About the Wet Sounds RF-RGB-MC V2
Get the party started
Get the party started
Adding Wet Sounds LED speakers to your boat will get the party started, and the Wet Sounds RGB music controller is a great way to keep it going. This handy remote controls your LED speakers using the most advanced PWM (pulse width modulation) remote control technology. You can choose your favorite accent color, or explore five multi-light color change modes or three music modes — you can set the mood or set the lights to react to the beat of the music. All in all, you'll find thousands of different color combinations available.
Spin the color wheel
The remote's clean, functional design features a capacitive "color wheel" touchscreen, so controlling the hue, brightness, dimming, and music is easy and intuitive. The compact control unit is designed for boaters, with low power consumption, anti-interference circuitry, and long-distance transmission range. You can plug an audio cable from your marine receiver's preamp outputs into the 1/8" (3.5mm) stereo plug on this controller to use the music modes, or just rely on the module's built-in microphone to do the job. Each controller can power up to 10 meters of lighting.
Product highlights:
- RF remote with touch-sensitive color wheel, plus controller
- 3 music modes — LED lighting reacts with the beat of the music
- 5 pre-programmed color changing modes
- can power up to 10 meters of LED lighting per controller
- choose your favorite single color to match your boat
- built-in dimmer control
- remembers last mode when turned off and on
- range: 20-30 meters
- wireless frequency: 433.92 mHz
- output: 2 channels (RGB)
- 12-volt, 7.5A input
- use the built-in microphone or connect your marine receiver's preamp outputs for music modes
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # RF-RGB-MC V2
What's in the box:
Wet Sounds RF-RGB-MC V2 owner's manual
- RF Receiver/Controller
- Removable power and ground terminal (installed)
- 2 Removable RGB terminals (installed)
- Wireless remote control
- Instructions
Reviews
Customer reviews
Loading reviews...
Wet Sounds RF-RGB-MC V2 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Wet Sounds RF-RGB-MC V2
Product Research
Features
Controls (on remote except where noted):
- Power: on
- Power: off
- Color Wheel: choose color; capacitive touch
- Brightness: rocker switch
- Speed: rocker switch; change the speed at which the colors change in multi-color mode
- Multi-Color: rocker
switch; change between the six color modes
- Mode 1: static mode (not blinking); choose one of the seven colors (white, cyan, purple, yellow, blue, green, or red)
- Mode 2: blinks (sharply) between all seven colors
- Mode 3: fades gradually between red, green, and blue
- Mode 4: fades gradually between all seven colors
- Mode 5: single color blink; choose one of the seven colors
- Mode 6: two color blink; choose blue and green, blue and red, or red and green
- Music: rocker
switch; change between the five music control modes; each varies with the
beat of the music connected to the line input
- Mode 1: choose any one of the seven colors to blink (sharply) with the music (white, cyan, purple, yellow, blue, green, or red)
- Mode 2: quickly fades between all seven colors
- Mode 3: gradual fading between all seven colors
- Mode 4: red hopping, green hopping, or blue hopping
- Mode 5: two color mix; choose blue and green, blue and red, or red and green
- Sensitivity: rotary knob on receiver unit; adjusts sensitivity to the music input
Connections (receiver):
- Power/Ground: the removable set screw terminal accepts power and ground wires up to 14-gauge
- RGB Output: there are two removable RGB output set screw terminals; each accepts bare wire up to 14-gauge
- Line Input: the 3.5mm stereo mini-jack input allows integrating the lights with the beat of the music
Remote Dimensions:
- Width: 2-1/8"
- Height: 1"
- Length: 4-3/8"
Specifications:
- Remote Power Supply: 2 AAA batteries (not included)
- Input Voltage: 12 or 24 volts DC
- Output Current: 12 amps max
- Wireless Frequency: 433.92 MHz
- Remote Range: 20-30 meters
- Maximum Output:
- 12 volt input: 144 watts
- 24 volt input: 288 watts
- Control Type: common anode (up to 6 speaker lights)
- Operating Temperature: -4° to + 113° Fahrenheit (-20° to +45° Celsius)
Loading accessories...
Customer Q&A
13 questions already asked
Loading articles...
Pretty easy set up, works well with remote. Has sensitivity knob for those music nights. Overall pretty happy with it. Can pretty much choose any colors
William from Haysville, KS