About the Monitor Audio Gold 100
The new gold standard for speaker performance
The Monitor Audio Gold 100 is an attractive, highly accurate bookshelf speaker.
The new gold standard for speaker performance
I've been in the audio gear business most of my life, so it takes a lot to impress me. But when I took home a pair of Monitor Audio's previous generation Gold GX100 bookshelf speakers for a quick weekend audition, they simply blew me away. That weekend turned into a three month music and movie marathon. (I just couldn't make myself bring them back. Sorry.) They delivered so much of what I value in a speaker — speed, transparency, low-level detail, 3D imaging, and a deep, wide soundstage that extends way outside the physical boundaries of the speaker. In other words, all the things that make recorded music seem so real you can almost reach out and touch it.
Now Monitor has introduced the Gold 100, a bookshelf model that replaces the GX100s that I admired so much. The Gold 100 builds upon the GX100's already impressive design by adding refinements that enhance performance, while retaining all of the goodness that made those speakers so exceptional. I can't wait to take these babies home for a weekend (or three).
Continuing advancements in driver design for even better sound
Refined ribbon tweeters
For their latest Gold series speakers, Monitor Audio again relies on their acclaimed ribbon transducers. Made from ultra-thin layers of a ceramic-coated aluminum/magnesium alloy developed by the aerospace industry for jet engines, these ultra low-mass ribbons effortlessly deliver extended high-frequency response out to 60,000 Hz. To increase performance even further, Monitor has tightened manufacturing tolerances to allow these capable drivers to offer consistently more open and transparent sound. Greater production uniformity also means closer matching of tweeter pairs in a stereo system, providing enhanced imaging and a greater sense of detail.
Newly designed woofer cones
The speaker's tight, responsive bass and dynamic midrange come courtesy of Monitor's 6-1/2" C-CAM woofers with RST® (Rigid Surface Technology). Created from the same lightweight alloy as the tweeters, these drivers are strengthened and stiffened even further using a dimpled RST cone surface. The cone also takes the form of a continuous radiating dish, eliminating the central voice-coil opening and dust cap to allow a longer voice coil and larger motor to sit behind the cone. This more efficient assembly provides greater drive force, longer excursions, and lower distortion, for cleaner, more extended and accurate bass definition.
Side-by-side listening tests at Monitor Audio comparing previous models demonstrate that the new Gold models sound more open and dynamic, with a soundstage that is both taller and wider than the previous model.
Attention to detail, inside and out
Wired for transparent sound
Meticulous engineering and hours of focused listening go into each Gold series speaker. The Gold 100's woofer and tweeter are connected to an equally sophisticated crossover network made with audiophile-grade components. Monitor also chose their Pureflow® Silver cabling to make all internal connections. Together, these refinements give you a smoother, flatter frequency response, more powerful dynamics, and faster transients, for sound with real presence and immediacy.
Meticulous, vault-like cabinet construction
Instead of conventional mounting screws, each driver is held in place using a single tensioned rod, or through-bolt, that threads into its back plate, then secures to the back of the cabinet. The bolt not only acts as a rigid cabinet brace to reduce box coloration, it also eliminates the need for traditional driver mounting hardware, effectively decoupling the driver and front baffle to eliminate another source of unwanted resonance.
Monitor Audio speakers have long been known for their sturdy, vault-like cabinet construction. The Gold 100's well-damped, cross-braced enclosure features a curved profile with large-radius edges. This design helps further increase cabinet rigidity while reducing both external diffraction and internal standing waves that can color sound and reduce accuracy.
Gorgeous, furniture-grade finishes
The speaker's exterior comes clad in a mirror-like black piano lacquer or real walnut veneer finish. Eleven layers of lacquer are built-up individually to achieve a luxuriously deep finish. Once assembled the real-wood cabinets are hand finished to ensure absolute precision in the joinery and in the grain matching between each pair. Monitor tops off each speaker with an attractive "floating" magnetic cloth grille that features invisible attachments to give the Gold 100s a clean, classic look whether you use them with the grilles on or off.
