About the Audiofrog GS690
Build an Audiofrog system
Build an Audiofrog system
Audiofrog builds speakers for people who are into astounding car audio. When they demo'd GS Series at Crutchfield headquarters, I listened, slackjawed, fantasizing about a world where speakers this powerful and clear were installed in my car. I'd pair them with Audiofrog's GS10 tweeters and the optimized GS610C crossover system, but there's always the option of using active crossovers in a three-way system with GS40 4" midrange drivers. The beauty of Audiofrog's a la carte approach is that it imposes no limits on your ultimate car audio vision.
Team up this 6"x9" midrange driver with an Audiofrog tweeter, and you'll hear a new world of music in your ride.
What a woofer
Audiofrog designed the GS690 6"x9" woofer to deliver the midrange details in a custom component system. A responsive polypropylene cone provides high internal damping for smoother frequency response, and Audiofrog uses a 1" copper voice coil to enhance power handling.
Audiofrog was founded by experienced installers, who know all the pitfalls and shortcuts of custom installations. With the included mounting hardware, you'll find custom fabrication of a speaker location much easier. The GS690's removable ring can be painted or upholstered, depending on your vision for your interior. The grilles are ideal for painting as well.
- 6"x9" polypropylene speakers (pair)
- polypropylene parabolic cone with rubber surround
- for use with GS10 tweeter and GS610C crossover or in systems with active crossovers
- power handling: 15-100 watts RMS (300 watts peak power)
- frequency response: 42-5,000 Hz
- impedance: 4 ohms
- sensitivity: 92 dB
- removable grille mesh and trim ring can be painted
- flush-mount depth: 2-7/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # GS690
What's in the box:
- 2 Midrange drivers
- 2 Bottom mount rings
- Instruction manual
Audiofrog GS690 reviews
Thanks for submitting your review
More details on the Audiofrog GS690
Features & specs
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||92|
|Frequency Response||42 - 5k Hz|
|Minimum RMS Wattage||15|
|Maximum RMS Wattage||100|
|Peak Power Handling (Watts)||300|
|Top-mount Depth (Inches)||2 7/8|
|Bottom-mount Depth (Inches)||3 5/8|
|Cutout Diameter or Length (inches)||0|
|Mounting Height (Inches)||0.476|
Durability: The Nitrile-Butadiene Rubber (NBR) surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Multi Component Systems: The GS690s are designed to mate with the GS10 tweeters (item number 898GS10, sold separately) using the GS610C passive crossovers (item number 898GS610C, sold separately). They can also be used in an active system with (or without) the GS40 midrange (item number 898GS40, sold separately) and the GS10 tweeters using an electronic crossover.
Note: Audiofrog recommends a low pass crossover set no higher than 3.5 kHz. The minimum recommended slope is 12 dB/octave.
Q Crutchfield asked: Why did you buy this?
1 question already asked