About the Flexson Wall-mount Bracket
Keep it tidy
The Flexson Wall Mount lets you find a discreet spot to tuck away your Sonos Amp. You can hang it on the wall or even attach it to the back of compatible TV mounts. It comes with an attachable cable cover that's color-matched to the Amp to keep everything looking neat.
- wall-mount bracket for your Sonos Amp
- durable steel construction
- works on a variety of wall surfaces
- attach to rear of a TV using VESA mounts
- cable cover with knock-outs for a clean look
- Sonos Amp and cable cover can be inverted
- 8-1/2"W x 11-3/8"H x 2-3/4"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # AAV-FLXSAWM1021
What's in the box:
- Mounting bracket
- Plastic cover
- Two M4x12mm screws
- Two M5x12mm screws
- M6x12mm Screw
- M8x12mm Screw
- M5x16mm screw
- Rectangular washer
- Metal bobbin
- Installation Instructions
- Flexson brochure
More details on the Flexson Wall-mount Bracket
Mounting Bracket for Sonos Amp: The Flexson SA-WM bracket allows you to mount the Sonos Amp (sold separately) on the wall or to the back of your table-top mounted TV. Once the Flexson SA-WM bracket is mounted to your wall or TV, the Sonos Amp mounts to the SA-WM bracket's keyhole slot using the included M5 screw and metal bobbin. The M5 screw attaches the metal bobbin to the threaded insert on the bottom of the Sonos Amp; the metal bobbin then secures the Sonos Amp to the keyhole slot of the SA-WM bracket.
Wall-Mount Installation: The Flexson SA-WM bracket lets you mount the Sonos Amp to your wall using four wood or drywall screws (not included). If you are not mounting the SA-WM bracket to a wood-stud, make sure to use drywall anchors (not included). Screws and drywall anchors are not included and available at most local hardware stores.
TV-Mount Installation: The Flexson SA-WM bracket can also be used to mount the Sonos Amp to the back of your table-top mounted TV. The bracket mounts to the threaded inserts found on back of your TV using the included hardware (M4, M5, M6, and M8 screws are included). The bracket will mount to a VESA 75 or 100 pattern on the back of your TV using two included M4 or M5 screws. It will also mount to a VESA 200, 300, 400, or 600 pattern on the back of your TV using only one M6 or M8 screw and a metal rectangular washer (all included).
Note: The Flexson SA-WM bracket is not designed to be utilized with a wall-mount bracket and wall-mounted TV.
Steel Construction: The Flexson SA-WM bracket features high-quality steel construction with a black finish.
Plastic Cover: Once the Flexson SA-WM bracket and your Sonos amplifier are mounted and installed, the included black plastic cover clips onto the mounting bracket, hiding wire and cable connections of the Sonos Amp for a clean and neat looking installation.