About the Audiofrog GS8ND2
Since their introduction, Audiofrog's car speakers have been celebrated for their high quality and superior sound. The GS8ND2 8" speaker gives you the versatility to install it as a subwoofer or as a mid-bass speaker in systems which include a separate sub.
Built for bass
With a fiberglass cone and rubber surround, the GS8ND2 punches out clear, deep bass with minimal distortion, and its solid steel basket keeps the structure steady. Its dual 2-ohm voice coils let you wire the speaker for 1 or 4 ohms, so it'll work with a variety of amplifiers. With up to 250 watts RMS power handling, you'll get plenty of volume to let you really feel the low end. Designed for use in sealed, ported, and infinite baffle applications, this speaker can be used in an enclosure or mounted in your vehicle's interior panels. And with a mounting depth of only 3", it'll work in places a sub won't normally fit.
Audiofrog was founded by car audio installers who saw a need for superior components that could be mixed and matched to create the perfect system for a given vehicle. That's why you should consider Audiofrog's other component speakers and subs for top-flight sound in your ride.
- 8" subwoofer/mid-bass speaker with dual 2-ohm voice coils
- fiberglass cone with rubber surround and steel basket
- can be wired for 1-ohm or 4-ohm impedance
- frequency response: 30-300 Hz
- power handling: 250 watts RMS (500 watts peak)
- sensitivity: 91 dB
- top-mount depth: 3-1/16"
- cutout diameter: 7-1/16"
- sealed box volume: 0.25-0.4 cu. ft.
- ported box volume: 0.5-0.75 cu. ft.
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # GS8ND2
What's in the box:
- One 8" Dual 2-ohm voice coil subwoofer/midbass driver
- Specification sheet
Audiofrog GS8ND2 reviews
Thanks for submitting your review
More details on the Audiofrog GS8ND2
Features & specs
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||91|
|Frequency Response||30 - 0.3k Hz|
|Minimum RMS Wattage||100|
|Maximum RMS Wattage||250|
|Peak Power Handling (Watts)||500|
|Top-mount Depth (Inches)||3 1/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||7 1/8|
|Mounting Height (Inches)||0.445|
Design: Audio frog describes the GS8ND2 as both a subwoofer and a midbass driver.
Dual Voice Coils: This woofer features two 2Ω voice coils, allowing you to use it as a 1Ω load (wired in parallel) or a 4Ω load (wired in series).
Sealed Box Volume: The recommended sealed box volume is 0.25 ft³ (0.25 ft³ to 0.4 ft³ acceptable). A sealed enclosure design gives the smoothest response with increased energy at the lowest frequencies.
Ported Box Volume: The recommended ported box volume is 0.5 ft³ (0.5 ft³ to 0.75 ft³ acceptable), with a 2" diameter x 8⅞" long port; resulting in a tuning frequency of 40 Hz.
Free-Air: The woofer can also be mounted in free air (infinite baffle, no enclosure), so it can be installed in a variety of locations, including factory woofer applications, without the need for a dedicated enclosure.
Power Handling: Audiofrog lists two RMS power figures on the spec sheet; 250 watts RMS in the technical specifications section and 100-400 watts RMS in the recommendations section.
5 questions already asked