About the Yamaha MG12
Reliable control of your music
Reliable control of your music
Yamaha used their extensive acoustical knowledge and engineering skills in offering you the MG12 mixer. This 12-channel mixer can bring order and balance to your music, and help you make it all sound great, whether produced in church, home studio, dance club, or on the road.
The six microphone inputs feature Yamaha's D-PRE mic preamps, designed for their high-end recording consoles, which use a special Class A amplifier circuit to faithfully reproduce a microphone's signal without sacrificing warmth. The MG12 also offers stereo line-level inputs that can accommodate unbalanced signals via 1/4" TS or RCA plugs.
In addition to the main left/right stereo outputs, the MG12 sports 2 auxiliary and 2 subgroup outputs, presenting you with an array of output channels for PA speakers, monitors, and recording.
Four channels of the MG12 come loaded with a one-knob audio compressor, for smoothing the dynamics of sounds that don't always maintain consistent levels, like vocals or horns.
Six channels have 3 bands of EQ to help you adjust voices and instruments. You'll find the peak lights, pre-fader listen bus, and LED meter handy for keeping channels clean and distortion-free. The MG12 comes in a powder-coated steel chassis that's ready to endure the occasional but inevitable bumps that occur along the way.
- channels 1-4:
- mono mic/line inputs (XLR and 1/4" TRS)
- switchable 26 dB pad
- channels 5/6 and 7/8:
- mono mic and stereo line inputs (XLR and 1/4" TS)
- channels 9/10 and 11/12:
- stereo line inputs (1/4" TS and RCA)
- all microphone inputs:
- D-PRE Class A microphone preamps
- phantom power (+48 volts)
- switchable high-pass filter (80 Hz, 12 dB/octave)
- 3-band EQ on chs 1-8 — high: 10,000 Hz (shelving), mid: 2,500 Hz (peaking), low: 100 Hz (shelving)
- 2-band EQ on chs 9-12 — high: 10,000 Hz (shelving) and low: 100 Hz (shelving)
- peak lights on chs 1-8
- dynamic compression available on chs 1-4 (single-knob control)
- 2 auxiliary bus/outputs — Aux 1 : pre-/post-fader (switchable), Aux 2: post-fader
- 2 subgroups (one stereo pair) with direct outputs
- LED output meter with peak indicator
- PFL (pre-fader listen) for metering and monitoring individual channels
- on/off, pan, and stereo/group assignment controls on each channel
- headphone and monitor outputs
- metal chassis
- weight: 8.8 lbs
- dimensions: 12-1/8"W x 4-5/8"H x 16-5/8"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # MG12
What's in the box:
- 12-Channel mixing console
- AC power cord
- Owner's Manual
- Technical Specifications
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Yamaha MG12 reviews
Thanks for submitting your review
More details on the Yamaha MG12
Features & specs
|Line inputs||Combo (6), Phone (8)|
D-PRE (Discrete Class-A Mic Preamps): This MG Series mixing console features Yamaha's studio-grade discrete class-A D-PRE preamps, which utilize an inverted Darlington circuit comprising two cascading transistors in a configuration that provides more power with lower impedance. Delivering fat, natural sounding bass and smooth, soaring highs, with very low distortion, D-PRE preamps possess an impressively wide frequency range that allow them to handle signal from any audio source without overly amplifying any specific elements of the sound. Having such a pure sonic platform to build on will ultimately save you time and effort by eliminating the need for excessive EQ-ing or additional effects processing in order to "fix" your mix.
High Quality Sound Op-Amp: The MG Series mixer features new, high-quality, custom made MG01 op-amps that we developed in cooperation with the semiconductor manufacturer. Although many other Op-amps prioritize electrical design and efficiency, we worked directly with the semiconductor manufacturer to focus on sound quality first. MG01 op-amps feature redesigned circuitry in which even the internal components and wiring have been optimized, and use materials such as high-quality silicon wafers and copper wire to achieve superb resolution.
