? like to tap into the wires here so i don't mess up my factory wiring. Adding a powered sub and need to tap into speaker wires.
[ paul  Dec 06, 2020 ]
2 answers
A
As mentioned... not only does this harness have the proper aftermarket color scheme for the wires, but they are in proper place. Tap off the front! White and gray wires! You don't want to tap off the rear. Many reasons.
[ DAVE  Dec 29, 2020 ]
A
Yes it does have a list of which color wires go to which speaker. Also has the pin diagram.
[ JACOB  Dec 08, 2020 ]
Q
After installing an amp and replacing the factory speakers (because the factory speakers are terrible) in my 2020 Ram Lonestar. I have this droning noise now, does this product REALLY bypass that droning noise? Or does it just makes it quieter?
[ Brian  Sep 01, 2020 ]
2 answers
A
Yes sir it actually bypasses the droning, I added a sub and the drone coming through it was horrible. This made it go completely away and I don't notice any difference when using my speakers to talk on the phone. Not to mention it takes longer to move your driver side seat forward than it does to install this. Hope this helps
[ RICARDO  Sep 04, 2020 ]
A
Assuming you have the base six speaker audio system this harness bypasses the ANC (active noise cancellation system). as you have added an amp and upgraded the speakers this has drastically improved the sound level inside your vehicle therefore I'm inclined to believe that bypassing the ANC module will rectify the droning due to the ANC module attempting to cancel out high noise levels now present in your cab from upgrades.
[ ALFRED  Sep 04, 2020 ]
Q
Do I connect this adaptor to the amp under the seat in my 2019 Ram big horn?
[ Jordan B  Aug 11, 2020 ]
5 answers
A
Under the drivers seat is the active noise control module it's not an amp. Yes this plugs in there. It is very easy to connect and disconnect. It helps with audio sound. It's still not perfect. From my half vast research there is another module for the ANS under the hood somewhere that I haven't figured out where it is and wether or not it can be disconnected. Sure would have been nice if Ram would have put an on off switch on the ANS.
[ Thomas  Aug 12, 2020 ]
A
Unhook the wires than Connect them together with the link if you need speaker hook up for an amplifier Those are speaker wires
[ CHARLES  Aug 11, 2020 ]
A
It does not go to the amp You disconnect the wire harness's from the amp and that adapter connects the wires together It is designed to bypass the amp or active noise control This does not cancel out the ANC all the way You still have to disconnect the mics in the headrest
[ Michael  Aug 11, 2020 ]
A
Yes is real easy
[ ALFONSO  Aug 11, 2020 ]
A
No. The ANC gets unplugged and the two harnesses that you unplug get connected. You can remove the ANC module entirely if you choose.
[ Troy  Aug 11, 2020 ]
Q
Does this product work for a 2020 Ram 1500 Laramie Edition?
[ Chris  Apr 01, 2020 ]
3 answers
A
If you have ANC with HK or Alpine, YES. ANC is a separate unit under the drivers seat.
[ DAVE  Dec 29, 2020 ]
A
This works for base 6 speaker stereo If you have Harman Kardan or Alpine it may not work.
[ SCOTT  Apr 01, 2020 ]
A
If it has the base 6 speaker system, then yes.
[ Troy  Apr 01, 2020 ]
Q
It looks as if this module DOES work with the H/K system, but not the Alpine system. Is this correct? I have a bypass from my 2019 ram with the base system, and upgraded to a 2021 ram with the H/K. Will it work the same?
[ Nicholas  Apr 23, 2021 ]
1 answer
A
This unit only works in the Ram Pickups that come without an external amp and the HK system has an external amp. At this time, we do not have an ANC bypass harness for it. That may change in the future and I recommend contacting an advisor by calling 1-800-324-9695 to check
[ Paul  May 02, 2021 ]  Staff
Q
I have a 2019 ram 2500 big horn with the base six speaker system. The volume does not get louder after 22 and seems to go in and out. Will this rectify my problem? Also, where would this need to be plugged in if I don't have an amp?
