Steel wall mount for PA speaker — swivels and tilts for best sound coverage
Our take on the K&M 24120 by Crutchfield's Buck Pomerantz
Hang and aim a speaker where it needs to go
Need to mount a PA speaker on a wall? K&M's 24120 wall mount holds a speaker weighing up to 110 pounds firmly and safely, right where you want it. You can adjust the support arm to aim your speaker in eleven different tilt angles from horizontal to 22 degrees down, ensuring your audience gets good sound coverage. The support arm also swivels so you can aim your speaker to the left or right for even better coverage.
Standard-size speaker pole mount
You set your speaker onto the locking pin on the 24120's support arm, like you would with a regular speaker stand. You then lock the speaker in place with the tightening nut, which expands the pin to grip the inside of the speaker's mounting socket. Speaker secured!
- steel wall mount for a PA speaker
- supports up to 110 pounds (50 kg)
- holds speaker at a downward tilt angle of 0 to 22 degrees in 11 increments
- support arm swivels up to 180°
- mounting pin fits standard 35-37 mm speaker pole sockets
- expanding pin grips speaker socket
- black powder-coated steel construction
- weight: 13.6 lbs
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- Wall plate
- Cantilever arm
- Support arm
- 3 Bolts (M6x60mm)
- 3 Safety nuts (M6)
- 6 Washers
- 8 Plastic caps
- Assembly manual (Eng / Germ)
- Safety and warnings
Why Shop With Us?12 Reasons.
Overview: The König & Meyer (K&M) Speaker Wall Mount (24120) is an adjustable bracket designed to mount a single speaker equipped with a pole-mount opening 35-37mm in diameter. The mount's wall tube, support tube and extension arm are made of sturdy steel tubing, giving it a load capacity of over 110 pounds (50 kg). The angle of the speaker can be adjusted from 0° to 22°. Hardware for attaching the mount to a wall is not included.
Adjustable Angle: The wall mount's extension arm has an adjustable support that can be moved up or down to increase or decrease the angle of the arm. There are 11 support arm positions to set the extension arm angle at 0°, 2.5°, 5°, 7.5°, 10°, 12°, 14°, 16°, 18°, 20° or 22°.
Mounting Post: The 24120 Speaker Wall Mount has a post on the extension arm that fits speaker pole-mount sockets ranging from 35mm to 37mm in diameter. A tightening bolt on the bottom of the post allows it to be adjusted for a snug speaker fit.
Safety Precautions: The 24120 Speaker Wall Mount will safely hold a large heavy speaker when properly mounted in solid wood, masonry, concrete, or brick, using appropriate screws and wall anchors (not included). The speaker must be mounted, and the angle adjusted, by technicians who have the physical capacity for the procedure.
- Maximum Load: 110.2 lbs. (50 kg)
- Mounting Post: Diameter 35-37mm, Length 3.42"
- Wall Tube: Width: 1.59", Height: 1.64", Length: 17.125"
- Extension Arm: Width: 1.59", Height: 0.80" (4.82" including mounting post), Length: 18.375"
- Support Tube: Width: 1.86", Height: 0.91", Length: 9.875"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.