About the QSC AD-P.HALO Pendant Speaker
Get a free system design
A musical pendant-mount speaker
Why install multiple speakers when one can do the job? Each QSC AD-P.HALO pendant speaker features a 6-1/2" subwoofer in the center, with four 2-3/4" high frequency transducers surrounding it, so you get full-range sound from a single speaker. They're designed to hang from high ceilings and deliver solid background music and easy-to-hear announcements for your customers.
Part of a customizable AcousticDesign™ system
These satellites share voice characteristics with other speakers and subwoofers in the AcousticDesign lineup so you can mix and match to build a custom system. Other speakers in the lineup include:
One of our commercial design specialists can help you create a system that matches your unique space.
- pendant speaker with 6-1/2" subwoofer and four 2-3/4" high frequency transducers
- nominal impedance: 6 ohms
- power handling: 200 watts RMS
- built-in transformer for use with commercial sound systems
- 70-volt taps: 12.5, 25, 50 and 100 watts
- 100-volt taps: 25, 50, and 100 watts
- 6-ohm transformer bypass
- frequency response: 40-20,000 Hz
- 110° conical coverage angle
- maximum SPL: 105 dB
- sensitivity: 86 dB
- snap-fit steel grilles
- mounting cables and fasteners included
- rugged ABS enclosure
- 2-pole Euroblock connectors
Dimensions and warranty:
- 13-3/8" diameter x 17-1/16"H
- weight: 22.5 lbs
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # AD-P.HALO-WH
What's in the box:
- One Sub/Sat pendant loudspeaker (white)
- Conduit clamp
- Tap cover-plate
- 4-Pin Euroblock connector (pre-installed)
- Eight 1/2" screws
- Five 3.75" wire-ties
- Two 10.5' suspension cables (main & safety) w/ integrated snap-hooks
- 2 Gripple cable-connectors
- Gripple release tool
- Quickstart guide
- Gripple installation instructions
- Warranty information
Thanks for submitting your review
More details on the QSC AD-P.HALO Pendant Speaker
Features & specs
|Drivers per speaker||5|
|Woofer Size (inches)||6.5|
|Tweeter Size (inches)||N/A|
|System Frequency response||40Hz-20Hzk|
|Peak Power rating||---|
Overview: The QSC AD-P.HALO is a full-range pendant speaker that has been developed as part of QSC's AcousticDesign Series Subwoofer and Satellite systems. The AD-P.HALO can provide clear, crisp background music and paging for large indoor areas, such as malls, transportation terminals, high-end retail, hospitality services, restaurants, and many other indoor applications where a high quality speaker system is required.
Enclosure: The QSC AD-P.HALO features a single 6.5" dual voice-coil subwoofer driver along with four 2.75" full-range drivers, arranged in a conical, down-firing enclosure that's designed to be suspended. Both driver types feature a high-quality treated paper cone with a rubber surround, and are housed in a durable ABS enclosure that includes 4 down-firing ports.
70/100V & Low-Z: Rated for 200 watts RMS, the AD-P.HALO provides significant dynamic headroom, surpassing the performance of traditional 2-way pendant speakers. It features an effective frequency range from 40Hz up to 20kHz, and can be used in either a 70/100 volt system or in a low-impedance (Low-Z) configuration. A single 4-pin Euroblock (Phoenix) connector is provided for running a mono 70 or 100 volt input signal and includes thru terminals for daisy-chaining multiple speakers. The pendant speaker's tap dial is located on top of the speaker and includes the following selections:
- 70V: 12.5W, 25W, 50W, and 100W
- 100V: 25W, 50W, and 100W
- Low-Z: Transformer bypass (6Ω)
AcousticDesign Series: The AD-P.HALO pendant speaker is part of QSC's AcousticDesign Series of speakers that share acoustically matched characteristics. These include QSC's AD-S.SAT surface-mount speakers or the AD-C.SAT in-ceiling satellite speakers (both sold separately). A pendant-mount subwoofer, the AD-P.SUB (sold separately), is also available for added low-end.
Mounting: The QSC AD-P.HALO includes two 10.5' cables for suspending the subwoofer over your listening area, one serves as the main support cable while the second acts as the safety backup cable. Included Gripple cable connectors allow the subwoofer's mounting height to be easily adjusted.
Terminals: All wiring to the AD-P.HALO speakers is done through a 4-pin Euroblock connector, accepting speaker wire up to 14AWG. The Euroblock speaker connector is secured in place on top of the speaker with 2 anchor screws. A tap cover-plate and terminal conduit clamp help keep wires secure and debris out of the connectors.