About the Audiofrog GS682
Make the leap to better sound
The low profile of the GS682 tweeter makes it a better fit in the factory location of more vehicles.
Make the leap to better sound
If you haven't heard of Audiofrog yet, here's what you need to know – there's no one like them. Drawing on decades of collective experience in the car audio field, the folks at Audiofrog have translated their practical knowledge of what makes great sound into the GS682, a no-nonsense, high-quality coaxial speaker.
Let's start with the 6"x8" woofer — a strong polypropylene cone gives you terrific response, while its parabolic shape and 1" copper voice coil ensure impressive power handling. The GS682's 1" tweeter takes on the high frequencies with gusto thanks to an incredibly resilient soft dome design, while minimal tweeter protrusion allows these speakers to fit in more vehicles. But here's where Audiofrog separates themselves from the pack — this coaxial speaker sports a true 2-way crossover network that's built into the basket to ensure the right frequencies go to the right drivers for a seamless transition between highs and lows.
You'll want to power these speakers with an outboard amp to hear their incredible clarity. The confident sound of the GS682 is built upon a full one hundred of hours of testing and abuse, during which these speakers have to perform under the strain of extreme heat, humidity, and cold. This commitment to quality means that your Audiofrog speakers will deliver beautiful sound in your car for many, many years.
Grilles are not included; the factory grilles should be suitable for most applications.
- 2-way car speakers (pair)
- 6"x8" parabolic polypropylene woofer with rubber surround
- 1" fabric dome tweeter with wave guide faceplate
- built-in 2-way crossover (12dB/octave high-pass, 6dB/octave low-pass)
- power range: 15-75 watts RMS (200 watts peak power)
- frequency range: 47-20,000 Hz
- sensitivity: 89 dB
- top-mount depth: 2-5/16"
- impedance: 4 ohms
- grilles not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # GS682
What's in the box:
- Two 2-way speakers
- 2 Bottom mount rings
- Instruction manual
Audiofrog GS682 reviews
I replaced four JBL GX series door speakers that I installed several years ago with these Audiofrog GS682 and the sound is next level like many of the other reviews said! The highs sound very clear and aren't piercing which is something the JBL's didn't handle well. The mid bass is smooth and the level of detail and clarity these speakers offer is like nothing I have ever heard in a 6x8 speaker! You can hear details in the music that weren't noticeable before. I just want to drive around with nowhere to go and listen to music ha!! My current setup in my 2011 F-150 XLT Crew Cab is the Alpine ILX-207 with the Alpine KTP-445A Power Pack and now the Audio Frogs. I would recommend these speakers to anyone looking for greater sound in their vehicle. Crutchfield provided excellent customer service and fast shipping. FYI The female plug on these speakers is larger than normal and Crutchfield included the Metra female quick connectors free with my order. Simply cut the old connection off the female speaker wire and slide on the new quick connector that fits the Audiofrog and crimp and you're done. Thanks again Crutchfield!
Pros: Incredible sound quality, easy to install.
2 of 2 found this helpful
These are the best 6x8 coaxials I've heard, ever. I've run many different components and coaxials over the past 25 years but most would fall short of the AudioFrogs. Highly recommend these to anyone. The actually sound about as good as my JL Audio ZR570 components I've had for years.
Pros: Handle tons of power without falling flat on their face
2 of 2 found this helpful
I can finally hear my radio over my loud F250 Super Duty diesel engine. I can crank these up with out distortion. Excellent!
1 of 1 found this helpful
I was looking for something different so I thought I would try these after some research, and I'm glad I did. I just installed a pair of these 6X8s in the front of a 1999 F350 and they sound incredible! I can turn up the volume all the way and they don't distort at all! I will be buying a second pair for the back.
3 of 3 found this helpful
The Frogs replaced the Pioneer TS-D6802R and I can tell you this is the next level. Pioneers are great speakers for of detail and midbass but get a little sharp on the high notes when cranked. That was with 75 watts per side. Now I have 200 per side on the Frogs and they have even more detail and sound stage but don't rip your ears when pushed. Midbass is stronger and clean at max volume which is something the d series missed and muddied up a bit. If there seems to be something missing in your 6x8 and can't seem to be happy, give these a try! Give them clean power and a good tune I'm sure they will impress you as well.
Pros: Detail Soundstage Fullness
Cons: Not cheap
13 of 13 found this helpful
These speakers sound great I here sounds that I have not herd before on some songs. They take the watts that my amp will give them. Good bass for a small speaker. Have them in all four doors. The kids can't believe an old man can have such a great sounding truck. Thanks LR
11 of 11 found this helpful
More details on the Audiofrog GS682
Features & specs
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||89|
|Frequency Response||47 - 20k Hz|
|Minimum RMS Wattage||15|
|Maximum RMS Wattage||75|
|Peak Power Handling (Watts)||200|
|Top-mount Depth (Inches)||2 5/16|
|Bottom-mount Depth (Inches)||2 15/16|
|Cutout Diameter or Length (inches)||0|
Tweeter: The 1" polyester fabric dome tweeter uses a neodymium magnet and includes a reflection absorbing and diffusing foam pad to smooth the high frequency output.
Waveguide: The tweeter includes a small waveguide designed to boost the tweeter's low frequencies and ensure a smooth transition to the midrange.
Crossover: Frequency division is controlled by a 12dB/octave high pass filter and 6dB/octave low pass filter. The entire crossover network is mounted to a PC board integrated into the basket, which also secures the terminals.
Power Handling: Audiofrog lists two RMS power figures in the manual; 70 watts RMS in the technical specifications section and 15-75 watts RMS in the recommendations section. We've listed the recommended range in the specs table.