About the Fusion XS-FL77SPGW
Big sound and cool lights
Big sound and cool lights
Fusion's XS-FL77SPGW marine speakers pack a lot of cool features into a compact design. They look great, they sound great, and they also bring multi-color LED lighting to your boat, so you can choose a color to match your mood or keep time with the music. Made for marine use and built to last, these powerful 7.7" speakers will be a great addition to your marine audio system.
Fusion's entire line of XS Series speakers is designed to deliver outstanding audio performance. Rugged poly cones and aluminum dome tweeters give you outstanding sound at all volume levels. The nifty open-backed baskets enhance the acoustic range and allow for greater heat dissipation, so you can crank it up without burning them out. The low-profile speaker grilles are another smart touch. They're definitely stylish, but they'll also protect the speakers from damage.
A boat is a rough place for speakers. Heat, humidity, salt, spray, and high-pressure hose-downs at the dock can shorten the life of any speaker that's not built for life on the water. These IP65-rated speakers are designed to resist water, dust, salt, fog, and damaging UV rays, so they'll perform at their peak for seasons to come. Rigorous testing ensures that they're ready to rock, even in the extremes of a marine environment. As part of Fusion's True Marine™ line, they're even backed by a 3-year warranty.
Add a remote
Fusion's optional MS-RGBRC wireless remote controller gives you total control over the LED lighting. You can change the color, brightness, speed, and mode by using the touch controls. This remote can control up to three lighting zones from up to 10 meters from the speaker lighting controller module.
- 7.7" 2-way marine speakers (pair)
- built-in RGB LED lighting
- sealed, water-resistant construction
- polypropylene cone with treated cloth surround
- aluminum dome tweeter
- comes with both Sport Gray and Sport White UV-resistant grilles
- meets IP65 water and dust resistant standards
- complies with ASTM standards for UV stability and salt/fog resistance
- power handling: 60 watts RMS (240 watts peak)
- frequency response: 70-18,000 Hz
- sensitivity: 92 dB
- impedance: 4 ohms
- cutout diameter: 6-3/8"
- mounting depth: 3"
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # 010-02197-20
What's in the box:
- Two 2-way Marine speakers
- 2 White grilles (installed)
- 2 Gray grilles
- Twelve 1" Stainless steel screws
- Installation instructions (English/ French/ Italian/ German/ Spanish/ Portuguese/ Dutch)
- Safety and Product information
More details on the Fusion XS-FL77SPGW
Features & specs
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
92 dB at 1 watt |
|Frequency Response||70 - 18k Hz|
|Max RMS Power Handling||60|
|Peak Power Handling (Watts)||240|
|Top-mount Depth (Inches)||2 15/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||6 1/16|
True Marine: Fusion describes these speakers as True Marine Accredited, meaning they are designed specifically for the marine environment and backed by Fusion's 3 year warranty. The speakers are tested to ensure they meet or surpass IP65 standards (waterproof and dustproof on the front of the speakers).
Compass Safe Distance: The minimum distance the speakers should be mounted from a compass to avoid any interference is listed in the manual. (Approximately 9' from the sides and 33⅓' from the front and rear of the speakers.)
Speaker Terminals: Each speaker has a six inch length of speaker wire attached, terminated with male quick slides (0.25" positive and 0.205" negative).
LED Illumination: There are multi colored LEDs mounted inside the speaker frame, to create a glow on the cone. Depending on what combination of LED wires is connected, they can light red, green, blue, yellow, magenta, cyan, or white. A 12 volt power supply is needed to turn the LEDs on. Fusion recommends a switch and a 3-amp fuse in the power wire. The LEDs can also be controlled using Fusion's MS-RGBRC remote (item number 917RGBRC, sold separately).
Stainless Steel Hardware: The provided mounting screws are stainless steel.
Enclosure: If the speakers are mounted in an enclosure, Fusion recommends 0.35 ft³ sealed. An enclosure is not necessary, the speakers will operate in free-air.