About the Wet Sounds Stealth-10 Core V2
Bigger sound for the great outdoors
Bigger sound for the great outdoors
Mounting bolts and brackets included
Building a sound system for an ATV, golf cart, or small boat used to require a certain amount of "shade tree engineering" and, depending on how serious you were about sound, some creative fabrication work. Not anymore. The Stealth-10 Core V2 from Wet Sounds is the perfect sound bar for your high-performance audio system, whether you're blasting through a mudhole or cruising up to the 19th hole.
With eight 3" full-range drivers and a pair of 1" titanium tweeters, this marine-rated speaker system pumps out plenty of rich, dynamic sound and will work with amps (sold separately) up to 75 watts x 2.
Smart, sturdy, and ready for adventure
Outdoor life can be tough on equipment, but this rugged sound bar is built to handle it, with an extruded aluminum housing, stainless steel hardware, and a durable, waterproof wiring harness. And Wet Sounds includes all the hardware you need to install the Stealth-10 Core V2, with a universal L-mount bracket for end cap mounting or a sliding top-mount channel system.
Works with your amplifier
You will need a seperate amplifier to power this "passive" sound bar. If you want to add a sound bar, but don't have room for a separate amp, check out the "active" Stealth-10 Ultra V2 , which has a built-in Class D amplifier.
- 34" non-amplified sound bar designed for ATV, golf cart, and marine use
- 8 marine-rated 3" full-range drivers
- 2 marine-rated 1" titanium tweeters
- waterproof wiring harness
- universal-fit aluminum L-mount bracket for end cap mounting
- sliding top- or bottom-mount channel
- amplified (sold separately) required
- handles up to 75 watts RMS by 2 channels (150 peak)
- dimensions: 33-3/4"L x 3-15/16"D x 3-3/4"H
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # Stealth-10 Core-B
What's in the box:
- Passive soundbar speaker (attached 35" speaker wire)
- 2 "L"-brackets
- 2 Spacers
- Two M7 x 40mm bolts
- Two M7 x 38mm bolts
- Two M7 x 25mm bolts (w/ collars attached)
- 4 Large flat-washers
- 4 Small flat-washers
- 6 Lock-washers
- 4 Hex-nuts
- 6 Wire-ties
- 2 Wet Sounds stickers
Wet Sounds Stealth-10 Core V2 reviews
These things are junk. I have a 6 speaker and a 10 speaker and after about 2 months they show being turned off but drain the battery. And the 10 left side quits working after 20 min. Would not buy again.
Cons: Does not last. Pain to install and then had turn around and take them back out after a month.
6 of 9 found this helpful
More details on the Wet Sounds Stealth-10 Core V2
Features & specs
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Max RMS Power Handling||75|
|Peak Power Handling (Watts)||150|
Stealth Core Series Soundbar: Wet Sounds Stealth 10 Core is a passive soundbar speaker designed for Side-by-Side's, ATV's, and golf carts. It requires an external 2-channel amplifier (sold separately) for power.
High-Performance Speaker Array: The Stealth 10 Core soundbar features a high performance speaker array with two 1" titanium tweeters and eight 3" midrange drivers for a rich, dynamic full-range performance.
Rugged Aluminum Construction: The Stealth 10 Core soundbar is built with a full extruded aluminum housing.
Attached Speaker Wire: The Stealth 10 Core soundbar features an attached 4-conductor speaker cable for connecting a 2-channel power amplifier.
Mounting Options: The Wet Sounds Stealth 10 Core includes universal L mount brackets for end cap mounting or a sliding top mount channel system. Additional mounting hardware is sold separately (check accessory list).