[ john  Dec 29, 2020 ]
8 answers
A
This cable is designed to bypass the noise cancelation if you are adding an amplifier or a subwoofer to your truck.
[ PHILIP  Dec 30, 2020 ]
A
This plugs in under the drivers seat, it is a bypass for the anc module. But will not fix your issue... the problem is an internal software issue... supposedly Chrysler is working on an update to fix this issue, supposed to be out in the first quarter of 2021.
[ JOE  Dec 29, 2020 ]
A
For reference I have the 8.4inch non Navi head unit in a 2019 5th gen ram with the base six speaker system. I do not believe this will fix that problem. This will only bypass some of the fake engine sounds that's pumped in and it will block the ANC from not allowing you fully utilize aftermarket subwoofers. My volume does get louder after 22 before and after installing this. I had an issue where my speakers would intermittently cut out when played at higher volumes but I suspected that to happen because I had the stock 2 ohm speakers mixed with 4 ohm aftermarket speakers. When I upgraded all 6 speakers to 4ohm speakers that particular issue went away. Finally, you will install this under your driver seat, which is where the ANC module is installed. You will unplug the connections from the ANC module and connect it directly to the iDatalink bCH3 instead. This will bypass the ANC module entirely. I purchased this with the intent to upgrade to an aftermarket amplifier in the future.
[ MITCHELL  Dec 29, 2020 ]
A
While I did not have an issue with the volume topping out at 22, I did have the issue with the volume going in and out. Purchase and installing this item addressed the issue. Note that it is located under the steering column to the left-hand side, not under the driver seat as others have mentioned.
[ David  Dec 29, 2020 ]
A
Couple questions to answer this. 1. What engine? 2. Do you see the ANC unit under the drivers seat? If you do, then getting this harness will eliminate that box. Volume issues are 2 fold. 1. ANC and 2. Issues with USB over music. You'll find that listing to your truck, with NO usb devices or phones plugged in will be louder then if they were plugged in. Try listening to music from your phone.. First through USB... Then try Bluetooth (remove all cables) make sure your volume to your phone is at its max! You will notice Bluetooth is louder, and more clear when not using a USB cable. Removing ANC will help this a little bit. Next step, go to fader options.. And move the fader to the front 2-3 clicks. You'll also notice it gets louder and bass hits better! Factory deck can't push all the speakers as well as they should. So, I move the fader towards the front to allow the amp to power those better. Again, you'll notice it goes louder. In the end, all we have are work-arounds for better sound... Sadly no fix, other then adding amps. Again, I did my tricks with the radios settings.. And removed my ANC.. Added a mono block... purchased the subwoofer from Mopar direct for the HK radio system... I added this factory sub, with a kicker amp to fill the bottom end that's missing. Doing this saved me space, and gave me a full balanced sound. If you need more info, let me know.
[ DAVE  Dec 29, 2020 ]
A
There is also a update from dealership for the anc.
[ VINCENT  Dec 29, 2020 ]
A
Yes it will my speakers would cut out and come back on. This eliminates the noise control that cuts speakers off when loud.
[ VINCENT  Dec 29, 2020 ]
A
this replaces the box under the drivers seat. This may help you with your fading in and out.
[ DUANE  Dec 29, 2020 ]
Q
is there a wiring diagram for the iDatalink bCH3? like to tap into the wires here so i don't mess up my factory wiring. Adding a powered sub and need to tap into speaker wires.
[ paul  Dec 06, 2020 ]
2 answers
A
As mentioned... not only does this harness have the proper aftermarket color scheme for the wires, but they are in proper place. Tap off the front! White and gray wires! You don't want to tap off the rear. Many reasons.
[ DAVE  Dec 29, 2020 ]
A
Yes it does have a list of which color wires go to which speaker. Also has the pin diagram.
[ JACOB  Dec 08, 2020 ]
Q
After installing an amp and replacing the factory speakers (because the factory speakers are terrible) in my 2020 Ram Lonestar. I have this droning noise now, does this product REALLY bypass that droning noise? Or does it just makes it quieter?
