iDatalink HRN-RR-CH3 Factory Integration Adapter

Features

Installation Harness: The iDatalink Maestro HRN-RR-CH3 installation harness greatly simplifies the installation of the Maestro RR or RR2 Car Radio Replacement Interface module (sold separately) in select Chrysler, Dodge, Jeep, Fiat, and Ram vehicles with a 52-pin radio plug when replacing your factory radio with an iDatalink Serial Port compatible head unit from Kenwood, JVC, Alpine, Sony, or Pioneer.

• Vehicle Compatibility: Click here for a list of compatible Chrysler, Dodge, Jeep, Fiat, and Ram vehicles.
• Radio Compatibility: Click here for a list of fully compatible aftermarket head units with an iDatalink Serial Port.

Notes: The iDatalink Maestro HRN-RR-CH3 installation harness requires the purchase of the iDatalink Maestro RR or RR2 (sold separately). This installation harness will not work with aftermarket head units that do not feature an iDatalink Serial Port.

Flashing Module via Weblink Desktop: The iDatalink Maestro RR (ADS-MRR) will need to be loaded with correct firmware before installation. The included USB cable plugs into your computer and allows you to "flash" the Maestro RR or RR2 with the appropriate firmware to prepare it for installation. Simply download Weblink Desktop (for Windows and Mac) onto your computer to access the appropriate firmware. System requirements include -

• Windows PC (10/8.1/8/7/Vista/XP/2000) or Mac OS X (Mojave [10.14], HighSierra [10.13], Sierra [10.12], El-Capitan [10.11])
• Available USB port (version 2.0 or 3.0)
• 4GB RAM or more
• 200MB available space on HDD
• Internet connection

Retained Features: The following factory features (if applicable) are retained when replacing your factory radio with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Alpine, Sony, or Pioneer using the Maestro RR Car Radio Replacement Interface module and HRN-RR-CH3 installation harness.

• Steering Wheel Controls
• Analog or Digital Amp with Turn On, Fader, Gain , & Speed Compensated Volume
• RAP (Retained Accessory Power)
• Vehicle Settings within compatible aftermarket radio
• Factory Cluster with song/artist/album information and clock display
• Factory knobs and buttons will continue to operate aftermarket radio
• Climate control and display
• RSE (Rear Seat Entertainment)
• Front & rear parking sensor display & chime

Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood. JVC, Pioneer, Sony, or Alpine using the Maestro RR or RR2 Car Radio Replacement Interface module and HRN-RR-CH3 installation harness.

• Performances Gauges
• Vehicle Information (TPMS, Doors, Check Engine)
• On-Screen Parking Sensor Display

Connections: The iDatalink Maestro HRN-RR-CH3 installation harness contains a Molex connector which plug into your factory radio harness. On the other end of the harness are four multi-pin connectors which plug into the Maestro RR or RR2 Car Radio Replacement Interface module. In addition, you will need to hardwire the power/ground, illumination, speaker, and navigation output leads of the HRN-RR-CH3 harness to your aftermarket head unit's wiring harness.

Note: When using the HRN-RR-CH3 installation harness, you will not use the additional harnesses that are included with the Maestro RR or RR2 Car Radio Replacement Interface module.