About the Yamaha AG06
Easy recording for gamers, podcasters, and mobile musicians
Easy recording for gamers, podcasters, and mobile musicians
Yamaha designed their new AG06 computer interface/mixer for folks who are active in the social media side of audio production. Whether you publish a weekly podcast, teach or take online music lessons, or upload videos of your own gaming prowess on sites like Twitch, the AG06 may be just what you need to take your hobby, passion, or pastime to the next level. The key is its convenient loopback feature, which lets you route audio tracks from your computer back to the mixer via the USB port and lay your own voice or instruments on top. Then you can easily set your levels and send a mix to your Internet streaming software for recording or broadcasting on the web.
Serious sound quality under the hood
The six-channel AG06 has inputs for two microphones. Input 1 accommodates a condenser, thanks to onboard phantom power. Yamaha's high-quality D-PRE microphone preamp design and high-res 24-bit/192kHz recording mean you'll capture warm, detailed sound. You also get easy-to-use one-touch effects. For Input 1 you can select a "Comp/EQ" (compression and equalization) setting, as well as adding some ambient reverb using the "Effect" button. Input 2, which doubles as a high-Z input for guitars and basses, features an amp simulation effect plus reverb. Download Yamaha's AG DSP Controller (now available for Windows® and Mac®), and you can customize the AG06's onboard effects for a wider range of options.
Record on the go with your iPad (not included).
Make music with your computer or iPad
The AG06 is compatible with lots of different recording software, for your Mac® or PC as well as iOS® apps on the iPad. Not sure which one to use? Try Cubase AI, developed by Steinberg and included with this interface. It gives you everything you need to start producing songs. There's also an iPad version, Cubasis, available for sale at the iTunes® store. This USB-powered interface doesn't need an external power supply when used with a computer. But when you're recording on your iPad, there's a power port on the back for connecting an optional AC or USB power adapter, or even a standard mobile battery (sold separately).
- 6-channel mixer/recording interface for Mac®, PC, or iPad®
- 2-input/2-output USB 2.0 recording interface
- loopback feature routes playback tracks from your computer to the mixer and combines your inputs for recording to Internet streaming software
- Yamaha D-PRE discrete Class A mic preamp design offers warm, clean sound even at high input levels
- 2 microphone inputs (48V phantom power on input 1)
- comes bundled with CUBASE AI music production software (download version) for Mac and Windows
- optional Cubasis recording app for iPad available for purchase at the iTunes Store
- built-in 1-touch DSP effects include Comp/EQ (compression and equalization), amp simulation, and reverb
- durable, compact metal chassis
- two 1/4" TRS/XLR combo inputs (main mic/line in)
- input 2 doubles as "high-Z" instrument input for electric guitars and basses
- 2 pairs left and right stereo line inputs (1/4" and RCA)
- 3.5mm stereo aux input
- stereo RCA and 1/4" monitor outputs
- full-size (1/4") headphone output jack
- USB 2.0 port
- jack for optional footswitch (toggles effects on/off)
- 24-bit/192kHz high-res analog-to-digital and digital-to-analog conversion
- compatible with 2nd generation and later iPads (requires Lightning™ to USB adapter or Apple Camera Connection Kit)
- system requirements: USB 2.0 port; Windows 7 (SP1), Windows 8, Windows 8.1 or Mac OS X 10.7.5 or later; Intel or AMD dual core CPU, 2GB RAM, 4GB of free hard drive space, CD-ROM drive or Internet connection for software installation; iPad 2 or higher with iOS 6 or higher
- peak indicators
- powered by your computer via USB
- rear port for powering mixer via USB adapter or mobile battery (required for use with iPad)
- 6-1/8"W x 2-1/2"H x 8"D
- weight: 2.2 lbs.
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # AG06
What's in the box:
- AG06 6-channel mixing console
- 59" USB cable (Type A USB on one end and Type B USB on other end)
- Owner's Manual (English)
- 8 Owner's Manuals (separate copies in other languages)
- Technical Specifications
- Cubase AI download information
- Software note
- Important Notice (for European customers only)
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
More details on the Yamaha AG06
Overview: The Yamaha AG06 is a multi-purpose, high-resolution 6-channel mixing console and USB audio interface. It has a mono Mic/Line input, a mono Mic/Guitar input, and two stereo Line inputs, plus left/right mains out, left/right Monitor out and headphone out. In addition, there are two USB in/outs, one for PC (Type B) and the other for tablet (MicroUSB), for recording or playing back your own tracks at up to 24-bit/192kHz resolution. The AG06 has a durable, compact metal chassis with a white finish.
Possible Uses: The Yamaha AG06 can be used in a wide variety of ways, including webcasting, podcasting, gaming, musicians and music producers, and education.
Preamp: The AG06 has studio quality D-PRE microphone preamps, the same Discrete Class-A Mic Preamp developed by Yamaha for their high-end recording consoles. The D-PRE preamps have a very wide frequency range which allows them to handle signal from virtually any audio source.
Phantom Power: The mic inputs feature +48V DC phantom power, giving you the option to use professional condenser microphones.
