About the Brax Matrix M2CPP
Made in Germany
Made in Germany
Brax strives to build car audio equipment that provides an absolutely first-class listening experience, and their Matrix line embodies that goal. They hand-assemble every product in Germany using the highest quality parts to give you the best performance possible. If you're looking to build a reference-level system in your vehicle, Brax audio components will put you right smack in the middle of your favorite musical performances.
Smooth high frequencies
Brax thought a little outside the box when they created their Matrix M2CPP 6-3/4" component system. The tweeter's built from resin-infused silk and coated in black Acronal, so you'll hear smooth, accurate high-frequency response without any piercing peaks. Brax anchors each tweeter in a robust two-piece stainless-steel housing that can dissipate heat much more efficiently than more conventional designs. A powerful Neodymium magnet drives the tweeter efficiently so it can keep up with the most intense musical tracks. You'll feel like a window's been opened on all the details in your music, as voices and instruments sounds much more realistic and natural.
Detailed, punchy bass
Never afraid to use unusual materials in the quest for better sound, Brax built the woofer cone from Agave Sisalana, an incredibly tough natural fiber. They treat the fiber with aluminum oxide to make a rigid, lightweight cone that delivers clean, punchy bass. A rubber surround and durable spider connect the woofer to a cast-aluminum basket, while a stainless steel phase plug helps to improve dispersion and cool the large hand-wound voice-coil. This beast of a 6-3/4" woofer handles up to 120 watts of RMS power.
To eliminate peaks and drops in response, a massive crossover network ensures that the correct frequencies get to the right speakers, using superior components to guarantee high stability with no coloration. It even includes five levels of tweeter attenuation so you can tune the system to your vehicle's acoustics and your taste.
Note: Brax describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
- component speaker system includes two 6-3/4" woofers, two tweeters, and two external crossovers
- aluminum-impregnated Agave sisalana woofer cone
- rubber surround
- 2" resin-infused silk dome tweeter
- 2-way external crossover with 5-way tweeter adjustment
- 4-ohm impedance
- power range: 10-120 watts RMS (170 watts peak power)
- frequency response: 35-30,000 Hz
- sensitivity: 88.9 dB
- woofer top-mount depth: 2-9/16"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # M2CPP
What's in the box:
Thanks for submitting your review
More details on the Brax Matrix M2CPP
Features & specs
|Tweeter Design||2" Dome|
|Tweeter Composition||Resin infused Silk|
|Woofer Composition||Aluninum/Agave Sisalana|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||88.9|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||35 - 30k Hz|
|Minimum RMS Wattage||10|
|Maximum RMS Wattage||120|
|Peak Power Handling (Watts)||170|
|Top-mount Depth (Inches)||2 9/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 11/16|
|Mounting Height (Inches)||0.354|
- Depth: 64mm (2.52")
- Mounting Height: 9mm (0.354")
- Cutout Diameter: 143mm (5.63")
- Magnet Diameter: 96mm (3.78")
- Frame Diameter: 167mm (6.575")
- Revc: 3.4Ω
- Vas: 12.59 liters
- Qts: 0.59
- Fs: 49 Hz
- Depth: 25mm (0.98")
- Mounting Height: 16mm (0.63")
- Flange Height: 7mm (0.28")
- Cutout Diameter: 50mm (1.97")
- Frame Diameter: 60mm (2.36")
- Revc: 3.4Ω
- Fs: 750 Hz
- Crossover Point: 2,600 Hz
- Impedance: 4Ω/2Ω; change to 2Ω if adding a second woofer (optional)
- Tweeter Output Level: -3dB, -1.5dB, 0dB, +1.5dB, or +3dB (relative to the woofer output level)
- Length: 144mm (5.67")
- Height: 56mm (2.20")
- Width: 170mm(6.69")
Woofer Size Classification Note: Crutchfield has traditionally referred to this woofer size as a 6-3/4", while some manufacturers, including Brax (Audiotec Fischer), call it a 6-1/2". Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.