Contact us
Close contact box

iDatalink Connec HRN-RR-FO2 Factory Integration Adapter

Retain the factory steering wheel audio controls and factory amp on select 2011-up Ford vehicles

Item # 794HRRF02

Working in conjunction with iDatalink's Maestro ADS-MRR module, iDatalink's HRN-RR-FO2 wiring adapter allows you to...

Read more from Crutchfield writer, Bob B.

Find what Fits your car

In Stock
$34.99

Other options

About the iDatalink Connec HRN-RR-FO2 Factory Integration Adapter

Retain your Ford's features

Working in conjunction with iDatalink's Maestro ADS-MRR module, iDatalink's HRN-RR-FO2 wiring adapter allows you to connect a new car stereo in select 2011-up Ford vehicles with the 4.3" My Ford radio, working in conjunction with iDatalink's Maestro ADS-MRR module. Once connected, you'll retain the use of your steering wheel audio controls, plus gain the ability to program two functions for each button. The harness also turns on your factory amp (if present) and provides the outputs necessary to install a radio with navigation functions, including accessory power, illumination, parking brake, VSS, and foot brake outputs.

Retain your Ford's features

Working in conjunction with iDatalink's Maestro ADS-MRR module, iDatalink's HRN-RR-FO2 wiring adapter allows you to connect a new car stereo in select 2011-up Ford vehicles with the 4.3" My Ford radio, working in conjunction with iDatalink's Maestro ADS-MRR module. Once connected, you'll retain the use of your steering wheel audio controls, plus gain the ability to program two functions for each button. The harness also turns on your factory amp (if present) and provides the outputs necessary to install a radio with navigation functions, including accessory power, illumination, parking brake, VSS, and foot brake outputs.

Extra functionality

With a compatible iDatalink-ready car stereo, you'll also be able to retain the use of most SYNC features, including the Media Player, hands-free calling, voice commands, and display of song information on the 4.3" screen. With these receivers, you'll also be able to set up gauges and other info that display on your screen, showing tire pressure, oil pressure, door status, engine codes, and visual parking assist. Warranty: 1 year.

READ LESS

Highlights:

  • allows installation of a new receiver in select Ford models (also requires the Maestro ADS-MRR module)
  • retains steering wheel controls and factory amp in select vehicles
  • retains most SYNC features with select Alpine, JVC, Kenwood and Pioneer receivers
  • displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # HRN-RR-FO2
KEEP READINGREAD LESS

What's in the box:

  • 25" Ford installation harness (for use with Maestro RR interface)
  • 20" Back up camera adapter harness

Customer reviews

Loading reviews...

iDatalink Connec HRN-RR-FO2 Factory Integration Adapter Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the iDatalink Connec HRN-RR-FO2 Factory Integration Adapter

Product Research

Features

"My Ford" Harness: The iDatalink Maestro HRN-RR-F02 installation harness greatly simplifies the installation of the Maestro RR Car Radio Replacement Interface module (794ADSMRR, sold separately) in select Ford vehicles with the "My Ford Radio" and 4.3" screen when replacing your factory radio with an iDatalink Serial Port compatible head unit or other aftermarket head unit from Kenwood, JVC, Alpine or Pioneer (click here for a list of fully compatible radios); or other aftermarket head unit.

Note: The iDatalink Maestro HRN-RR-F02 installation harness requires the purchase of the iDatalink Maestro RR (794ADSMRR).

Vehicle Compatibility Chart: Click here for a list of compatible Ford vehicles with the "My Ford Radio" and 4.3" screen. Or, click here to find out what works with your particular vehicle.

Flashing the Module: The iDatalink Maestro RR (ADS-MRR) will need to be plugged into your Windows PC and loaded with the correct firmware for your vehicle before installation. Visit iDatalink's Weblink site, and follow the instructions. System Requirements for Weblink 6.3 include:

  • Windows 2000 (SP4), XP (SP2), Vista, 7, 8, 8.1, or 10
  • Administrative rights on your PC
  • Internet Explorer 7.0 or greater (excluding 64-bit version)
  • Available USB port
Note: iDatalink Maestro RR is not compatible with a Mac.

