About the iDatalink Connec ADS-HRN(SR)-CHR02 Interface Harness
iDatalink meets Chrysler
iDatalink meets Chrysler
iDatalink's ADS-HRN(SR)-CHR02 inteface harness allows you to connect a new car stereo in select 2004-10 Chrysler, Dodge, and Jeep vehicles, working in conjunction with iDatalink's Maestro ADS-MRR module. Once connected, you'll retain the use of your steering wheel audio controls and your factory amp in these vehicles.
The package includes connectors that plug in between the Maestro module, your Chrysler radio's wiring plugs, and your new car stereo. You'll have to solder or splice together this harness's power/ground, illumination, speaker, and navigation output wires to the corresponding wires on your aftermarket receiver's wiring harness.
With select radios from Kenwood, Alpine, and Pioneer, you'll also be able to retain the use of your Uconnect system, including voice command. For more info, check Details for the iDatalink ADS-MRR module.
Installation note: The ADS-HRN(SR)-CHR02 harness must be used with the iDatalink Maestro ADS-MRR module to connect a new car stereo to your Chrysler-made vehicle.
- works with Maestro ADS-MRR module to allow installation of new receiver in select Chrysler vehicles
- retains the use of your steering wheel audio controls and factory amp in select vehicles
- retains Uconnect with voice command with select Kenwood, Alpine, and Pioneer touchscreen receivers
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # ADS-HRN(SR)-CHR02
What's in the box:
- Chrysler/Dodge/Jeep installation harness (for use with Maestro RR interface)
iDatalink Connec ADS-HRN(SR)-CHR02 Interface Harness reviews
Thanks for submitting your review
More details on the iDatalink Connec ADS-HRN(SR)-CHR02 Interface Harness
Overview: The iDatalink Maestro ADS-HRN(SR)-CHR02 installation harness greatly simplifies the installation of the Maestro RR Car Radio Replacement Interface module (794ADSMRR, sold separately) in select Chrysler, Dodge, and Jeep vehicles.
Vehicle Compatibility Chart: The iDatalink Maestro ADS-HRN(SR)-CHR02 installation harness is compatible with the following 2004-up Chrysler/Dodge/Jeep vehicles (as of 4/4/2014):
Note: Please consult Crutchfield's Outfit My Car to see if your vehicle is compatible and what additional accessories will be needed.
Connections: The iDatalink Maestro ADS-HRN(SR)-CHR02 installation harness contains two Molex connectors which plug into your factory radio harness. On the other end of the harness are four multi-pin connectors which plug into the Maestro RR Car Radio Replacement Interface module (794ADSMRR, sold separately). In addition, you will need to hardwire the power/ground, illumination, speaker, and navigation output leads of the ADS-HRN(SR)-CHR02 harness to your aftermarket head unit's wiring harness.
Note: When using the ADS-HRN(SR)-CHR02 installation harness, you will not use the additional harnesses that are included with the Maestro RR Car Radio Replacement Interface module (794ADSMRR, sold separately).
Optional RSE Harness: If your vehicle is equipped with a rear seat entertainment system, then you will also need the iDatalink ADS-HRN(AV)-CHR02 installation harness (794HRNAVC1, sold separately) to retain this feature.
Wire Code Chart:
Wire Color Function Red +12 Volt Accessory Yellow +12 Volt Constant Black Ground Blue/White Amp Turn-On Orange Illumination White Left Front Speaker + White/Black Left Front Speaker - Gray Right Front Speaker + Gray/Black Right Front Speaker - Green Left Rear Speaker + Green/Black Left Rear Speaker - Violet Right Rear Speaker + Violet/Black Right Rear Speaker - Brown Telephone Mute Pink VSS Violet/White Reverse Gear Light Green Parking Brake Yellow/black Foot Brake