[ Brian  Sep 01, 2020 ]
2 answers
A
Yes sir it actually bypasses the droning, I added a sub and the drone coming through it was horrible. This made it go completely away and I don't notice any difference when using my speakers to talk on the phone. Not to mention it takes longer to move your driver side seat forward than it does to install this. Hope this helps
[ RICARDO  Sep 04, 2020 ]
A
Assuming you have the base six speaker audio system this harness bypasses the ANC (active noise cancellation system). as you have added an amp and upgraded the speakers this has drastically improved the sound level inside your vehicle therefore I'm inclined to believe that bypassing the ANC module will rectify the droning due to the ANC module attempting to cancel out high noise levels now present in your cab from upgrades.
[ ALFRED  Sep 04, 2020 ]
Q
Do I connect this adaptor to the amp under the seat in my 2019 Ram big horn?
[ Jordan B  Aug 11, 2020 ]
5 answers
A
Under the drivers seat is the active noise control module it's not an amp. Yes this plugs in there. It is very easy to connect and disconnect. It helps with audio sound. It's still not perfect. From my half vast research there is another module for the ANS under the hood somewhere that I haven't figured out where it is and wether or not it can be disconnected. Sure would have been nice if Ram would have put an on off switch on the ANS.
[ Thomas  Aug 12, 2020 ]
A
Unhook the wires than Connect them together with the link if you need speaker hook up for an amplifier Those are speaker wires
[ CHARLES  Aug 11, 2020 ]
A
It does not go to the amp You disconnect the wire harness's from the amp and that adapter connects the wires together It is designed to bypass the amp or active noise control This does not cancel out the ANC all the way You still have to disconnect the mics in the headrest
[ Michael  Aug 11, 2020 ]
A
Yes is real easy
[ ALFONSO  Aug 11, 2020 ]
A
No. The ANC gets unplugged and the two harnesses that you unplug get connected. You can remove the ANC module entirely if you choose.
[ Troy  Aug 11, 2020 ]
Q
Does this product work for a 2020 Ram 1500 Laramie Edition?
[ Chris  Apr 01, 2020 ]
3 answers
A
If you have ANC with HK or Alpine, YES. ANC is a separate unit under the drivers seat.
[ DAVE  Dec 29, 2020 ]
A
This works for base 6 speaker stereo If you have Harman Kardan or Alpine it may not work.
[ SCOTT  Apr 01, 2020 ]
A
If it has the base 6 speaker system, then yes.
[ Troy  Apr 01, 2020 ]
Q
It looks as if this module DOES work with the H/K system, but not the Alpine system. Is this correct? I have a bypass from my 2019 ram with the base system, and upgraded to a 2021 ram with the H/K. Will it work the same?
[ Nicholas  Apr 23, 2021 ]
1 answer
A
This unit only works in the Ram Pickups that come without an external amp and the HK system has an external amp. At this time, we do not have an ANC bypass harness for it. That may change in the future and I recommend contacting an advisor by calling 1-800-324-9695 to check
[ Paul  May 02, 2021 ]  Staff
Q
I have a 2019 ram 2500 big horn with the base six speaker system. The volume does not get louder after 22 and seems to go in and out. Will this rectify my problem? Also, where would this need to be plugged in if I don't have an amp?
[ john  Dec 29, 2020 ]
8 answers
A
This cable is designed to bypass the noise cancelation if you are adding an amplifier or a subwoofer to your truck.
[ PHILIP  Dec 30, 2020 ]
A
This plugs in under the drivers seat, it is a bypass for the anc module. But will not fix your issue... the problem is an internal software issue... supposedly Chrysler is working on an update to fix this issue, supposed to be out in the first quarter of 2021.
[ JOE  Dec 29, 2020 ]
A
For reference I have the 8.4inch non Navi head unit in a 2019 5th gen ram with the base six speaker system. I do not believe this will fix that problem. This will only bypass some of the fake engine sounds that's pumped in and it will block the ANC from not allowing you fully utilize aftermarket subwoofers. My volume does get louder after 22 before and after installing this. I had an issue where my speakers would intermittently cut out when played at higher volumes but I suspected that to happen because I had the stock 2 ohm speakers mixed with 4 ohm aftermarket speakers. When I upgraded all 6 speakers to 4ohm speakers that particular issue went away. Finally, you will install this under your driver seat, which is where the ANC module is installed. You will unplug the connections from the ANC module and connect it directly to the iDatalink bCH3 instead. This will bypass the ANC module entirely. I purchased this with the intent to upgrade to an aftermarket amplifier in the future.