- frequency response: 42-60,000 Hz
- sensitivity: 88 dB
- impedance: 8 ohms
- recommended amplifier power: 60-120 watts
- ultra-rigid, lightweight C-CAM® (Ceramic-Coated Aluminum/Magnesium) cone material provides high efficiency and low distortion
- close-tolerance C-CAM ribbon high-frequency transducer for detailed sound, enhanced imaging, and extended high-frequency response
- 6-1/2" C-CAM woofer with latest-generation RST® (Rigid Surface Technology) to enhance stiffness and reduce mass for greater speed and accuracy
- heavily braced, curved cabinets for increased rigidity and reduced internal standing waves
- single bolt-through driver attachment provides mechanical decoupling and increased cabinet rigidity for greater clarity and resolution
- bass-reflex (ported) design with HiVe® II technology for reduced port turbulence and higher velocity airflow
- high-quality crossovers with premium-grade polypropylene film capacitors for greater accuracy
- dual gold-plated five-way binding post speaker terminals with bi-amp/bi-wire capability
- speakers wired internally with specialized Pureflow® Silver cable
- optional dedicated Monitor Audio speaker stands for enhanced performance
- 8-1/4"W x 14-3/8"H x 11-15/16"D
- weight: 21.75 lbs. (each)
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # GOLD100PE
What's in the box:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 8 Rubber feet
- 2 Foam port plugs
- Owner's Manual
- Important Safety Instructions
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
Monitor Audio Gold 100 reviews
Thanks for submitting your review
More details on the Monitor Audio Gold 100
Features & specs
|Tweeter Size (inches)||---|
|Midrange Size (inches)||N/A|
|Woofer Size (inches)||6.5|
|Frequency Response||42-60k Hz|
|Mounting Bracket Included||No|
|Recommended Stand Height (inches)||24-28|
|Parts Warranty||5 Years|
|Labor Warranty||5 Years|
Two-Way Speaker Design: The Monitor Audio Gold series 100 bookshelf loudspeaker employs a two-way driver design with a single C-CAM ribbon tweeter and one 6.5" C-CAM/RST midrange/midbass woofer. The midrange/midbass driver exhibits the low frequency extension and power handling of a much larger driver, while the C-CAM ribbon tweeter produces high frequencies (up to 60kHz) well beyond conventional domed tweeters. The G100's two-way speaker configuration renders your music and movie soundtracks with tonal accuracy and perfect timing.
C-CAM Technology: C-CAM driver technology is used throughout the Gold series 100 bookshelf loudspeaker, providing coherent tonal balance and sonic signature across the entering audio frequency spectrum.
- C-CAM Ribbon Tweeter: Monitor Audio's proprietary ribbon tweeter design uses an ultra-thin sandwich of C-CAM alloy suspended in a powerful transverse magnetic field of high energy NeFeB rare earth magnets. The ribbon serves as both voice coil and radiating diaphragm, with every part of the ribbon driven directly and simultaneously without energy storage. Having a mass of just 18mg, its diaphragm is able to start and stop in an instant, producing a transient response capable of defining the leading edge and natural harmonic resonance of complex musical sounds. Specified to reach ultra-high frequencies, this ribbon tweeter will reproduce with ease every last nuance and detail from vinyl, CD, DVD Audio, and SACD, together with the wider bandwidth of Blu-ray or high resolution digital audio.
- C-CAM Cone Woofer: Ceramic-Coated Aluminum/Magnesium is a material originally developed by the aerospace industry for jet engine components. Its properties are ideal for loudspeaker cones being extremely rigid, yet light enough to yield high overall efficiency. In manufacture, aluminum/magnesium alloy undergoes a three-stage stress-relieving process to remove surface deformation and molecular weakness. Once formed, the alloy cone is subjected to a high temperature anodic coating process in which a layer of pure ceramic alumina is depleted onto its surfaces to a depth of 100 microns, producing a completely rigid sandwich of alloy and heat-dissipating ceramic material. Conventional cones are liable to flex or twist in operation, producing a significant level of audible distortion. C-CAM cones have a much higher resistance to bending stress and therefore exhibit much greater fidelity over their entire operating range.
