8" 2-way surface-mount commercial speakers (Black)
Our take on the Yamaha VXS8 by Crutchfield's Eric Angevine
Full-range sound with more bass
Yamaha VXS8 speakers provide background music and live paging for small businesses, and they're designed to fit into your decor. Each provides a 8" woofer for lows and mids, and a 1" soft dome tweeter for exceptional high-end clarity. These speakers feature multi-tap transformers for use with 70-volt or 100-volt audio systems, while an 8-ohm bypass setting allows use with regular home audio receivers and amps.
Get a free system design
- on-wall speaker with 8" woofer and 1" soft dome tweeter in a bass-reflex enclosure
- 120° conical coverage
- frequency response: 51-20,000 Hz (-10 dB)
- 180 watts program power
- maximum SPL: 117 dB
- sensitivity: 91 dB
- multi-tap transformer for 70V or 100V systems
- 30, 15, 7.5 and 3.8-watt taps
- 8-ohm bypass setting for use with regular home audio receivers and amps
- wall mounting hardware included
- paintable powder-coated aluminum grille
- 10-15/16"W x 16-15/16"H x 9-7/16"D
- weight: 18.1 lbs.
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- 2 Surface-mount loudspeakers
- 2 Grilles (pre-installed)
- 2 Speaker brackets
- 2 Wall brackets
- 2 Bracket covers
- 2 Terminal covers
- Owner's Manual
- 4 Phillips-head screws (lock-/flat-washers attached)
- 2 Hex-head screws (lock-/flat-washers attached)
- 2 Security cables (with hardware)
- 2 Carter-keys
- Additional Notice
Why Shop With Us?10 Reasons.
Features and Specs
|Drivers per speaker||2|
|Woofer Size (inches)||8|
|Tweeter Size (inches)||1|
|System Frequency response||62-20k|
|Peak Power rating||0|
VXS Series: Yamaha designed their new VXS series loudspeakers to accommodate a growing list of applications in the installation market. While these speakers deliver quintessential Yamaha sound quality, they have also been carefully designed for safe and easy installation.
Two-Way Driver System: The VXS series loudspeakers feature a newly customized 1" soft dome tweeter and a 8" cone woofer capable of providing superb music reproduction as well as crystal clear announcements for public address applications.
Carefully Designed Enclosure: Several aspects of the speaker enclosure design reflect a strong emphasis on functionality as well as the aesthetic features of their construction, effectively enhancing sound quality and speaker performance without disturbing the interior décor of the installation. The speaker cabinets are built tough to meet the demands of a wide variety of commercial environments, constructed from a carefully selected plastic with just the right tensile strength, and designed with optimized bass-reflex tuning to offer a firm, tight low-end. The hexagonal design of the grille actually improves sound clarity by raising the aperture ratio. Similarly, the smooth curves of the surface-mount cabinet's simple yet sophisticated design allow the speakers to be mounted closely to the wall, while still fully capable of panning and tilting to target service areas.
Note: The speaker enclosure is IP35 rated for outdoor applications, so it can be mounted outdoors under a porch or eve. The speaker should never be submerged in water.
Euroblock Connectors: Input connection is conveniently provided by a removable euroblock connector (4-pin), providing secure connection via screw-down terminals and allowing a system to be pre-wired before installing the speaker for fast snap-on convenience. Separate connector terminals are available for the input and for the loop-through wires, making it easy to jumper the speaker signal to additional speakers. The input terminal plate provides strain relief for bare wire (up to 12 AWG) and conduit tube (up to 0.5"). Terminal covers are provided to meet safety codes & standards.
- Input Terminals: Terminals 2 (+) and 3 (-) are the input terminals of the loudspeaker.
- Loop-Thru Terminals: Terminals 1 (+) and 4 (-) are the loop-thru terminals to output connection to other speakers.
70V/100V Compatible: The VXS series loudspeakers include a 60W multi-tap transformer for use in either 70V or 100V distributed-line systems. Taps are selected with a rotary switch located on the back panel of the speaker.
- 70V Taps: 60W, 30W, 15W, 7.5W
- 100V Taps: 60W, 30W, 15W, 7.5W
Note: The speaker is also switchable for 8-ohm voice-coil direct operation.
Surface-Mount Bracket: The VXS series speakers come with a dedicated bracket for safe, trouble-free speaker installation. The speakers can be mounted temporarily, freeing your hands to adjust mounting angles, which can be configured consistently with ease thanks to the gear guides in the bracket connectors. Furthermore, the bracket base allows the VXS series speakers to be mounted on both walls and ceilings without the need to prepare a different set of brackets. The brackets allow the speakers to tilt up or down and swivel left or right.
Paintable: The VXS series loudspeakers comes with paintable speaker bodies, grilles, and brackets.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Rob made a great suggestion! [ Reynolds May 10, 2018 ]
Frequently Compared With
8" 2-way surface-mount commercial speakers$508.00 pair
6" in-ceiling 2-way speaker for distributed audio systems
JBL Control® 25AV
5-1/4" 2-way weather-resistant surface mount speakers
JBL Control® 29AV
8" 2-way surface mount speaker for distributed audio systems