[ MITCHELL  Dec 29, 2020 ]
A
While I did not have an issue with the volume topping out at 22, I did have the issue with the volume going in and out. Purchase and installing this item addressed the issue. Note that it is located under the steering column to the left-hand side, not under the driver seat as others have mentioned.
[ David  Dec 29, 2020 ]
A
Couple questions to answer this. 1. What engine? 2. Do you see the ANC unit under the drivers seat? If you do, then getting this harness will eliminate that box. Volume issues are 2 fold. 1. ANC and 2. Issues with USB over music. You'll find that listing to your truck, with NO usb devices or phones plugged in will be louder then if they were plugged in. Try listening to music from your phone.. First through USB... Then try Bluetooth (remove all cables) make sure your volume to your phone is at its max! You will notice Bluetooth is louder, and more clear when not using a USB cable. Removing ANC will help this a little bit. Next step, go to fader options.. And move the fader to the front 2-3 clicks. You'll also notice it gets louder and bass hits better! Factory deck can't push all the speakers as well as they should. So, I move the fader towards the front to allow the amp to power those better. Again, you'll notice it goes louder. In the end, all we have are work-arounds for better sound... Sadly no fix, other then adding amps. Again, I did my tricks with the radios settings.. And removed my ANC.. Added a mono block... purchased the subwoofer from Mopar direct for the HK radio system... I added this factory sub, with a kicker amp to fill the bottom end that's missing. Doing this saved me space, and gave me a full balanced sound. If you need more info, let me know.
[ DAVE  Dec 29, 2020 ]
A
There is also a update from dealership for the anc.
[ VINCENT  Dec 29, 2020 ]
A
Yes it will my speakers would cut out and come back on. This eliminates the noise control that cuts speakers off when loud.
[ VINCENT  Dec 29, 2020 ]
A
this replaces the box under the drivers seat. This may help you with your fading in and out.
[ DUANE  Dec 29, 2020 ]
Q
is there a wiring diagram for the iDatalink bCH3? like to tap into the wires here so i don't mess up my factory wiring. Adding a powered sub and need to tap into speaker wires.
[ paul  Dec 06, 2020 ]
2 answers
A
As mentioned... not only does this harness have the proper aftermarket color scheme for the wires, but they are in proper place. Tap off the front! White and gray wires! You don't want to tap off the rear. Many reasons.
[ DAVE  Dec 29, 2020 ]
A
Yes it does have a list of which color wires go to which speaker. Also has the pin diagram.
[ JACOB  Dec 08, 2020 ]
Q
After installing an amp and replacing the factory speakers (because the factory speakers are terrible) in my 2020 Ram Lonestar. I have this droning noise now, does this product REALLY bypass that droning noise? Or does it just makes it quieter?
[ Brian  Sep 01, 2020 ]
2 answers
A
Yes sir it actually bypasses the droning, I added a sub and the drone coming through it was horrible. This made it go completely away and I don't notice any difference when using my speakers to talk on the phone. Not to mention it takes longer to move your driver side seat forward than it does to install this. Hope this helps
[ RICARDO  Sep 04, 2020 ]
A
Assuming you have the base six speaker audio system this harness bypasses the ANC (active noise cancellation system). as you have added an amp and upgraded the speakers this has drastically improved the sound level inside your vehicle therefore I'm inclined to believe that bypassing the ANC module will rectify the droning due to the ANC module attempting to cancel out high noise levels now present in your cab from upgrades.
[ ALFRED  Sep 04, 2020 ]
Q
Do I connect this adaptor to the amp under the seat in my 2019 Ram big horn?
