About the Audiofrog G12D4
A new name in bass
A new name in bass
Audiofrog brings you powerful, versatile subs that are designed to handle today's high-powered amplifiers. Their G Series subs feature a treated paper cone with a rubber surround for long life and high performance, housed in a stamped steel, vented basket for rigidity and durability. Audiofrog's designers focused on creating a tough, reliable sub by building extra venting into the basket to help cool the voice coils. The pole piece and back plate are also polished and extended to achieve magnetic symmetry above and below the gap. Translation? You'll hear less distortion when you're turning up the bass.
600 watts power handling
The G12D4 12" subwoofer handles up to 600 watts RMS, while the two 4-ohm voice coils give you the option of running it at 8 ohms for multi-sub setups or at 2 ohms to maximize your amp's power output. And Audiofrog designed this sub to be equally comfortable in a sealed or a ported enclosure. If you're looking for performance, get acquainted with Audiofrog.
- 12" dual 4-ohm component subwoofer
- treated paper cone with rubber surround
- handles up to 600 watts RMS (750 watts peak)
- frequency response: 22-160 Hz
- sensitivity: 91 dB
- top-mount depth: 6-9/16"
- sealed box volume: 0.75-1.25 cubic feet
- ported box volume: 1.35-2.5 cubic feet
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # G12D4
What's in the box:
- One 12" Dual 4-ohm voice coil subwoofer
- Instruction manual
Audiofrog G12D4 reviews
Thanks for submitting your review
More details on the Audiofrog G12D4
Features & specs
|Impedance||2 ohms or 8 ohms|
|Cone Material||Treated Paper|
|Ideal Sealed Box Volume (cubic feet)||1.02|
|Ideal Ported Box Volume (cubic feet)||1.5|
|Port diameter (inches)||4|
|Port length (inches)||16|
|Dual Voice Coil||Yes|
91 dB at 2.83 volts |
|Frequency Response||22 - 160 Hz|
|Max RMS Power Handling||600|
|Peak Power Handling (Watts)||750|
|Top Mount Depth (inches)||6 9/16|
|Bottom Mount Depth (inches)||7 3/16|
|Cutout Diameter or Length (inches)||11 1/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual Voice Coils: This woofer features two 4Ω voice coils, allowing impedance flexibility. When the voice coils are wired in parallel, the woofer presents a 2Ω load. When the voice coils are wired in series, the woofer presents an 8Ω load.
Binding Posts: The binding post wire terminals will accept pin connectors, spade lugs, single banana plugs, and bare wire up to 8-gauge. The binding posts are spaced too far apart to accept standard dual banana plugs (3/4").
Sealed Box Volume: The recommended sealed box volume range is from 0.75 ft³ to 1.25 ft³, with 1.02 ft³ being the ideal size. A sealed enclosure design gives the smoothest response with increased energy at the lowest frequencies.
Ported Box Volume: The recommended ported box volume range is from 1.35 ft³ to 2.5 ft³. The ideal size is 1.5 ft³, for which both slot and tube style port measurements are given; both result in a tuning frequency of 33 Hz:
- Slot: 12.5" x 1.5" opening, 22" long
- Tube: 4" diameter x 16" long
Power Handling: Audiofrog lists two RMS power figures in the manual; 250 watts RMS in the technical specifications section and 100-600 watts RMS in the recommendations section. We've listed the recommended range in the specs table.
Q Crutchfield asked: Why did you buy this?