About the Fusion FM-F65SW
Clean sound and clean design
Clean sound and clean design
Fusion FM Series flush-mount speakers bring high-performance audio and a low-profile flush-mount design to your boat. These sleek speakers offer a mounting profile that tops out at 3/32” (2.5mm), so they'll fit nearly flat and blend right into today's marine design trends. Another plus — Fusion's innovative “speaker legs” keep the speaker in place and keep you from having to drill holes in your boat.
Made for life on the water
These Fusion speakers combine beauty and brawn, with power handling up to 30 watts RMS (120 peak). Designed by people who love both music and boating, these 6-1/2" speakers undergo rigorous testing to ensure that they're ready to rock, even in the extremes of a marine environment.
They're made to withstand heat, humidity, salt, spray, and high-pressure hose-downs at the dock, so they'll perform for seasons to come. As part of Fusion's True Marine™ line, these Signature Series speakers are even backed by a 3-year warranty.
Available in Black or White
- 6-1/2" 2-way marine speakers (pair)
- polypropylene cone with rubber surround
- aluminum dome tweeter
- flush-mount design
- square grilles
- Fusion True Marine™ accredited
- sealed, water-resistant construction
- UV-resistant grille
- meets IP65 water and dust resistant standards
- complies with ASTM standards for UV stability and salt/fog resistance
- power handling: 30 watts RMS (120 watts peak)
- frequency response: 100-18,000 Hz
- sensitivity: 87 dB
- impedance: 4 ohms
- cutout side length: 5.215"
- frame side length: 6.007"
- mounting depth: 2.66"
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # 010-02299-10
What's in the box:
- Two 2-way Marine speakers
- 2 Grilles
- Installation instructions (English/ French/ Italian/ German/ Spanish/ Portuguese/ Dutch/ Danish/ Finnish/ Norwegian/ Swedish/ Chinese)
- Safety and Product information
Thanks for submitting your review
More details on the Fusion FM-F65SW
Features & specs
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
87 dB at 1 watt |
|Frequency Response||100 - 18k Hz|
|Max RMS Power Handling||30|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||2 11/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 1/4|
True Marine: Fusion describes these speakers as True Marine Accredited, meaning they are designed specifically for the marine environment and backed by Fusion's 3 year warranty. The speakers are tested to ensure they meet or surpass IP65 standards (waterproof and dustproof on the front of the speakers).
Mounting: Unlike most marine speakers, the FM-F65SBs are designed to mount in a square cutout using four rotating cam-locks. The cam-locks rotate into place when you start tightening the mounting screws, then clamp over the ceiling/wall material to securely hold the speaker. The panel the speaker mounts to must be at least ⅛" thick, and less than 1" thick. Each speaker requires a square opening, approximately 5¼" x 5¼", and a minimum mounting depth of 2¾". The cams extend just over ¼" beyond the speaker frame.
Compass Safe Distance: The minimum distance the speakers should be mounted from a compass to avoid any interference is listed in the manual. (Approximately 6½' from the sides and 8' from the front and rear of the speakers.)
Speaker Terminals: Each speaker has a seven inch length of speaker wire attached, terminated with male quick slides (0.25" positive and 0.187" negative).
Enclosure: If the speakers are mounted in an enclosure, Fusion recommends 4 liters (0.14 ft³) sealed. An enclosure is not necessary, the speakers will operate in free-air.
Power Handling: Fusion lists two RMS power figures in the manual; RMS Power of 30 watts, and a Recommended Amplifier Power range of 15-80 watts RMS per channel.
Woofer Size: Fusion calls this speaker a 6½", which is similar to its frame size. However, the diameter of the woofer cone is approximately 3½".