About the Wet Sounds XS-808-S
Versatile mounting options
Versatile mounting options
Wet Sounds' 808 Series speakers give you powerful sound and remarkable versatility. Designed for larger boats with plenty of space for speakers, this convertible component speaker system lets you choose the best spot on your boat for its 1" titanium dome tweeters. You can mount the tweeter in the center of the 8" speaker's UV-resistant grille, or go for the classic component installation by using the included flush- or surface-mount cups. Either way, you'll get terrific sound and outstanding details, thanks to the crossover network that's integrated into the woofer's frame.
Ready for fun in the sun
Like all Wet Sounds gear, 808 Series speakers are designed to survive and thrive on the water. The woofer's frame and grille are made from Nylas, a seriously rugged nylon/fiberglass blend that can take the pounding of a long day of wake-hopping. Each speaker features a rubber spider, surround, and magnet boot for long-lasting water resistance you can count on when the weather gets rough or the spray gets high.
- convertible marine component system (two woofers, two tweeters)
- 8" composite woofer cone with durable rubber surround
- 1" titanium dome tweeter can be mounted separately or coaxial style
- rugged Nylas™ (nylon/fiberglass) frame with integrated crossover network
- durable rubber spider and magnet boot
- handles up to 125 watts RMS (250 watts peak)
- frequency response: 35-22,000 Hz
- sensitivity: 92 dB
- impedance: 4 ohms
- woofer top-mount depth: 3-11/16"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # XS-808-S
What's in the box:
- Two 2-way marine speakers (with removable tweeters installed)
- 2 Flush mount tweeter cups
- 2 Flush mount clips
- 2 Surface mount tweeter cups
- 2 Center grilles (replace the tweeters when removed from the woofer grille)
- Two 32" Tweeter wire extensions
- Twelve 1-1/4" Stainless steel screws
- Six 3/8" Flat-head screws
- 2 Cardboard templates
- Owner's manual
Wet Sounds XS-808-S reviews
Thanks for submitting your review
More details on the Wet Sounds XS-808-S
Features & specs
|Tweeter Design||1" Dome|
|Woofer Composition||Polypropylene Composite|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
92 dB at 1 watt |
|Frequency Response||35 - 22k Hz|
|Max RMS Power Handling||125|
|Peak Power Handling (Watts)||250|
|Top-mount Depth (Inches)||3 11/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||7 5/16|
Overview: The Wet Sounds XS-808-S marine speaker is a convertible component speaker system. The speaker has an 8" cone woofer and a 1" titanium tweeter that can be mounted coaxially, or removed and mounted as a separate component.
Nylas Frame/Grille: The speaker frames and grills are made of a composite mix of Nylon and fiberglass called Nylas, that improves the strength and durability of the speaker in the marine environment.
Tweeter: Each speaker has a 1" titanium tweeter mounted in a sealed chassis. It has a attached 6" speaker wire with a 2-pin plug. Out of the box, the tweeter is mounted coaxially to the center of the woofer grille. The tweeter is protected by its own mesh grille.
Convertibility: The tweeter can be removed from the woofer's grille and mounted separately as a component tweeter. The woofer grille is held in place by three screws under the rubber gasket, and must be removed to unplug the tweeter from the internal wiring. Flush-mount and surface mount cups are provided for mounting the tweeter. A 32" extension wire plugs into the tweeter's 6" pigtail to allow you to separate the tweeter from the woofer.
Mounting Specifications: When the tweeter is mounted separately, the mounting dimensions are as follows:
|Frame Diameter||Cutout Diameter||Mounting Height||Mounting Depth|
|Surface Mount||2.47"||N/A||1.23"||0.33" |
Q Crutchfield asked: Why did you buy this?
1 question already asked