[ Jordan B  Aug 11, 2020 ]
5 answers
A
Under the drivers seat is the active noise control module it's not an amp. Yes this plugs in there. It is very easy to connect and disconnect. It helps with audio sound. It's still not perfect. From my half vast research there is another module for the ANS under the hood somewhere that I haven't figured out where it is and wether or not it can be disconnected. Sure would have been nice if Ram would have put an on off switch on the ANS.
[ Thomas  Aug 12, 2020 ]
A
Unhook the wires than Connect them together with the link if you need speaker hook up for an amplifier Those are speaker wires
[ CHARLES  Aug 11, 2020 ]
A
It does not go to the amp You disconnect the wire harness's from the amp and that adapter connects the wires together It is designed to bypass the amp or active noise control This does not cancel out the ANC all the way You still have to disconnect the mics in the headrest
[ Michael  Aug 11, 2020 ]
A
Yes is real easy
[ ALFONSO  Aug 11, 2020 ]
A
No. The ANC gets unplugged and the two harnesses that you unplug get connected. You can remove the ANC module entirely if you choose.
[ Troy  Aug 11, 2020 ]
Q
Does this product work for a 2020 Ram 1500 Laramie Edition?
[ Chris  Apr 01, 2020 ]
3 answers
A
If you have ANC with HK or Alpine, YES. ANC is a separate unit under the drivers seat.
[ DAVE  Dec 29, 2020 ]
A
This works for base 6 speaker stereo If you have Harman Kardan or Alpine it may not work.
[ SCOTT  Apr 01, 2020 ]
A
If it has the base 6 speaker system, then yes.
[ Troy  Apr 01, 2020 ]
Q
It looks as if this module DOES work with the H/K system, but not the Alpine system. Is this correct? I have a bypass from my 2019 ram with the base system, and upgraded to a 2021 ram with the H/K. Will it work the same?
[ Nicholas  Apr 23, 2021 ]
1 answer
A
This unit only works in the Ram Pickups that come without an external amp and the HK system has an external amp. At this time, we do not have an ANC bypass harness for it. That may change in the future and I recommend contacting an advisor by calling 1-800-324-9695 to check
[ Paul  May 02, 2021 ]  Staff
Q
I have a 2019 ram 2500 big horn with the base six speaker system. The volume does not get louder after 22 and seems to go in and out. Will this rectify my problem? Also, where would this need to be plugged in if I don't have an amp?
[ john  Dec 29, 2020 ]
8 answers
A
This cable is designed to bypass the noise cancelation if you are adding an amplifier or a subwoofer to your truck.
[ PHILIP  Dec 30, 2020 ]
A
This plugs in under the drivers seat, it is a bypass for the anc module. But will not fix your issue... the problem is an internal software issue... supposedly Chrysler is working on an update to fix this issue, supposed to be out in the first quarter of 2021.
[ JOE  Dec 29, 2020 ]
A
For reference I have the 8.4inch non Navi head unit in a 2019 5th gen ram with the base six speaker system. I do not believe this will fix that problem. This will only bypass some of the fake engine sounds that's pumped in and it will block the ANC from not allowing you fully utilize aftermarket subwoofers. My volume does get louder after 22 before and after installing this. I had an issue where my speakers would intermittently cut out when played at higher volumes but I suspected that to happen because I had the stock 2 ohm speakers mixed with 4 ohm aftermarket speakers. When I upgraded all 6 speakers to 4ohm speakers that particular issue went away. Finally, you will install this under your driver seat, which is where the ANC module is installed. You will unplug the connections from the ANC module and connect it directly to the iDatalink bCH3 instead. This will bypass the ANC module entirely. I purchased this with the intent to upgrade to an aftermarket amplifier in the future.
[ MITCHELL  Dec 29, 2020 ]
A
While I did not have an issue with the volume topping out at 22, I did have the issue with the volume going in and out. Purchase and installing this item addressed the issue. Note that it is located under the steering column to the left-hand side, not under the driver seat as others have mentioned.
