About the Audiofrog GS62

Make the leap to better sound

The low profile of the GS62 tweeter makes it a better fit in the factory location of more vehicles.
Make the leap to better sound
If you haven't heard of Audiofrog yet, here's what you need to know – there's no one like them. Drawing on decades of collective experience in the car audio field, the folks at Audiofrog have translated their practical knowledge of what makes great sound into the GS62, a no-nonsense, high-quality coaxial speaker.
Let's start with the 6" woofer — a strong polypropylene cone gives you terrific response, while its parabolic shape and 1" copper voice coil ensure impressive power handling. The GS62's 1" tweeter takes on the high frequencies with gusto thanks to an incredibly resilient soft dome design, while minimal tweeter protrusion allows these speakers to fit in more vehicles. But here's where Audiofrog separates themselves from the pack — this coaxial speaker sports a true 2-way crossover network that's built into the basket to ensure the right frequencies go to the right drivers for a seamless transition between highs and lows.
Road-tested
You'll want to power these speakers with an outboard amp to hear their incredible clarity. The confident sound of the GS62 is built upon a full one hundred of hours of testing and abuse, during which these speakers have to perform under the strain of extreme heat, humidity, and cold. This commitment to quality means that your Audiofrog speakers will deliver beautiful sound in your car for many, many years.
Product highlights:
- 2-way car speakers (pair)
- 6" parabolic polypropylene woofer with rubber surround
- 1" fabric dome tweeter with wave guide faceplate
- built-in 2-way crossover (12dB/octave high-pass, 6dB/octave low-pass)
- power range: 15-75 watts RMS (200 watts peak power)
- frequency range: 50-20,000 Hz
- sensitivity: 89 dB
- top-mount depth: 2-1/16"
- impedance: 4 ohms
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # GS62
What's in the box:
- Two 2-way speakers
- 2 Grilles
- 2 Grille mounting rings
- 2 Multi-application adapter rings
- 8 Adhesive backed gasket strips
- Eight 1-1/8" Screws (3mm Allen head)
- Eight 1/2" Screws (Phillips head)
- Eight M4x12mm Machine screws (3mm Allen head)
- 3mm Allen head bit
- Instruction manual
Reviews
Customer reviews
Loading reviews...
Audiofrog GS62 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Audiofrog GS62

Features & specs
General | ||
---|---|---|
Speaker Size | 6 | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Fabric | |
Woofer Composition | Polypropylene | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 89 | |
Frequency Response | 50 - 20k Hz | |
Minimum RMS Wattage | 15 | |
Maximum RMS Wattage | 70 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 2 1/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 1/16 | |
Mounting Height (Inches) | 0.65 |
Product Research
Features
Tweeter: The 1" polyester fabric dome tweeter uses a neodymium magnet and includes a reflection absorbing and diffusing foam pad to smooth the high frequency output.
Waveguide: The tweeter includes a small waveguide designed to boost the tweeter's low frequencies and ensure a smooth transition to the midrange.
Crossover: Frequency division is controlled by a 12dB/octave high pass filter and 6dB/octave low pass filter. The entire crossover network is mounted to a PC board integrated into the basket, which also secures the terminals.
Power Handling: Audiofrog lists two RMS power figures in the manual; 70 watts RMS in the technical specifications section and 15-75 watts RMS in the recommendations section.
Adapter Rings: The included adapter rings allow installation in numerous factory applications. Without the adapter rings the GS62 fits many standard 6 3/4 locations. They will also fit standard 6 1/2 openings, but the bolt pattern is different, so you'd have to drill new screw holes. The adapter rings include standard 6 1/2 and Ford 6 1/2 bolt patterns, as well as specialized 6 3/4 bolt patterns. Please enter your specific vehicle information to confirm fit.
Loading accessories...
Customer Q&A
3 questions already asked
Loading articles...
I am not an audiophile but i could notice a huge difference between these speakers and my stock subaru speakers. I only changed the front door speakers due to the fact that the oem passenger side speaker blew twice.
Daniel from Hampshire, IL