About the Wet Sounds REV 6X9-SM-B
Get ready to get louder
Get ready to get louder
Wet Sounds Revolution Series speakers let you enjoy full-range sound even when you're at full throttle. Exclusive REV TEC technology gives these high-output speakers the power and precision you expect from Wet Sounds. Designed to be mounted under the gunwales on offshore boats, these marine-rated 6"x9" speakers are also ideal for other surface-mount applications on land or sea.
Tough and thunderous
You can mount them just about anywhere, really, thanks to the rugged Roto-Mold housings, durable grilles, and marine-tested componentry. These speakers will handle up to 150 watts RMS, so you can expect some impressive sound levels from the epoxy fiberglass woofer and the coaxially-mounted titanium compression drivers.
Available in Black or White, these tough, powerful speakers look great and stand up to wind and weather. They're ideal for your other recreational rides, too — you can mount these Wet Sounds speakers on off-road vehicles, golf carts, ATVs, UTVs, and even RVs.
- black 6" x 9" marine-rated surface mount speaker
- titanium Horn-Loaded Compression Driver (HLCD)
- rugged Roto-Mold housing
- power handling: 150 watts RMS (300 watts peak)
- impedance: 4 ohms
- frequency response: 20-20,000 Hz
- sensitivity: 90 dB
- dimensions: 16-7/8"W x 7"H x 8-3/4"D
- weight: 10-1/2 lbs.
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # REV 6X9-SM-B
What's in the box:
- 2 Enclosed surface-mount marine speakers (attached 15" speaker wire)
- 2 Brackets
- Four M5 x 50mm screws
- Four M5 x 70mm screws
Wet Sounds REV 6X9-SM-B reviews
Excellent sound quality and loud enough to damage your hearing.
Pros: High Quality Excellent sound output Easy to install
Cons: Expensive but worth it
1 of 1 found this helpful
More details on the Wet Sounds REV 6X9-SM-B
Features & specs
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
90 dB at 1 watt |
|Frequency Response||20 - 20k Hz|
|Max RMS Power Handling||150|
|Peak Power Handling (Watts)||300|
|Top-mount Depth (Inches)||N/A|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||0|
Enclosed Surface-Mount Marine Speaker: The Wet Sounds REV 6X9-SM is an enclosed, surface-mount marine-grade speaker. They deliver amazing sound throughout your boat, ATV, Golf Cart or most any application. The REV 6X9-SM is the perfect speaker system for installation under the gunnels on larger off shore boats as well, providing amazing output and full sound everywhere in the boat with no visible speakers.
REV TEC Technology: The REV 6X9-SM uses Wet Sounds' proprietary REV TEC technology. Unlike most conventional designs, REV TEC technology provides remarkable volume and amazing full-range sound quality on axis and off axis at long distances.
Pro-Axial Driver Design: The driver compliment in each REV 6X9-SM speaker combines one 6x9-inch EFG cone woofer with polyurethane surround and one coaxially mounted HLCD (Horn Loaded Compression Driver). This combination provides high output, full-range sound.
EFG (Epoxy Fiber Glass) Speaker Cone: Wet Sounds developed a proprietary cone material called EFG, which is an epoxy and fiberglass composite mix. This cone material incorporates characteristic values that are impermeable to damage from intermittent Ultra Violet exposure and minimal moisture exposure. Like the EFG cone material, the Polyurethane that is used for the surround will provide protection against Ultra Violet exposure and moisture. This will prevent deterioration of the surround yielding longer life and better reliability.
HLCD (Horn Loaded Compression Driver): The high frequency transducer is an HLCD (horn loaded compression driver). This driver was designed to provide a wide; horizontal trajectory that would not only produce sound in the directed path but will disperse sound off axis with little to no degradation. The HLCD is considered to be one of the most efficient transducer designs providing remarkable output while using less power. This unique design incorporates the HLCD mounted to the rear of the EFG driver. Through the voice coil former, the compression sound travels out of the horn flare that is mounted coaxially to the EFG driver.
Roto-Molded Enclosure: The Wet Sounds REV 6X9-SM features a durable marine-grade surface mountable housing (available in black or white). The enclosure is roto-molded of UV resistant, corrosion free polyethylene for exceptional durability and less vibration. A silver plastic grille is also included to protect the Pro-Axial driver.
Surface Mounting: The Wet Sounds REV 6X9-SM mount to a flat surface of your boat using the included brackets and screws. For under gunnel use, a minimum width of 7" is needed for placement. Dimensions are as follows -
- Width = 15.75"
- Height = 8.0" (mounting brackets add 1.5" to overall height)
- Depth = 7.0625"
- Weight = 10.6 lbs
Speaker Wire: Each Wet Sounds REV 6X9-SM enclosed, surface-mount speaker features an attached 15" speaker wire. Additional speaker wire sold separately (see Accessories tab).