[ David  Dec 29, 2020 ]
A
Couple questions to answer this. 1. What engine? 2. Do you see the ANC unit under the drivers seat? If you do, then getting this harness will eliminate that box. Volume issues are 2 fold. 1. ANC and 2. Issues with USB over music. You'll find that listing to your truck, with NO usb devices or phones plugged in will be louder then if they were plugged in. Try listening to music from your phone.. First through USB... Then try Bluetooth (remove all cables) make sure your volume to your phone is at its max! You will notice Bluetooth is louder, and more clear when not using a USB cable. Removing ANC will help this a little bit. Next step, go to fader options.. And move the fader to the front 2-3 clicks. You'll also notice it gets louder and bass hits better! Factory deck can't push all the speakers as well as they should. So, I move the fader towards the front to allow the amp to power those better. Again, you'll notice it goes louder. In the end, all we have are work-arounds for better sound... Sadly no fix, other then adding amps. Again, I did my tricks with the radios settings.. And removed my ANC.. Added a mono block... purchased the subwoofer from Mopar direct for the HK radio system... I added this factory sub, with a kicker amp to fill the bottom end that's missing. Doing this saved me space, and gave me a full balanced sound. If you need more info, let me know.
[ DAVE  Dec 29, 2020 ]
A
There is also a update from dealership for the anc.
[ VINCENT  Dec 29, 2020 ]
A
Yes it will my speakers would cut out and come back on. This eliminates the noise control that cuts speakers off when loud.
[ VINCENT  Dec 29, 2020 ]
A
this replaces the box under the drivers seat. This may help you with your fading in and out.
[ DUANE  Dec 29, 2020 ]
Q
is there a wiring diagram for the iDatalink bCH3? like to tap into the wires here so i don't mess up my factory wiring. Adding a powered sub and need to tap into speaker wires.
[ paul  Dec 06, 2020 ]
2 answers
A
As mentioned... not only does this harness have the proper aftermarket color scheme for the wires, but they are in proper place. Tap off the front! White and gray wires! You don't want to tap off the rear. Many reasons.
[ DAVE  Dec 29, 2020 ]
A
Yes it does have a list of which color wires go to which speaker. Also has the pin diagram.
[ JACOB  Dec 08, 2020 ]
Q
After installing an amp and replacing the factory speakers (because the factory speakers are terrible) in my 2020 Ram Lonestar. I have this droning noise now, does this product REALLY bypass that droning noise? Or does it just makes it quieter?
[ Brian  Sep 01, 2020 ]
2 answers
A
Yes sir it actually bypasses the droning, I added a sub and the drone coming through it was horrible. This made it go completely away and I don't notice any difference when using my speakers to talk on the phone. Not to mention it takes longer to move your driver side seat forward than it does to install this. Hope this helps
[ RICARDO  Sep 04, 2020 ]
A
Assuming you have the base six speaker audio system this harness bypasses the ANC (active noise cancellation system). as you have added an amp and upgraded the speakers this has drastically improved the sound level inside your vehicle therefore I'm inclined to believe that bypassing the ANC module will rectify the droning due to the ANC module attempting to cancel out high noise levels now present in your cab from upgrades.
[ ALFRED  Sep 04, 2020 ]
Q
Do I connect this adaptor to the amp under the seat in my 2019 Ram big horn?
[ Jordan B  Aug 11, 2020 ]
5 answers
A
Under the drivers seat is the active noise control module it's not an amp. Yes this plugs in there. It is very easy to connect and disconnect. It helps with audio sound. It's still not perfect. From my half vast research there is another module for the ANS under the hood somewhere that I haven't figured out where it is and wether or not it can be disconnected. Sure would have been nice if Ram would have put an on off switch on the ANS.
[ Thomas  Aug 12, 2020 ]
A
Unhook the wires than Connect them together with the link if you need speaker hook up for an amplifier Those are speaker wires
[ CHARLES  Aug 11, 2020 ]
A
It does not go to the amp You disconnect the wire harness's from the amp and that adapter connects the wires together It is designed to bypass the amp or active noise control This does not cancel out the ANC all the way You still have to disconnect the mics in the headrest
[ Michael  Aug 11, 2020 ]
A
Yes is real easy
[ ALFONSO  Aug 11, 2020 ]
A
No. The ANC gets unplugged and the two harnesses that you unplug get connected. You can remove the ANC module entirely if you choose.
