About the Audiofrog G60S
Audiofrog quality in factory locations
Audiofrog quality in factory locations
Audiofrog made a name for themselves as a favorite among serious installers and car audio connoisseurs for their adaptable, top-performing speakers and crossovers. This G-Series G60S 6" component speaker system delivers high-fidelity audio you expect in a factory location-friendly package. Audiofrog includes woofer adapters for a variety of speaker openings as well as their very special tweeter mounting kit for flush- and surface-mounting. Small, high-quality inline crossovers for the woofers and tweeters also make installation much simpler.
Well reknowned sound
A responsive polypropylene cone provides high internal damping for smoother frequency response, and Audiofrog uses a 1" copper voice coil to enhance power handling. Audiofrog designed their fabric dome tweeter to deliver the high-frequency details in a well-powered, component system. Designed for superior accuracy, the expansive 1" fabric dome tweeter delivers highs with a natural, silky, smooth quality, eliminating the distortion and ringing created by some metal and plastic domes.
- component speaker system includes 2 woofers and 2 tweeters
- 6" polypropylene woofer with rubber surround
- 1" fabric dome tweeter with inline crossover
- inline crossovers (high-pass at 12 dB per octave, low-pass at 6 dB)
- handles 15 to 50 watts RMS (120 watts peak power)
- frequency range: 50-20,000 Hz
- sensitivity: 89 dB
- woofer mounting depth: 2-1/16"
- impedance: 4 ohms
- grilles not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # G60S
What's in the box:
- Two woofers
- Two tweeters (5" speaker wire attached)
- 2 Flush mount tweeter housings (installed)
- 2 High pass crossover networks
- 2 Low pass crossover networks
- 2 Multi-application woofer adapter brackets
- Eight 1/2" Allen head screws (2.5mm)
- Eight M4x5mm Machine screws
- Eight M2x3mm Machine screws (1.5mm Allen head)
- 2 Star lock washers
- 1.5mm Allen wrench
- 2mm Allen wrench
- 2.5mm Allen head bit
- Owner's manual
Audiofrog G60S reviews
It took me some time to get them installed but was worth it Great sound
0 of 0 found this helpful
Really nice speakers! Went active, didn't use the passive crossover, but very happy with the result. Highs are crisp and detailed and mids are clear. Am now tempted to try the GBs lol..
Pros: Beautiful sound.
Cons: A bit expensive, and had to do some carpentry to get it to fit my stock tweeter location.
3 of 3 found this helpful
these speskers are absolutely phenomenal. matched with my 50watt rms sony deck they reproduce audio with such crystal clear precision that you dont want to leave the car lol. installation was a breeze and the look beautiful mounted to my dash and doors! WORTH EVERY LAST PENNY!
Pros: ease of install, clarity of audio
2 of 3 found this helpful
These are great speakers, surprisingly no one is reviewing them yet, I have these running front and rear, replacing OEM parts for my daughters 2018 Honda Civic EX Hatchback, powered by an Audison AP4.9 bit and a powered sub from JL Audio ACP108LG, kept the factory HU and installed Audiocontrol LCQ1, sound is very transparent and images very nice without being too bright on the tweeters, I'm running them passive for now and see if I could add another amp and go 2 way active front and passive in the rear, The sound coming from these is hard to beat, I get a chuckle every time my brother-in law brings his 2017 BMW X5 and brags about his so called premium factory sound, and hears this on a Civic, hahaha freaking priceless!! Amazing for the price, just make sure you second skin your doors and the trunk to help with the road noise since the Civic is notorious for that, the tires had to be replaced with Bridgestones and rewired everything with Duelund DCA16GA and Stingers for amps. It's all good here..
Pros: value for performance, lies somewhere in the middle but you'll never regret these, dynamics and coherency
14 of 14 found this helpful
More details on the Audiofrog G60S
Features & specs
|Speaker Size||6 1/2|
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||89|
|Frequency Response||50 - 20k Hz|
|Minimum RMS Wattage||15|
|Maximum RMS Wattage||50|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||2 1/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5|
Adapter Rings: The included adapter rings allow installation in numerous factory applications. Without the adapter rings the woofers fit many standard 6 3/4 locations. They will also fit standard 6 1/2 openings, but the bolt pattern is different, so you'd have to drill new screw holes. The adapter rings include standard 6 1/2 and Ford 6 1/2 bolt patterns, as well as specialized 6 3/4 bolt patterns. Please enter your specific vehicle information to confirm fit.
Power Handling: Audiofrog lists two RMS power figures in the manual; 50 watts RMS in the technical specifications section and 15-75 watts RMS in the recommendations section.
Tweeter Mounting: In addition to fitting many factory tweeter applications, flush mounting hardware is included.
|Mounting Depth||Mounting Height||Frame Diameter||Cutout Diameter|
|Flush Mount||0.519" |
(1.140" w/ stud bolt)
Crossovers: Each channel uses separate in-line crossovers for the woofer and tweeter, making them easy to install when the drivers are in different locations. The 12" input wire and 12" output wire are attached to each crossover. The 6 dB/octave low pass crossovers have female quick-slides on the outputs that connect to the woofer terminals. The 12 dB/octave high pass crossovers have harnesses on the outputs that connect to the harnesses on the wire attached to the tweeters. The crossover point for both is 4 kHz.
- Width: 2.325"
- Height: 1.74"
- Depth: 0.84"
1 question already asked