About the Audiofrog GS25
Build an Audiofrog system
Build an Audiofrog system
The price tag sets Audiofrog's speakers apart from the run-of-the-mill, but it also buys you astounding car audio. Audiofrog designed the GS25 2-1/2" midrange speakers to deliver the details in a custom component system. A responsive polypropylene cone provides high internal damping for smoother frequency response, and Audiofrog uses a 1" copper voice coil to enhance power handling.
What a speaker
You can use these versatile speakers with active crossovers (not included) in a 2- or 3-way system, or as standalone center speakers in a multi-channel setup. The beauty of Audiofrog's a la carte approach is that it imposes no limits on your ultimate car audio vision.
Creative installation
Audiofrog was founded by experienced installers, who know all the pitfalls and shortcuts of custom installations. Check out our full lineup of Audiofrog components, and build the system you've always dreamed of.
Highlights:
- 2-1/2" polypropylene speakers (pair)
- for use with active crossovers
- power handling: 15-75 watts RMS (150 watts peak power)
- frequency response: 200-20,000 Hz
- impedance: 4 ohms
- sensitivity: 87 dB
- flush-mount depth: 1-9/16"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # GS25
What's in the box:
- 2 Midrange drivers
- 2 Adhesive backed foam gaskets
- Eight 5/8" Screws
- 8 Adhesive backed rubber bushings
- Instruction manual
Featured review
Even before tuning in the DSP, they sound amazing. Clear voices, clean mids and highs. Using these as widebands (no tweeters) in the dash with GB60 on midbass. Active crossovers (per AudioFrog) are 300hz HP at 24db/octave. Powering via AudioControl D6.1200 with plenty of volume and clarity.
Ryan from ALPHARETTA, GA
Customer Q&A
Q
it states that the price is 229.99 for a pair....my dash only needs one speaker in the center....how do i buy just one?
A
We only sell them in pairs. You would need to purchase the pair even though you only intend to use one.
12 reasons to shop with us
#5
Free instructions & discounted install gear
The stuff you need to do it yourself.
REVIEWS
Customer reviews
Loading reviews...
Audiofrog GS25 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Audiofrog GS25
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 2 1/2 | |
| Design | 1-way | |
| Tweeter Design | --- | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | --- | |
| Woofer Composition | --- | |
| Woofer Surround | Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | N/A | |
| Sensitivity at 2.83 volts | 87 | |
| Frequency Response | 200 - 20k Hz | |
| Minimum RMS Wattage | 15 | |
| Maximum RMS Wattage | 70 | |
| Peak Power Handling (Watts) | 150 | |
| Top-mount Depth (Inches) | 1 9/16 | |
| Bottom-mount Depth (Inches) | 1 11/16 | |
| Cutout Diameter or Length (inches) | 2 3/8 | |
| Mounting Height (Inches) | 0.16 | |
Product Research
Features
Overview: The GS25 is designed as a drop-in upgrade for many GM, Toyota and Mercedes Benz vehicles. The basket has break off mounting tabs so you can remove the ones not used in your installation, or all the tabs can be removed and the speaker mounted as a universal 2½". Please enter your vehicle information to confirm fit.
Crossover: Audiofrog recommends a high pass crossover set no lower than 200 Hz. The minimum recommended slope is 12 dB/octave.
Power Handling: Two RMS power figures are listed in the manual; 70 watts RMS in the technical specifications section and 15-75 watts RMS in the recommendations section.
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...
