About the Wet Sounds Stealth AS-10
Boaters need bass, too
Boaters need bass, too
The Wet Sounds Stealth AS-10 marine sub gives you a bunch of bass power in a rugged housing that's tough enough for the great outdoors. This powered sub features a high-efficiency Class D amp that delivers 500 watts to its 10" marine speaker, so it's ready to bring some bump to your boat or ATV.
Computer matched for optimum performance
The subwoofer driver is computer-matched to the enclosure, so you'll get plenty of low-end performance from this compact package. It comes with a remote level control, so you can tune it to suit your musical tastes. You can choose between auto or manual turn-on.
Built to take it
You won't have to worry about overtaxing it either, thanks to performance-oriented thermal and over/under voltage protection. The package includes a durable aluminum grille, so there will be no issues with anything in the boat sliding over and damaging your sub.
The finishing touch
If you already have a Stealth soundbar, this sub makes the perfect finishing touch to an awesome all-weather stereo system.
Important Note: This Wet Sounds sub only has a mini-jack input. If you want to connect it to a marine receiver that has a pair of RCA sub outs, you'll need a Hosa Stereo Mini Breakout Adapter to convert the male mini-jack into male RCAs.
- sealed, waterproof poly enclosure with 10" subwoofer
- built-in 500-watt Class D amp
- high-excursion subwoofer driver is computer-matched to the enclosure
- auto or manual turn-on function
- thermal and over/under voltage protection
- durable aluminum grille
- remote level control included
- mini-jack input (you'll need an RCA-to-male minijack adapter)
- stainless steel mounting hardware included
- frequency response: 20-250 Hz
- variable low-pass crossover: 50-200 Hz
- variable bass boost: 0-12 dB at 45 Hz
- dimensions 14-3/4"W x 12-3/4"H x 11-1/2"D
- weight: 22.4 pounds
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # STEALTH AS-10
What's in the box:
- Powered sub with grille installed (attached 5' power/signal cable)
- Wired remote level control (attached 16' cable)
- Two 30A fuses (one installed)
- 6 Large phillips-head screws
- 2 Small phillips-head screws
- 6 Large washers
- 2 Small washers
- Installation/Owner's Manual
- "Break-In Procedure" note
Wet Sounds Stealth AS-10 reviews
Thanks for submitting your review
More details on the Wet Sounds Stealth AS-10
Stealth Series Powered Sub: The Wet Sounds Stealth AS-10 is powered subwoofer designed for Side-by-Side's, ATV's, golf carts, and boats. It is a high performance 2-wire, 12-volt audio system for your recreational vehicle.
10" High Excursion Woofer: The Wet Sounds Stealth series powered sub features a 10" high excursion woofer with a polypropylene cone and rubber surround for deep bass performance.
500W Class D Amplifier: The powered subwoofer's 500W Class D amplifier is sealed against moisture and dirt for extra protection and power.
Rugged Enclosure: The powered sub's tough and durable molded Polyethylene enclosure is designed to handle the harsh environment while providing superior sound. A durable aluminum grille is used to protect the woofer and match Wet Sounds' Stealth series soundbars.
Rear-Panel Controls: The Stealth series powered subwoofer is equipped with a gain control (min/max), variable low pass crossover (50-200Hz), variable bass boost (0-12dB @ 45Hz), and phase switch (0°/180°). These controls are located on the rear-panel of the powered subwoofer behind a clear plastic panel which must be removed by unscrewing six hex-head screws.
Wired Remote Level Control: The Wet Sounds Stealth AS-10 comes with a wired remote control to fine-tune the volume level of the powered sub with the rest of your system. The wired remote control features an integrated mounting bracket designed to mount under the dash or other flat surface. An attached 16' cable runs from the wired remote's mounting location to the powered sub's mounting location.
Minijack Input: The Wet Sounds Stealth AS-10's audio input consists of a male 3.5mm minijack connector that is attached to the powered sub via a 5' cable. This male 3.5mm minijack connector plugs to the female 3.5mm line output jack of your Wet Sounds soundbar or other amplified soundbar speaker's analog output.
Auto Turn-On: The powered subwoofer's remote turn-on wire connects to the remote output on the Wet Sounds Stealth series soundbars. If you have a soundbar without a remote turn-on, the powered sub has auto sensing as well to turn on automatically.
Power/Ground Harness: The powered sub features an attached 5' power/ground harness which will need to be hardwired to your recreational vehicle's electrical system. The power (red) and ground (black) leads both have ring terminals attached. The Power wire also features an inline 30A fuse. In addition, there is a remote turn-on wire (blue).
Mounting Hardware: The Wet Sounds Stealth AS-10 comes with stainless steel mounting hardware.
Placement Options: The physics of sound tell us that any subwoofer increases its output when allowed to "load" into a wall, corner, or some other structure. Since every vehicle & application is different, we suggest you experiment & move the subwoofer around to find the optimal position.
Break-In Period: It is recommended that the AS-10 be played at moderate volume levels using normal music material for 6-8 hours before high-output demands are placed on the powered sub. Proper break-in will result in better sound and longer life of the product.
4 questions already asked