Skip Navigation

Fusion XS-SL10SPGW

XS Series 10" 4-ohm marine subwoofer with RGB LED lighting

Overview

Our take on the Fusion XS-SL10SPGW

Fusion's XS-SL10SPGW marine subwoofer brings a lot more than bass to your boat. This powerful 10" sub handles plenty of power (120 watts RMS, to be exact), but it also has multi-color LED lighting that you can set to match your mood or keep time with the music. Made for marine use and built to last, this sub will be an outstanding addition to your marine audio system.

Heavy bass, cool lights

Fusion's XS-SL10SPGW marine subwoofer brings a lot more than bass to your boat. This powerful 10" sub handles plenty of power (120 watts RMS, to be exact), but it also has multi-color LED lighting that you can set to match your mood or keep time with the music. Made for marine use and built to last, this sub will be an outstanding addition to your marine audio system.

3-year warranty

A boat is a rough place for speakers. Heat, humidity, salt, spray, and high-pressure hose-downs at the dock can shorten the life of anything that's not built for life on the water. This IP65-rated subwoofer is designed to resist water, dust, salt, fog, and damaging UV rays, so it'll perform for seasons to come. Rigorous testing ensures that your Fusion sub is ready to rock, even in the extremes of a marine environment. As part of Fusion's True Marine™ line, the XS-SL10SPGW is even backed by a 3-year warranty.

Add a remote

Fusion's optional MS-RGBRC wireless remote controller gives you total control over the LED lighting. You can change the color, brightness, speed, and mode by using the touch controls. This remote can control up to three lighting zones from up to 10 meters from the speaker lighting controller module.
 

Product Highlights:

  • 10" marine subwoofer
  • built-in RGB LED lighting
  • polypropylene cone with rubber surround
  • comes with Sports Black and Sports White grilles
  • water-resistant basket and motor structure
  • meets IP65 water and dust resistant standards
  • True Marine accredited (passed extensive testing)
Specs:
  • handles up to 120 watts RMS (600 watts peak)
  • frequency response: 30-2000 Hz
  • sensitivity: 87 dB
  • impedance: 4 ohms
  • mounting depth: 4-7/16"
  • cutout diameter: 8-3/4"
  • recommended box volume: 1.41 cubic feet
  • warranty: 3 years
  • Our 60-day money-back guarantee

What's in the Box:

  • One 10" Marine subwoofer
  • 2 White grilles (installed)
  • 2 Gray grilles
  • Six 1" Stainless steel screws
  • Installation instructions (English/ French/ Italian/ German/ Spanish/ Portuguese/ Dutch)
  • Safety and Product information
  • Template
Reviews
Details

Hands-on research

Product Research

Features

True Marine: Fusion describes these tweeters as True Marine Accredited, meaning they are designed specifically for the marine environment and backed by Fusion's 3 year warranty. The speakers are tested to ensure they meet or surpass IP65 standards (waterproof and dustproof on the front of the speakers).

Compass Safe Distance: The minimum distance the speakers should be mounted from a compass to avoid any interference is listed in the manual. (Approximately 9⅔' from the sides and 12¼' from the front and rear of the speakers.)

Speaker Terminals: The subwoofer has a four inch length of speaker wire attached, terminated with male quick slides (0.25" positive and 0.205" negative).

LED Illumination: There are multi colored LEDs mounted inside the speaker frame, to create a glow on the cone. Depending on what combination of LED wires is connected, they can light red, green, blue, yellow, magenta, cyan, or white. A 12 volt power supply is needed to turn the LEDs on. Fusion recommends a switch and a 3-amp fuse in the power wire. The LEDs can also be controlled using Fusion's MS-RGBRC remote (item number 917RGBRC, sold separately).

2.1 Channel Operation: This subwoofer features dual 2Ω voice coils, preconfigured to present a 4Ω load. You can change the wiring configuration to support 2.1 channel operation (two full range speakers and one sub) when connected to a Fusion stereo with DSP capability, such as an Apollo RA770.

Stainless Steel Hardware: The provided mounting screws are stainless steel.

Enclosure: If the subwoofer is mounted in an enclosure, Fusion recommends 1.41 ft³ sealed. An enclosure is not necessary, the sub will operate in free-air.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Articles

Searches related to the Fusion XS-SL10SPGW XS Series 10" 4-ohm marine subwoofer with RGB LED lighting