Contact us
Close contact box

iDatalink Connec ADS-HRN(SX)-ALL01 Cable

Connects the Maestro RR module to select Kenwood receivers installed in SYNC-equipped vehicles

Item # 794HRNSXA1

iDatalink's Maestro ADS-HRN(SX)-ALL01 cable connects the Maestro RR module to select Kenwood receivers,...

iDatalink's Maestro ADS-HRN(SX)-ALL01 cable connects the Maestro RR module to select Kenwood receivers,...

Need help?
Contact our Virginia-based experts.
Discontinued item

Item # 794HRNSXA1

About the iDatalink Connec ADS-HRN(SX)-ALL01 Cable

Keep your SYNC system with a new Kenwood GPS receiver

iDatalink's Maestro ADS-HRN(SX)-ALL01 cable connects the Maestro RR module to select Kenwood receivers, allowing the Kenwood receiver to perform all the functions of the factory SYNC system in select Ford, Lincoln, Mercury, and Mazda vehicles. It works with these Kenwood models: DDX370, DNX5190, DNX6190HD, DNX6990HD, DNX7190HD, and DNX9990HD.

Keep your SYNC system with a new Kenwood GPS receiver

iDatalink's Maestro ADS-HRN(SX)-ALL01 cable connects the Maestro RR module to select Kenwood receivers, allowing the Kenwood receiver to perform all the functions of the factory SYNC system in select Ford, Lincoln, Mercury, and Mazda vehicles. It works with these Kenwood models: DDX370, DNX5190, DNX6190HD, DNX6990HD, DNX7190HD, and DNX9990HD.

Here's how it works

First, you connect the Maestro module to your PC using the included USB cable, visit www.idatalink.com/maestro, and follow the instructions. Once the unit has been "flashed," it's ready to go. Next, you'll either solder or crimp the iDatalink Ford harness (ADS-HRN(SR)-FOR01) to your Kenwood receiver's wiring, just like you would with any Crutchfield wiring harness or wiring adapter. Finally, you use this Kenwood cable to finish connecting the Maestro RR module to the Kenwood receiver.

You'll enjoy the outstanding performance of your Kenwood DVD or GPS receiver, plus seamless touchscreen control over your SYNC system, including the factory Bluetooth, satellite radio (in most vehicles), steering wheel audio controls, and other great features. SYNC will still talk to you, and all your factory voice controls will work as they did before.

Retain steering wheel controls, too

The RR module also allows you to use your Ford's steering wheel audio controls with the Kenwood receiver. Using the intuitive web programming interface, each factory button can be assigned a specific radio function. Better yet, you can also assign a secondary "press and hold" radio function to each factory button, effectively doubling what can be controlled.

Installation Notes: If your Ford factory radio also houses the satellite radio tuner, you will not be able to retain SiriusXM reception once this harness is installed. Check iDatalink's flash demo to find out if you'll retain your factory satellite radio tuner, and to see which other factory features will still be available.

READ LESS

What's in the box:

  • 10-pin to 3.5m connector/4-pin connector cable (for Maestro RR + Kenwood DNX)
MFR #ADS-HRN(SX)-ALL01

Customer reviews

Loading reviews...

iDatalink Connec ADS-HRN(SX)-ALL01 Cable reviews

Average review:

5 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the iDatalink Connec ADS-HRN(SX)-ALL01 Cable

Stacey B.

Product Research

Features

Compatibility: The iDatalink Maestro ADS-HRN(SX)-ALL01 cable connects the serial communications port and audio input jack on the Maestro RR Car Radio Replacement Interface (794ADSMRR, sold separately) to the SXi port on compatible 2012 Kenwood DNX series navigation head units or  select 2013 Kenwood DDX series multimedia head units. One end of the cable features a 4-pin connector and 3.5mm connector to connect to the Maestro RR interface module, while the other end of the cable is terminated with a 10-pin DIN connector to plug into your Kenwood DNX head unit. The ADS-HRN(SX)-ALL01 cable is compatible with the following Kenwood DNX & DDX radios (as of 3/12/2014).

  • 2012 DNX-series Navigation Receivers:
    • DNX5060EX
    • DNX5190
    • DNX6190
    • DNX6990
    • DNX7190
    • DNX9990HD
  • 2013 DDX-series DVD Receivers
    • DDX370

Note: The iDatalink Maestro ADS-HRN(SX)-ALL01 cable requires the Maestro RR Car Radio Replacement Interface (794ADSMRR, sold separately).

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
I needed it for the radio I ordered from here [ DEATRICK  Mar 11, 2017 ]
A
Needed for install. have used product before. helps with integration [ JOHN  Feb 15, 2017 ]
A
I heard great things about idatalink products. [ Kevin  Oct 18, 2016 ]
A
I wanted to see vehicle data and have climate control on hu. [ travis  Mar 11, 2016 ]

Loading articles...

TOP