iDatalink HRN-RR-FI1 Factory Integration Adapter

Feature

Fiat Installation Harness: The iDatalink Maestro HRN-RR-FI1 installation harness greatly simplifies the installation of the Maestro RR or RR2 Car Radio Replacement Interface module (sold separately) in select Fiat vehicles when replacing your factory radio with an iDatalink Serial Port compatible head unit from Kenwood, JVC, Alpine, Sony, and Pioneer; or other brand of aftermarket head unit.

• Vehicle Compatibility: Click here for a list of compatible Fiat vehicles.
• Radio Compatibility: Click here for a list of fully compatible aftermarket head units with an iDatalink Serial Port.

Notes: The iDatalink Maestro HRN-RR-FI1 installation harness requires the purchase of the iDatalink Maestro RR or RR2 (sold separately).

Flashing Module via Weblink Desktop: The iDatalink Maestro RR or RR2 will need to be loaded with correct firmware before installation. The included USB cable plugs into your computer and allows you to "flash" the Maestro RR with the appropriate firmware to prepare it for installation. Simply download Weblink Desktop (for Windows and Mac) onto your computer to access the appropriate firmware. System requirements include -

• Windows PC (10/8.1/8/7/Vista/XP/2000) or Mac OS X (Mojave [10.14], HighSierra [10.13], Sierra [10.12], El-Capitan [10.11])
• Available USB port (version 2.0 or 3.0)
• 4GB RAM or more
• 200MB available space on HDD
• Internet connection

Retained Features: The following factory features (if applicable) are retained when replacing your factory radio with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Alpine, Sony, or Pioneer using the Maestro RR or RR2 Car Radio Replacement Interface module and HRN-RR-FI1 installation harness.

• Factory Amplifier Turn-On (also compatible in vehicles without factory amplifier)
• Bluetooth Phone
• USB Media Player
• Aux Input
• Steering Wheel Controls

Note: When installing an aftermarket head unit without the iDatalink Serial Port, only steering wheel control & amplifier turn-on are retained.

Navigation Outputs: The iDatalink Maestro HRN-RR-FI1 installation harness provides the following outputs for installing an aftermarket navigation receiver - Parking Brake, Foot Brake, & Reverse Light.

Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Pioneer, Sony, or Alpine using the Maestro RR or RR2 Car Radio Replacement Interface module and HRN-RR-FI1 harness.

• User Selectable Gauges
• Vehicle Information (Door Open, Check Engine, Tire Pressure, & Battery Voltage)

Connections: The iDatalink Maestro HRN-RR-FI1 installation harness contains two large Molex connectors which plug into your factory radio harness. On the other end of the harness are four multi-pin connectors which plug into the Maestro RR or RR2 Car Radio Replacement Interface module. In addition, you will need to hardwire the power/ground, illumination, speaker, and navigation output leads of the HRN-RR-F1I harness to your aftermarket head unit's wiring harness.

Notes:

• When using the HRN-RR-FI1 installation harness, you will not use the additional harnesses that are included with the Maestro RR or RR2 Car Radio Replacement Interface module.
•  If the vehicle is equipped with a factory amplifier, then you will connect the RCA jacks of the harness to the pre-outs on back of your aftermarket receiver. If there is no factory amplifier present, then you will need to cut off the RCA connectors and hardwire these leads to the speaker outputs on your aftermarket receiver.