About the Wet Sounds SPOOL 5M-RGB
Get lit with Wet Sounds
Get lit with Wet Sounds
Searching for a way to make your boat even more stylish and distinctive? Try a set of Wet Sounds LED lights. Run them along the gunwales or across a wakeboard tower, or anywhere you like – they'll look great and put out just the right amount of light.
These ultra-efficient lights run off of standard 12-volt power, and you can add Wet Sounds controllers to adjust the colors and effects to suit your mood or the music. Also available in blue.
Add the Wet Sounds RGB Connector Kit for longer runs or if you're expanding an existing Wet Sounds RGB LED lighting system. The package includes 5 RGB slice connectors and 5 RGB extension connectors.
- 5-meter spool of LED lights
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # SPOOL 5M-RGB
What's in the box:
- 16.4' LED spool (RGB)
Wet Sounds SPOOL 5M-RGB reviews
Great quality product. If you plan to use as one big strip (16.4 feet long) it's super easy, just connect 4 wires to a switch or a controller. If you plan to cut into sections like a boat, plan to do some soldering on very small electronics or have a shop install them. You will need some way of attaching them, I used 3M double sided tape 10mm wide. If you just want one or two colors get a DPDT toggle switch (black wire is battery positive). If you want 256 colors or ability to change to the music, get the controller ($116). I plan to do a full review on YouTube soon.
Pros: Well made, bright, flexible
Cons: Self-adhesive not included, RGB-W with White would be better, difficult to install due to soldering tiny wires
0 of 0 found this helpful
More details on the Wet Sounds SPOOL 5M-RGB
RGB LED Spool: This 16.4' (5M) LED spool features 300 silicone-coated, multi-color RGB LED lights with over 256 color option. The LED Spool will run off of standard 12-volt power, and you can add Wet Sound's RF remote control RGB controller (867SYNC4, sold separately) to give you a wireless control option on the colors or effects you want. This LED Spool can be trimmed and installed in 2" increments.
Wiring: If you are using the RGB LED Spool without the RGB controller (sold separately), you'll be limited to one color pattern (Red, Green, or Blue).
- Red Wire: connect to ground for red LED lightning
- Green Wire: connect to ground for green LED lighting
- Blue Wire: connect to ground for blue LED lightning
- Black Wire: connect to +12V accessory/switched power
4 questions already asked