Comp/EQ: The AG06's Channel 1 is equipped with a 1-Touch Comp/EQ (compressor/equalizer), which can easily add clarity and focus to your sound at the touch of a button. Using Yamaha's state-of-the-art signal processing technology, the Comp/EQ lets you reduce unwanted low-frequency noise and variations in vocal level.
Amplifier Simulator: Channel 2's guitar input features an Amplifier Simulator which reproduces the sound of using an actual amplifier. When an electric guitar is directly connected, the AMP SIM function can reproduce amp "distortion."
Optional Mic Stand Mount: The mixer can be mounted onto a microphone stand by using the optional Yamaha BMS-10A Microphone Stand Adapter. Two threaded screw holes on the bottom will accommodate the stand adapter.
Channel 1 Mic/Line Input: You can connect a microphone, instrument, or other audio device to Channel 1. This input has an XLR-1/4" combo jack, allowing you to use an XLR or phone plug.
Channel 2 Guitar/Mic Input: The AG06 allows you to plug in a microphone or guitar into Channel 2. Like Channel 1, the Channel 2 features an XLR-1/4" combo jack. When instruments with high output impedance (High-Z) are plugged into the jack, the Guitar switch should be pressed in. This input does not supply Phantom Power.
Channels 3 & 4: You can connect line-level devices, such as an electric keyboard or an audio device. These inputs feature two 1/4" phone jacks, marked L/Mono and R. Devices with mono outputs should be connected to the L/Mono input, which will be output through both the left and right channels.
Channels 5 & 6: Channels 5 & 6, like 3 & 4, are for connecting line-level devices and instruments. These inputs feature RCA jacks, marked L/Mono and R. Devices with mono outputs should be connected to the L/Mono input, which will be output through both the left and right channels.
- Channels 1 & 2: Channels 1 and 2 are controlled by rotary level controls. Rotary Gain knobs can determine the basic volume for these. If the Peak LED is constantly lit, the input gain is too high and should be adjusted. Both channels have switchable 26dB Pads to attenuate the input, if needed. Channel 1 also has a +48V Phantom Power switch in case you're using a condenser microphone.
- Channels 3/4 and 5/6: These two channel pairs are controlled by rotary level controls. Gain switches determine the basic volume for each channel 3/4 and 5/6.
Auxiliary Input: This 3.5mm auxiliary input jack lets you connect a smartphone or other device to the mixer. The controls on the device must be used to adjust volume.
To PC: A 3-way switch lets you determine what sounds are sent to the computer:
- Dry Ch 1-2G: Audio from Channels 1 and 2G is sent directly into the computer, where it can be recorded separately, as with an audio interface.
- Input Mix: The sound input into the mixer is mixed in stereo and sent into the computer. Sound input from the computer into the mixer is not sent back to the computer.
- Loopback: The Loopback function consolidates all input channels and playback tracks from the computer, and routes the mix back to your computer. You can adjust the input volume of the sound from the computer by a separate rotary knob. This is extremely helpful for webcasting or live recording.
Stereo Outs: The Yamaha AG06 outputs the mixed signal in stereo. The 1/4" Stereo Outputs are used to connect the mixer to another mixer or recorder. The signal output is not affected by the "To PC" slide switch or the Speakers knob.
Monitor Outputs: The mixer is equipped with stereo monitor outputs with phone (1/4") jacks. These are provided to connect the mixer to powered monitor speakers. There is also a 1/4" headphone jack for connecting a set of headphones. If your headphones have a 3.5mm plug, you can use the Headset output jack.
Foot Switch: A 1/4" phone jack is provided for connecting to a separately-sold foot switch, such as the Yamaha FC5. When the Effect button is turned on, the effected sound can be muted with a footswitch. The LED next to the Effect button flashes if the effected sound is muted.
Headset: Two 3.5mm jacks let you connect the microphone plug of a headset into the mixer. When a microphone (usually color-coded pink) is plugged into the headset microphone jack, the audio is sent to Channel 1, and any microphone or instrument connected to the Mic/Line input on Channel 1 is cut off. The headphone plug of the headset (usually light green in color) plugs into the headphone jack. This headphone jack receives the same sound as the 1/4" monitor headphone jack.
Monitor Mute: When the Monitor Mute switch is on (pressed in), the audio input to channels 1 and 2G is not sent to the Monitor Outputs (RCA or 1/4") or Headphone monitor jack, and direct monitoring is turned off. Audio coming from other sources (PC, for example) can still be heard through the monitor and headphone outputs, and you can adjust the levels independently.
USB 2.0 Port: For connecting the mixer to a computer, the AG06 has a Type B USB 2.0 terminal. The computer supplies power to the mixer and audio data can be sent between the mixer and computer. If a USB driver is required, it can be downloaded from the Yamaha website.
5V DC Terminal: You can connect a commercially-available USB power adapter or USB mobile battery via the Micro USB port. This terminal is also used for connecting the mixer to an iPad or other tablet that cannot supply power to the mixer.
Cubase AI: The Yamaha AG06 includes Cubase AI 8 Music Production Software. This digital audio workstation (DAW) is available via free download, and provides the basic tools for recording, editing, and mixing.
iPad Compatibility: The AG06 is compatible with Apple's second generation iPad or later, allowing you to create high quality recording and playback using an iOS compatible music app, such as Cubasis. You'll need an Lightning to USB camera adapter for connection to the iPad.