[ Troy  Aug 11, 2020 ]
Q
Does this product work for a 2020 Ram 1500 Laramie Edition?
[ Chris  Apr 01, 2020 ]
3 answers
A
If you have ANC with HK or Alpine, YES. ANC is a separate unit under the drivers seat.
[ DAVE  Dec 29, 2020 ]
A
This works for base 6 speaker stereo If you have Harman Kardan or Alpine it may not work.
[ SCOTT  Apr 01, 2020 ]
A
If it has the base 6 speaker system, then yes.
[ Troy  Apr 01, 2020 ]
Q
It looks as if this module DOES work with the H/K system, but not the Alpine system. Is this correct? I have a bypass from my 2019 ram with the base system, and upgraded to a 2021 ram with the H/K. Will it work the same?
[ Nicholas  Apr 23, 2021 ]
1 answer
A
This unit only works in the Ram Pickups that come without an external amp and the HK system has an external amp. At this time, we do not have an ANC bypass harness for it. That may change in the future and I recommend contacting an advisor by calling 1-800-324-9695 to check
[ Paul  May 02, 2021 ]  Staff
Q
I have a 2019 ram 2500 big horn with the base six speaker system. The volume does not get louder after 22 and seems to go in and out. Will this rectify my problem? Also, where would this need to be plugged in if I don't have an amp?
[ john  Dec 29, 2020 ]
8 answers
A
This cable is designed to bypass the noise cancelation if you are adding an amplifier or a subwoofer to your truck.
[ PHILIP  Dec 30, 2020 ]
A
This plugs in under the drivers seat, it is a bypass for the anc module. But will not fix your issue... the problem is an internal software issue... supposedly Chrysler is working on an update to fix this issue, supposed to be out in the first quarter of 2021.
[ JOE  Dec 29, 2020 ]
A
For reference I have the 8.4inch non Navi head unit in a 2019 5th gen ram with the base six speaker system. I do not believe this will fix that problem. This will only bypass some of the fake engine sounds that's pumped in and it will block the ANC from not allowing you fully utilize aftermarket subwoofers. My volume does get louder after 22 before and after installing this. I had an issue where my speakers would intermittently cut out when played at higher volumes but I suspected that to happen because I had the stock 2 ohm speakers mixed with 4 ohm aftermarket speakers. When I upgraded all 6 speakers to 4ohm speakers that particular issue went away. Finally, you will install this under your driver seat, which is where the ANC module is installed. You will unplug the connections from the ANC module and connect it directly to the iDatalink bCH3 instead. This will bypass the ANC module entirely. I purchased this with the intent to upgrade to an aftermarket amplifier in the future.
[ MITCHELL  Dec 29, 2020 ]
A
While I did not have an issue with the volume topping out at 22, I did have the issue with the volume going in and out. Purchase and installing this item addressed the issue. Note that it is located under the steering column to the left-hand side, not under the driver seat as others have mentioned.
[ David  Dec 29, 2020 ]
A
Couple questions to answer this. 1. What engine? 2. Do you see the ANC unit under the drivers seat? If you do, then getting this harness will eliminate that box. Volume issues are 2 fold. 1. ANC and 2. Issues with USB over music. You'll find that listing to your truck, with NO usb devices or phones plugged in will be louder then if they were plugged in. Try listening to music from your phone.. First through USB... Then try Bluetooth (remove all cables) make sure your volume to your phone is at its max! You will notice Bluetooth is louder, and more clear when not using a USB cable. Removing ANC will help this a little bit. Next step, go to fader options.. And move the fader to the front 2-3 clicks. You'll also notice it gets louder and bass hits better! Factory deck can't push all the speakers as well as they should. So, I move the fader towards the front to allow the amp to power those better. Again, you'll notice it goes louder. In the end, all we have are work-arounds for better sound... Sadly no fix, other then adding amps. Again, I did my tricks with the radios settings.. And removed my ANC.. Added a mono block... purchased the subwoofer from Mopar direct for the HK radio system... I added this factory sub, with a kicker amp to fill the bottom end that's missing. Doing this saved me space, and gave me a full balanced sound. If you need more info, let me know.
