About the WyreStorm HDBaseT™ RX-70-4K
Receive a 4K video signal without a long HDMI cable
Receive a 4K video signal without a long HDMI cable
This WyreStorm HDBaseT receiver accepts an incoming HD or 4K Ultra HD video signal from a compatible WyreStorm matrix, transmitter, or presentation switcher. It converts its Ethernet input to an HDMI output, so you can position it near your TV or monitor and use a short HDMI cable for connection.
This receiver supports both HDCP 2.2 and HDR-encoded content, making it ideal for providing a high-quality signal to a 4K projector or wall-mounted TV.
Personalized system-building advice
We carry a full selection of audio/video distribution products for residential and commercial installations. And we're happy to help you choose the right gear. For expert advice and a free system proposal, submit a design request using the form below. We'll make sure you have everything you need to get your new system up and running smoothly.
Get a free system design
- Ethernet-to-HDMI audio/video signal receiver (requires compatible transmitter for operation)
- receives audio and video over long distances through CAT-6 Ethernet cable
- supports 1080p video transmission up to 100 meters/328 ft.
- supports 4K Ultra HD video transmission up to 70 meters/230 ft.
- HDCP 2.2 compliant
- supports HDR- and 3D-encoded content
- HDBaseT 5Play feature set, which supports 4K video, multi-channel audio, 2-way IR and RS-232 control, PoH (power over HDBaseT), and Ethernet pass-through
- PoH support for flexible installation options
- receiver draws power from matrix so no local power supply is required at the display location
- supports multi-channel audio formats, including Dolby Atmos® and DTS:X™
- supports stereo PCM audio signals
- bi-directional IR pass-through for relaying remote control commands
- RS-232 control when connected to a compatible HDBaseT transmission device with routable RS-232 capability
- LED indicators for power, signal status, and more
- use multiple receivers to send the same signal to up to 7 displays
- mounting brackets included
- slim, low-profile chassis
- 9-3/16"W x 3/4"H x 3-11/16"D
- weight: 1.1 lbs.
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # RX-70-4K
What's in the box:
- HDBaseT POH display receiver
- IR emitter
- IR receiver
- Phoenix-connector (3-pin)
- Phoenix-connector (2-pin)
- 2 Brackets
- 2 Screws
- Two-sided tape
- Quickstart Guide
Thanks for submitting your review
More details on the WyreStorm HDBaseT™ RX-70-4K
Class A HDBaseT Technology w/ 5Play Compliance: The WyreStormRX-70-4K Display Receiver brings 5Play compliance to long distance 4K HDBaseT distribution. Designed to be used as part of a WyreStorm HDBaseT in-wall transmission extender solution or PoH-enabled matrix switcher integration, the RX-70-4K receiver features powerful Class A HDBaseT technology and a full 5Play feature set including 4K HDR video up to 230' or 1080p/60Hz up to 328', HD multichannel audio, bidirectional control via IR and RS-232, Ethernet pass-through and PoH power to display zones all along a single Cat6 cable.
Note: Although the RX-70-4K has been tested with Cat5e, WyreStorm recommends Cat6 due to increased bandwidth and improved capacity for handling large transmissions along a single cable.
PoH (Power-over-HDBaseT): PoH (Power-over-HDBaseT) enables power to be passed along the cable along with transmissions from a POH-enabled transmission device to power receivers at display zones without the need for local mains power for greater flexibility and convenience during installation, as well as improved energy efficiency compared to a permanent mains connection.
Note: If local power is required, the RX-70-4K offers additional 12v power connectivity via threaded bushings for both standard or locking DC power plugs and phoenix connector.
Supported Video Resolutions: The WyreStorm RX-70-4K is HDCP 2.2 compliant and supports Ultra HD 4K video transmissions up to 230' and HD 1080p video transmissions up to 328'. It is also BT.2020 (wide color gamut) and HDR (high dynamic range) compatible. In addition it is 3D video compatible (up to 1080p) with frame packing/sequential (Blu-ray) and interlaced stereoscopic (satellite/cable broadcasts).
- Input Resolutions via Cat6: 1920x1080p @60Hz 36-bit (328') / 48-bit (230'), 3840x2160p @30Hz 4:4:4 24-bit (230') / @24Hz 4:2:0 HDR 10-bit (230'), 4096x2160p @60Hz 4:2:0 24-bit (230')
- Output Resolutions via HDMI: 1920x1080p @60Hz 36-bit (50') / 48-bit (23'), 3840x2160p @30Hz 4:4:4 24-bit (23') / @24Hz 4:2:0 HDR 10-bit (9.8'), 4096x2160p @60Hz 24-bit 4:2:0 or 4:4:4 (23')
Note: A WyreStorm EXP-CON-4K-DD scaler (sold separately) may be required for installations combining both combined 4K and 1080p HD equipment.
Supported Audio Formats: The WyreStorm RX-70-4K Display Receiver supports 2ch PCM and multichannel audio (including DTS Master HD, Dolby TrueHD, Dolby Atmos, and DTS:X).
HDMI 2.0 Output: The WyreStorm RX-70-4K is outfitted with a HDMI 2.0 output that is HDCP 2.2 compliant. The HDMI 2.0 output supports Ultra HD 4K/HDR (High Dynamic Range) video. Use a premium high-speed 18Gbps HDMI cable (no longer than 23') for the best 4K/HDR performance.
Ethernet Pass-Through: The WyreStorm RX-70-4K features an Ethernet (RJ-45) Pass-Through port for connection of a network enabled display.
2-Way IR Control: The WyreStorm RX-70-4K Display Receiver transmits discrete wide-band 2-way IR control signals together within the HDMI signal over a single Cat5e/6 cable run.
- For two-way IR control of connected source and display, connect IR TX emitters from IR TX port of the transmission device and receiver to the IR receiving area of the source on the display. Care should be taken to firmly attach emitters directly over the infrared receiving area of devices. Location of the emitter eye may need to be adjusted later to achieve best IR performance.
- For use with a control system, an IR Link cable (sold separately) should be connected from the transmission device IR RX port to the controller used. An IR receiver should be connected from the IR RX port of the RX-70-4K to the display, placing the receiver eye on or near the display in clear line of sight to the remote handset used to control
RS-232 Port: A 3-pin, RS-232 port provides 3rd party remote control and is used for firmware updates. For an RS-232-based control system, an RS-232 cable should be connected from the transmission device to control system and between the RX-70-4K and display to enable serial control between devices. Serial control at display end requires a compatible model WyreStorm matrix featuring compatible HDBaseT transmission device with routable RS-232.
LED Status Indicators: Signal and device activity is indicated by panel LEDs for power supply, signal status for established display connection, Link for confirmed HDBaseT connection between matrix/receiver and HDCP presence in signal - all giving instant visual confirmation of operational status and helping to identify potential issues.
Mounting Options: The WyreStorm RX-70-4K Display Receiver has a low-profile chassis that is capable of placement behind even the slimmest TV and display wall-mounts.