12-Channel Inputs: The Yamaha MG Series mixer provides twelve total channel inputs; there four Mic/Line mono input jacks (Ch1-Ch4), four Mic/Line stereo/mono input jacks (Ch 5/6-7/8), and four Line stereo input channels (Ch9/10-11/12). The four Mic/Line mono input jacks utilize high-quality Neutrik connectors which can support both XLR and phone plugs; use these to connect a microphone, an instrument, or an audio device. The four Mic/Line stereo/mono input jacks support either XLR-type connectors or phone plugs to connect an electric keyboard or other audio device. The four Line stereo input jacks only support phono-plugs for line-level instruments and devices.
Stereo & Monitor Outputs: The main stereo outputs consist of stereo XLR-type connectors and phono plugs to connect to powered speakers or a powered amp. The mixer also features a standard 1/4" headphone jack for private listening. In addition, there is a stereo monitor output which consists of phone plugs to connect to a monitoring system. Rugged and dependable, these professional connectors ensure stable signal transmission even in the most demanding environments.
Aux/Effect Sends/Group: The MG Series mixer features AUX sends for expanding your sound reinforcement or recording setup, allowing you to incorporate additional effects, output to external recording devices, or feed to an monitoring system. The mixer also feature one stereo group bus that can be used for convenient channel grouping.
Switchable Phantom Power & PAD Switch: With +48V phantom power (for the Mic channels), the MG Series console allows you to take full advantage of the greater frequency response and high sound quality of condenser microphones. The Mic/Line Ch 1-4 input channels feature a PAD switch; the PAD Switch attenuates high input signals that often accompany mic'ed instruments during performance, avoiding the clipping that can seriously affect your mix.
Gain Knobs & Level Faders: The Mic/Line channels offer independent gain control to determine the basic volume level of each channel. The Level faders determine the volume of the signal from each input channel to the main mixing output.
1-Knob Compression: Compression plays an essential role in just about any recording or sound reinforcement environment by altering the level of dynamics of an audio signal when you need livelier guitars, punchier bass lines, a tighter snare, or a cleaner vocal sound. However, it can take countless hours to master the complexities of even the most basic outboard compression units and use them effectively. Originally a Yamaha innovation, 1-knob compressors are now an industry standard that gives you instant access to optimized compression settings via a single rotary control. 1-Knob compressors are found on Mic/Line input channels 1-4.
EQ & High-Pass Filters: The MG Series mixer benefits from Yamaha's unparalleled experience in designing pro audio gear, featuring 3-band equalizers (High = 10kHz, Mid = 2.5kHz, & Low = 100 Hz) on all channels 1-7/8 and 2-band equalizers (High = 10kHz & Low = 100 Hz) on channels 9/10-12 for precise control of your sound. High-pass filters (80Hz) for channels 1-7/8 allow you to eliminate unwanted low-frequency noise, for a smoother, cleaner mix.
Pre-Fader Listen (PFL): The PFL (Pre-Fader Listen) switch lets you monitor the channel's pre-fader signal, before any level adjustment. When the switch is "On", the pre-fader signal is output to your monitor speakers for monitoring.
LED Level Metering: Easy-to-read LED level metering allows output levels to be monitored with precision.
Metal Chassis: The MG Series mixer features a rugged, impact-resistant, powder-coated metal chassis, offering an unrivalled level of durability. With a sleek design contoured for optimal convection cooling, the internal layout separates the power supply from the analog circuitry for superior noise reduction, and further extends the life of the components inside. To further ensure reliable performance, knob control placement above the surface of the chassis diverts any impact or pressure on the knobs to the chassis itself and not the circuit board or components underneath.
Internal Power Supply: The MG Series mixer features a universal switching power supply. This power supply supports input voltages of 100 V to 240 V, for stable operation even in environments where power voltage fluctuates easily. Lowering the impedance of the power supply has resulted in improved sound quality with a faster attack. An AC inlet allows simple installation in environments where portability is required, as well as when mounting the mixing console in a rack.