[ DAVE  Dec 29, 2020 ]
A
There is also a update from dealership for the anc.
[ VINCENT  Dec 29, 2020 ]
A
Yes it will my speakers would cut out and come back on. This eliminates the noise control that cuts speakers off when loud.
[ VINCENT  Dec 29, 2020 ]
A
this replaces the box under the drivers seat. This may help you with your fading in and out.
[ DUANE  Dec 29, 2020 ]
Q
is there a wiring diagram for the iDatalink bCH3? like to tap into the wires here so i don't mess up my factory wiring. Adding a powered sub and need to tap into speaker wires.
[ paul  Dec 06, 2020 ]
2 answers
A
As mentioned... not only does this harness have the proper aftermarket color scheme for the wires, but they are in proper place. Tap off the front! White and gray wires! You don't want to tap off the rear. Many reasons.
[ DAVE  Dec 29, 2020 ]
A
Yes it does have a list of which color wires go to which speaker. Also has the pin diagram.
[ JACOB  Dec 08, 2020 ]
Q
After installing an amp and replacing the factory speakers (because the factory speakers are terrible) in my 2020 Ram Lonestar. I have this droning noise now, does this product REALLY bypass that droning noise? Or does it just makes it quieter?
[ Brian  Sep 01, 2020 ]
2 answers
A
Yes sir it actually bypasses the droning, I added a sub and the drone coming through it was horrible. This made it go completely away and I don't notice any difference when using my speakers to talk on the phone. Not to mention it takes longer to move your driver side seat forward than it does to install this. Hope this helps
[ RICARDO  Sep 04, 2020 ]
A
Assuming you have the base six speaker audio system this harness bypasses the ANC (active noise cancellation system). as you have added an amp and upgraded the speakers this has drastically improved the sound level inside your vehicle therefore I'm inclined to believe that bypassing the ANC module will rectify the droning due to the ANC module attempting to cancel out high noise levels now present in your cab from upgrades.
[ ALFRED  Sep 04, 2020 ]
Q
Do I connect this adaptor to the amp under the seat in my 2019 Ram big horn?
[ Jordan B  Aug 11, 2020 ]
5 answers
A
Under the drivers seat is the active noise control module it's not an amp. Yes this plugs in there. It is very easy to connect and disconnect. It helps with audio sound. It's still not perfect. From my half vast research there is another module for the ANS under the hood somewhere that I haven't figured out where it is and wether or not it can be disconnected. Sure would have been nice if Ram would have put an on off switch on the ANS.
[ Thomas  Aug 12, 2020 ]
A
Unhook the wires than Connect them together with the link if you need speaker hook up for an amplifier Those are speaker wires
[ CHARLES  Aug 11, 2020 ]
A
It does not go to the amp You disconnect the wire harness's from the amp and that adapter connects the wires together It is designed to bypass the amp or active noise control This does not cancel out the ANC all the way You still have to disconnect the mics in the headrest
[ Michael  Aug 11, 2020 ]
A
Yes is real easy
[ ALFONSO  Aug 11, 2020 ]
A
No. The ANC gets unplugged and the two harnesses that you unplug get connected. You can remove the ANC module entirely if you choose.
[ Troy  Aug 11, 2020 ]
Q
Does this product work for a 2020 Ram 1500 Laramie Edition?
[ Chris  Apr 01, 2020 ]
3 answers
A
If you have ANC with HK or Alpine, YES. ANC is a separate unit under the drivers seat.
[ DAVE  Dec 29, 2020 ]
A
This works for base 6 speaker stereo If you have Harman Kardan or Alpine it may not work.
[ SCOTT  Apr 01, 2020 ]
A
If it has the base 6 speaker system, then yes.
[ Troy  Apr 01, 2020 ]
SHOW MORESHOW LESS

Loading articles...

TOP