Retained Features: The following factory features (if applicable) are retained when replacing your factory radio with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Alpine, or Pioneer using the Maestro RR Car Radio Replacement Interface module and HRN-RR-F02 installation harness.

  • Steering Wheel Controls
  • Sync with Media Player (USB/Aux) & Bluetooth (Phone/Music)
  • Amplifier Turn-On
  • Backup Camera (requires head unit with backup camera input)

Note: When installing an aftermarket head unit without the iDatalink Serial Port, only steering wheel control and amplifier turn-on are retained.

Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Pioneer, or Alpine using the Maestro RR Car Radio Replacement Interface module and HRN-RR-F02 installation harness.

  • Performances Gauges
  • Vehicle Information (TPMS, Doors, Check Engine)
  • On-Screen Parking Sensor Display

Connections: The iDatalink Maestro HRN-RR-F02 installation harness contains two Molex connectors which plug into your Ford's factory radio harness. On the other end of the harness are four multi-pin connectors which plug into the Maestro RR Car Radio Replacement Interface module (794ADSMRR, sold separately). There are also front and rear RCA's for integrating with premium amplified systems, and one pair of stereo Auxiliary RCA connectors for retaining the stock AUX jack. In addition, you will need to hardwire the power/ground, illumination, speaker, and navigation output leads of the HRN-RR-F02 harness to your aftermarket head unit's wiring harness.

Note: When using the HRN-RR-F02 installation harness, you will not use the additional harnesses that are included with the Maestro RR Car Radio Replacement Interface module (794ADSMRR, sold separately).

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
I need it to work with my Ford Edge. [ Ronald  Nov 24, 2018 ]
A
It was the suggested add-on for the radio I was buying [ Thaddeus  Nov 09, 2018 ]
A
Recommended. [ R  Oct 21, 2018 ]
A
Part of Crutchfield installation package. [ Kevin  Oct 16, 2018 ]
A
Crutchfield assistant recommended [ Michael  Sep 19, 2018 ]
A
Easier install [ Ken  Jul 06, 2018 ]
A
Wanted to still be able to use steering wheel controls do went with this recommended kit. [ Nicholas L.  Jul 05, 2018 ]
A
Adviser suggested it. [ Lance  Jun 02, 2018 ]
A
I wanted to retain the steering wheel functions and sync system in my Focus ST. This kit allows you to customize the buttons and keep my stock Sync system that I am used to. [ That Guy  May 27, 2018 ]
A
I chose it because it looks like it's plug and play. Also retains the factory steering wheel controls. [ Brandt  May 19, 2018 ]
A
so I dont have to cut my factory plugs off to install radio [ Lee  Apr 08, 2018 ]
A
Been waiting many months for this unit to become available for my vehicle. Metra and PAC units are garbage. This unit retains a lot of my SYNC features. [ Martin  Dec 19, 2017 ]
A
Need it for an installation [ John  Oct 10, 2017 ]
A
NECESSARY PURCHASE FOR MY INSTALL [ PAUL  Jun 27, 2017 ]
A
The one that comes with Maestro the K-150 kit is an older version harness and does not have the right connectors to work with MyFord 4.2" LCD radio. [ Mike  Mar 31, 2017 ]
SHOW MORESHOW LESS

1 question already asked

Q
This requires the Maestro RR, correct? And if used in conjunction, should not require any splicing? This is simply meant to be a plug and play adapter for the RR module, not as a standalone harness?
[ Logan  Aug 17, 2018 ]
3 answers
A
I needed to solder a couple wires to my deck leads. When i installed the RR module i also installed a dash kit also in my F-150. There was a little bit of splicing but the instructions make it simple.
[ Neil  Aug 18, 2018 ]
A
It plugged into the fine but not the radio, that required quite a few wiring connections.
[ Ronald  Aug 17, 2018 ]
A
Yes, it does require the iData Link Maestro and is not a stand alone harness. It is plug and ply and does not require splicing.
[ Tom  Aug 17, 2018 ]

Loading articles...

TOP