About the Wet Sounds RECON 6 XW-W RGB
Thunderous sound and cool light
Thunderous sound and cool light
Wet Sounds designed their RECON Series speakers for low-power applications, so you'll experience rich, powerful sound even when you don't have room for an amplifier. You'll also enjoy how the built-in RGB LED lighting will dress up your boat or off-road vehicle.
Rugged speakers with plenty of power
Each speaker houses a 6-1/2" composite cone woofer and a 3/4" aluminum dome tweeter, designed to handle up to 60 watts RMS. The Santoprene rubber surround keeps things tight and the Nylas nylon/fiberglass frame will stand up to life in the outdoors.
Product highlights:
- 6-1/2" marine speakers with RGB LED lighting (pair)
- composite woofer with Santoprene rubber surround
- 3/4" aluminum dome tweeter
- handles up to 60 watts RMS (120 watts peak power)
- frequency response: 40-20,000 Hz
- sensitivity: 89 dB
- impedance: 4 ohms
- cut-out diameter: 4-15/16""
- mounting depth: 2-1/2"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # RECON 6 XW-W RGB
What's in the box:
- Two 2-way marine speakers
- 2 Grilles (attached)
- 2 Rubber gaskets
- Two 8" Waterproof 2-pin female SuperSeal speaker harnesses
- Two 8" Waterproof 4-pin female SuperSeal LED (RGB) harnesses
- Eight 1-1/4" Stainless steel Phillips head screws
- 2 Templates
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the Wet Sounds RECON 6 XW-W RGB

Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Design | 2-way | |
Tweeter Design | 3/4" Dome | |
Tweeter Composition | Aluminum | |
Woofer Composition | Composite | |
Woofer Surround | Santoprene Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity |
89 dB at 1 watt | |
Frequency Response | 40 - 20k Hz | |
Max RMS Power Handling | 60 | |
Peak Power Handling (Watts) | 120 | |
Impedance (Ohms) | 4 | |
Top-mount Depth (Inches) | 2 1/2 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 4 15/16 |
Product Research
Features
Nylas Basket and Grille: Both the speaker frame and grille are made of Nylas, a composite mix of Nylon and Fiberglass, providing strength and stability. The grilles are held in place by three screws, accessible under the mounting gasket, but the tweeter is mounted to the grille, so it should not be removed.
Rubber Spider: Durability is further improved by the rubber spider Wet Sounds developed for their marine speakers.
Tweeters: The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone.
LEDs: There are red, green, and blue LEDs in the back of the tweeter casing, to create a glow on the woofer cone. The LEDs can be powered individually, or in any combination you like. A 12 volt power supply is needed to turn the LEDs on and a 2-amp fuse should be added in-line (fuse not included). Depending on what combination of LED wires is connected, they light red, green, blue, yellow, purple, aquamarine, or white. The LEDs can also be controlled using Wet Sounds' wireless RGB Music Controller remote (item number 867RFRGBMC, sold separately). A male 4-pin waterproof SuperSeal plug is on the wire connected to the LED housing, which connects to the included female SuperSeal harnesses. (The black wire is +12 volts, the red, green and blue wires are ground.)
Speaker Terminals: Similar to the LED wiring, a male 2-pin waterproof SuperSeal plug is on the signal input wire, which connects to the included female SuperSeal harnesses. The red wire is positive and the black wire is negative.
Size: These speakers fit into the openings for standard 6½ and 6¾ speakers (standard car speaker sizes). However, because the frame is bigger than a typical car speaker and the grille is not designed to be removed, they won't fit in most car applications.
Loading accessories...
Customer Q&A
Loading articles...