Contact us
Close contact box

Wet Sounds RECON 6 XW-W

6-1/2" marine speakers (White)

Item # 867RC6XWW

These RECON Series speakers bring high-quality sound to low-power applications

These RECON Series speakers bring high-quality sound to low-power applications

Need help?
Contact our Virginia-based experts.

Item # 867RC6XWW

Ships free

Low Stock
$199.99 pair
Add to wishlist

About the Wet Sounds RECON 6 XW-W

Big sound that doesn't require an amp

If you don't have room for an amplifier and still want to experience rich, powerful sound, these rugged speakers are a great choice for your boat or outdoor vehicle. Wet Sounds designed their RECON Series speakers to bring high-quality sound to low-power applications, so you can get great performance even when they're connected to a marine receiver.

Big sound that doesn't require an amp

If you don't have room for an amplifier and still want to experience rich, powerful sound, these rugged speakers are a great choice for your boat or outdoor vehicle. Wet Sounds designed their RECON Series speakers to bring high-quality sound to low-power applications, so you can get great performance even when they're connected to a marine receiver.

Rugged speakers with plenty of power

Each speaker features a 6-1/2" composite cone woofer and a 3/4" aluminum dome tweeter, designed to handle up to 60 watts RMS. The Santoprene rubber surround keeps things tight and the Nylas nylon/fiberglass frame will stand up to life in the outdoors.

READ LESS

Product highlights:

  • 6-1/2" marine speakers (pair)
  • composite woofer with Santoprene rubber surround
  • 3/4" aluminum dome tweeter
  • handles up to 60 watts RMS (120 watts peak power)
  • frequency response: 40-20,000 Hz
  • sensitivity: 89 dB
  • impedance: 4 ohms
  • diameter: 6.8" with grille
  • cut-out diameter: 5"
  • depth: 2.6"
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # RECON 6 XW-W
KEEP READINGREAD LESS

What's in the box:

  • Two 2-way marine speakers
  • 2 Grilles (attached)
  • 2 Rubber gaskets
  • Two 8" Waterproof 2-pin female SuperSeal speaker harnesses
  • Eight 1-1/4" Stainless steel Phillips head screws
  • 2 Templates

Customer reviews

Loading reviews...

Wet Sounds RECON 6 XW-W reviews

Average review:

1 review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Solid boat speakers

Crutchfield customer from North Andover, MA on 8/3/2019

Verified customer (What's this?)
Verified employee purchase (What's this?)

Great speakers at a reasonable price!

Pros: Easy installation, great sound, solid option if not have amp

Cons:

Crutchfield response on

0 of 0 found this helpful

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Wet Sounds RECON 6 XW-W

Product Research

Features

Nylas Basket and Grille: Both the speaker frame and grille are made of Nylas, a composite mix of Nylon and Fiberglass, providing strength and stability. The grilles are held in place by three screws, accessible under the mounting gasket, but the tweeter is mounted to the grille, so it should not be removed.

Rubber Spider: Durability is further improved by the rubber spider Wet Sounds developed for their marine speakers.

Tweeters: The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone.

Speaker Terminals: A male 2-pin waterproof SuperSeal plug is on the signal input wire, which connects to the included female SuperSeal harnesses. The red wire is positive and the black wire is negative.

Size: These speakers fit into the openings for standard 6½ and 6¾ speakers (standard car speaker sizes). Because the frame is bigger than a typical car speaker and the grille is not designed to be removed, they won't fit in most car applications.

Loading accessories...

Customer Q&A

1 question already asked

Q
Is 6 1/2" the overall size of the speaker of the cutout size? My existing speaker measures 7".
[ Darrin  Aug 06, 2019 ]
1 answer
A
6-1/2" describes the driver size. The overall diameter (frame and all) of this speaker is 6.875" with a cutout hole requirement of 4.866"
[ Paul  Aug 14, 2019 ]  Staff

Loading articles...

TOP