RST (Rigid Surface Technology): The Gold series bookshelf speaker combines Rigid Surface Technology (RST) with its C-CAM cone woofer design for a stronger, lighter weight cone. The Rigid Surface Technology (RST) cone profile was inspired by the Japanese art of Origami, which demonstrates how a very light material (like paper) can be strengthened and made more rigid by making small and precise folds on it surface. Developed and perfect using sophisticated computer modeling (Finite Element Analysis), the Silver series midbass drivers have been strengthened by a pattern of dimples. RST significantly increases cone rigidity, allowing the radiating surfaces to resist mechanical bending forces, which can twist the shape of conventional driver cones to produce distorted sound. The strengthening effect of RST means that Monitor Audio can use thinner, lighter and more responsive C-CM cones which provide speed and accuracy while offering greatly reduced distortion. The RST patterns also help to displace standing waves that can propagate on the cone's surface.
Single Through-Bolt Mount: The tweeter and woofer are fixed to the cabinet with single through-bolt driver fixing mounts. This single-through-bolt mount design provides mechanical de-coupling and enhanced midband clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet.
MDF Curved Enclosure w/ Magnetic Grille: The G100 employs a MDF enclosure for accurate, uncolored sound. Rigid 20mm MDF construction is used throughout the enclosure with radial and cross-bracing techniques for high rigidity and low cabinet coloration. In addition, the curved cabinet profile aids in increased rigidity and reduced internal standing waves. In addition, the bookshelf speaker comes with a magnetic grille.
HiVe II Bass Reflex Port: The G100 uses a bass reflex cabinet (rear firing port) with Monitor Audio's HiVe II port design for greater efficiency and bigger bass response from a slim bookshelf speaker. The HiVe II bass reflex port is shaped to have the same effect on airflow as a gun-barrel on a bullet. Rifled grooves inside the port help to accelerate the flow and reduce turbulence, so air moves in and out of the port more efficiently, for a faster more dynamic bass response.
Note: If the bass is too boomy, you can insert the included foam port plug into the speaker's rear-firing port to tighten and lessen the bass.
High Quality Crossover & Wiring: The G100 uses a high quality crossover with premium grade polypropylene film capacitors. The speaker also utilizes "Pureflow" silver plated OFC copper internal cabling.
Dual Gold-Plated Binding Posts: The bookshelf loudspeaker has two sets of gold-plated binding posts connected by wire-jumpers. The gold-plated binding posts will accept bare wire (up to 10AWG), pin connectors, & banana plugs (single only). Using the dual posts, you can bi-wire or bi-amp the speaker. Bi-wiring or bi-amping the speaker provides improved bass & treble performance. If you decide to bi-wire or bi-amp, you must remove the jumpers between the terminal posts (failure to do this could result in damage to your amplifier and loudspeakers).
- Bi-Wiring: Bi-wiring can provide noticeable improvements in the overall transparency of your loudspeakers. Run separate speaker wires to the low & high frequency drivers from a single amplifier (the upper set of binding posts are for the high frequency drivers; the lower set of binding posts are for the low frequency drivers).
- Bi-Amping: Bi-amping allows you to use separate amplifiers for the high & low frequency sections of your loudspeaker for greater dynamic range & lower distortion. We recommend that your separate amplifiers have identical gain to preserve the speaker's voicing balance.
Mounting Options: The Gold series bookshelf loudspeaker comes with self-adhesive rubber feet to help secure it in place to prevent slippage and vibration. The optional PinPoint heavy duty side-grip wall-mounting bracket (121AM41B, sold separately) can be used to wall mount the speaker.
Q Crutchfield asked: Why did you buy this?
1 question already asked