About the Yamaha DCP4V4S
This in-wall panel offers source selection and individual volume control for up to four input sources. It is compatible with Yamaha's MA2120 mixer/amplifier and PA2120 amplifier.
Product highlights:
- in-wall volume and source selection control
- individual volume control for each of four inputs
- compatible with Yamaha MA2120 mixer/amplifier and PA2120 amplifier
- backlit for ease of use in darkened environments
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # DCP4V4S-US
What's in the box:
- Wall-mounted volume control
- Plastic cover (white)
- Owner's Manual
- Important Notice
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Yamaha DCP4V4S
Product Research
Features
Overview: The DCP4V4S is a wall-mounted volume control designed for use with select Yamaha commercial amplifiers, such as the MA2120 and PA2120. The unit comes with a white plastic trim cover.
Design: The DCP4V4S features four rotary encoders so you can independently raise and lower the output volume of each input connected to the amplifier. The control panel is also equipped with four buttons for selecting the input source. When connected to the MA2120, you will need to pre-program the control by positioning the four DIP switches to one of the following configurations (positions of DIP switches are in the Owner's Manual):
| Panel ID | Encoder 1 | Encoder 2 | Encoder 3 | Encoder 4 |
| 0, 1 | Volume Control Line Out A | Volume Control Line Out B | Volume Control Speakers A | Volume Control Speakers B |
| 2 | Volume Control Input 1 | Volume Control Input 2 | Volume Control Input 3 | Volume Control Input 4 |
| 3 | Volume Control Input 5 | Volume Control Input 6 | Volume Control Input 7 | Volume Control Input 8 |
| 4, 5 | Volume Control Input 1 | Volume Control Input 3 | Volume Control Speakers A | Volume Control Speakers B |
| 6, 7 | Volume Control Input 7 | Volume Control Input 8 | Volume Control Speakers A | Volume Control Speakers B |
| Panel ID | Switch 1 | Switch 2 | Switch 3 | Switch 4 |
| 0, 1 | --- | --- | --- | --- |
| 2 | Input 1 On/Off | Input 2 On/Off | Input 3 On/Off | Input 4 On/Off |
| 3 | Input 5 On/Off | Input 6 On/Off | Input 7 On/Off | Input 8 On/Off |
| 4, 5 | Input 1 On/Off Chime On Mute Input 7 & 8 | Input 2 On/Off Chime On Mute Input 7 & 8 | --- | --- |
| 6, 7 | --- | --- | --- | --- |
Note: When connected to the PA2120, functions are limited to Volume Control Speaker A (Encoder 3) and Volume Control Speaker B (Encoder 4).
Installation: The DCP4V4S is designed to be installed in a triple-gang electrical box with a depth of 1.75" or more. Hardware for installing the control panel is not included. The Control Panel is connected to the amplifier via Ethernet cable. CAT5e or higher should be used. Up to 8 Control Panels can be connected to the PA2120 within a maximum cable length of 650 feet (200m). When connected to the MA2120, only two Control Panels can be connected within 2525 feet (800m).
Loading accessories...
Customer Q&A
Loading articles...
