About the Wet Sounds REVO CX-10 XS-W-SS
Big, bold speakers with LED lighting
Big, bold speakers with LED lighting
These powerful REVO 10CX 10" marine speakers from Wet Sounds give you big sound and bold style, with integrated RGB LED lighting that lets you choose from thousands of custom color options. Designed to produce big sound in even the roughest conditions, the REVO Series is a great choice for your boat.
Stainless steel grilles
Built tough for the outdoors
When it comes to marine-rated gear, you'd expect a company with "Wet" in its name to know a thing or two. And these speakers are further proof that Wet Sounds really knows marine audio. Their cast-aluminum frame speaker frames and stainless-steel grilles are tough enough to withstand the rigors of life on the water. Injection-molded composite cones and integrated 1-1/4" titanium dome tweeters provide powerful, accurate sound, while long-lasting Santoprene rubber is used on the spiders and surrounds for maximum protection from the elements.
Add a remote
The Wet Sounds RF-RGB-MC V2 music controller (sold separately) is a great way to keep the party going on your boat. This handy remote controls your LED speakers using the most advanced PWM remote control technology. You can choose your favorite accent color, or explore five multi-light color change modes or three music modes. Designed for boaters, the remote offers low power consumption, anti-interference circuitry, and long-distance transmission range.
- 2-way 10" marine speakers (pair)
- variable-color RGB LED backlight
- composite cone woofer with Santoprene rubber surround
- 1-1/4" titanium dome tweeter
- cast-aluminum frame
- stainless-steel grilles
- durable rubber spider and magnet boot
- handles up to 350 watts RMS (700 watts peak)
- frequency response: 35-22,000 Hz
- sensitivity: 90 dB
- impedance: 2 ohms
- top-mount depth: 4-3/4"
- cutout diameter: 11.02"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # REVO CX-10 XS-W-SS
What's in the box:
- Two 2-way marine speakers
- 2 Grilles (each has tweeter and multi-color LEDs built-in)
- 2 Rubber mounting gaskets
- Two 8" Waterproof 4-pin female SuperSeal LED (RGB) harnesses
- Twelve 1-1/2" Stainless steel Phillips head screws
Thanks for submitting your review
More details on the Wet Sounds REVO CX-10 XS-W-SS
Features & specs
|Tweeter Design||1-1/4" Dome|
|Woofer Composition||Injection-Molded Composite|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
90 dB at 1 watt |
|Frequency Response||40 - 20k Hz|
|Max RMS Power Handling||350|
|Peak Power Handling (Watts)||700|
|Top-mount Depth (Inches)||4 5/8|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||9 7/16|
Rubber Spider: Durability is improved by the rubber spider Wet Sounds developed for their marine speakers.
Tweeters: The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone.
LEDs: There are red, green, and blue LEDs in the back of the tweeter casing, to create a glow on the woofer cone. The LEDs can be powered individually, or in any combination you like. A 12 volt power supply is needed to turn the LEDs on and a 2-amp fuse should be added in-line (fuse not included). The LEDs can also be controlled using Wet Sounds' wireless RGB Music Controller remote (item number 867RFRGBMC, sold separately). A male 4-pin waterproof SuperSeal plug is on the wire connected to the LED housing, which connects to the included female SuperSeal harnesses.
Grilles: The included grilles are not fixed, but the tweeters are mounted to the grilles, so they must be installed. (Otherwise it's not a 2-way speaker.)
Binding Posts: The binding post wire terminals will accept pin connectors, spade lugs, single banana plugs, and bare wire up to 10-gauge. The binding posts are spaced too far apart to accept standard dual banana plugs (3/4").