About the QSC AD-P.SAT
Solid speakers for rooms with high ceilings
Solid speakers for rooms with high ceilings
QSC AD-P.SAT speakers are built to work as part of a team.These pendant speakers provide rich mids and clear highs, and up to four can be connected directly to the high-pass filtered output on a matching QSC AcousticDesign™ Series subwoofer. They're designed to hang from high ceilings and deliver solid background music and easy-to-hear announcements for your customers.
Part of a customizable AcousticDesign™ system
These satellites share voice characteristics with other speakers and subwoofers in the AcousticDesign lineup so you can mix and match to build a custom system. Other speakers in the lineup include:
One of our commercial design specialists can help you create a system that matches your unique space.
Get started with
a free system design
After we gather your information, we’ll send you a detailed system plan. It will include a link to a pre-filled shopping cart. Ordering is easy, and delivery is fast.
Product highlights:
- pendant speakers with 2-3/4" treated paper cone woofer
- nominal impedance: 16 ohms
- power handling: 25 watts RMS
- frequency response: 150-20,000 Hz
- high-pass filter recommended
- 170° conical coverage angle
- maximum SPL: 96 dB
- sensitivity: 82 dB
- inverted aluminum dome dust cap
- snap-fit steel grilles
- mounting cables and fasteners included
- 2-pole Euroblock connectors
Dimensions and warranty:
- 4-5/16" diameter x 4-15/16"H
- weight: 14.6 oz. (each)
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # AD-P.SAT-WH
What's in the box:
- Two pendant speakers (white)
- Two 2-pin Euroblock connectors (pre-installed on speakers)
- Two 10.5' suspension cables (w/ attached snap-hook)
- 2 Gripple hangers
- Five 4" wire-ties
- Quickstart guide
- Suspension cable instructions
- Warranty information
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the QSC AD-P.SAT
Features & specs
| General | ||
|---|---|---|
| Drivers per speaker | 1 | |
| Woofer Size (inches) | N/A | |
| Tweeter Size (inches) | N/A | |
| System Frequency response | 150-20kHz | |
| Maximum SPL | 96 | |
| Power Handling | ||
| Power rating | 25 | |
| Peak Power rating | N/A | |
| Specs | ||
| Width (inches) | 4-5/16 | |
| Height (inches) | 5 | |
| Depth (inches) | 0 | |
| Weight | 0.92 lbs | |
Product Research
Features
Overview: The QSC AD-P. SAT pendant-mount satellite speakers have been developed as part of QSC's AcousticDesign Series Sub/Sat systems. These systems can provide clear, crisp background music and paging for restaurants, lounges, waiting areas, and many other indoor applications where a "low-profile" audio speaker system is required.
Speakers: The QSC AD-P. SAT speakers feature a 2-3/4" full-range driver with a weather treated paper cone and an inverted aluminum dust cap. Each 16 ohm satellite speaker is rated for 25 watts RMS and has a frequency response ranging from 150Hz up to 20kHz (200Hz high-pass filtering is recommended). The satellite speakers are housed in durable ABS enclosures with powder-coated steel mesh grilles. The speaker enclosures have an IP34 rating and are designed for indoor use only.
Sub/Sat System: Designed to be used in a matched system, the AD-P. SAT speakers can be paired up with any QSC AD Series subwoofer, such as the AD-C. SUB, ADP-P. SUB, or AD-S. SUB, in either a 70/100 volt or low-impedance (Low-Z) configuration. Each subwoofer includes output terminals for connecting the satellites speakers and has built-in high-pass filtering that's matched for QSC AD Series satellite speakers.
Mounting: The QSC AD-P. SAT pendant speakers each include a 10.5' suspension cable with an attached snap-hook for suspending from a ceiling or over-hang. Two Gripple hangers are used to secure the cabling at the desired height. Each hanger has a spring-loaded slide-release on each side of it that will allow the cable to slide through in one direction, but not the other direction until released. This allows for easy adjustment of the cable length during installation and provides a secure and clean looking installation.
Note: Ceiling attachment hardware and safety cables not included.
Terminals: Connection to the AD-P. SAT speakers is done through a single 2-pin Euroblock connector on each, accepting speaker wire up to 12AWG. Each speaker connector includes 2 anchor screws for securing the plug to the back of the speaker housing.
Loading accessories...
Customer Q&A
Loading articles...
