About the Fusion XS-S10CWB
Bold bass and smooth style
Bold bass and smooth style
Fusion's XS-S10CWB marine subwoofer brings a lot more than bass to your boat. This powerful 10" sub can handle plenty of power (120 watts RMS, to be exact), and it comes with both black and white grilles, so you can choose the look that's best in your boat. Made for marine use and built to last, this sub will be an outstanding addition to your marine audio system.
A boat is a rough place for speakers. Heat, humidity, salt, spray, and high-pressure hose-downs at the dock can shorten the life of anything that's not built for life on the water. This IP65-rated subwoofer is designed to resist water, dust, salt, fog, and damaging UV rays, so it'll perform for seasons to come. Rigorous testing ensures that your Fusion sub is ready to rock, even in the extremes of a marine environment. As part of Fusion's True Marine™ line, the XS-S10CWB is even backed by a 3-year warranty.
Classic Black and Classic White grilles are included in the box.
- 10" marine subwoofer
- polypropylene cone with rubber surround
- comes with Classic Black and Classic White grilles
- water-resistant basket and motor structure
- meets IP65 water and dust resistant standards
- True Marine accredited (passed extensive testing)
- handles up to 120 watts RMS (600 watts peak)
- frequency response: 30-2000 Hz
- sensitivity: 87 dB
- impedance: 4 ohms
- mounting depth: 4.38"
- cutout diameter: 8.59"
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # 010-02198-00
What's in the box:
- One 10" Marine subwoofer
- White grille (installed)
- Black grille
- Six 1" Stainless steel screws
- Installation instructions (English/ French/ Italian/ German/ Spanish/ Portuguese/ Dutch)
- Safety and Product information
Thanks for submitting your review
More details on the Fusion XS-S10CWB
True Marine: Fusion describes these tweeters as True Marine Accredited, meaning they are designed specifically for the marine environment and backed by Fusion's 3 year warranty. The speakers are tested to ensure they meet or surpass IP65 standards (waterproof and dustproof on the front of the speakers).
Compass Safe Distance: The minimum distance the speakers should be mounted from a compass to avoid any interference is listed in the manual. (Approximately 9⅔' from the sides and 12¼' from the front and rear of the speakers.)
Speaker Terminals: The subwoofer has a four inch length of speaker wire attached, terminated with male quick slides (0.25" positive and 0.205" negative).
2.1 Channel Operation: This subwoofer features dual 2Ω voice coils, preconfigured to present a 4Ω load. You can change the wiring configuration to support 2.1 channel operation (two full range speakers and one sub) when connected to a Fusion stereo with DSP capability, such as an Apollo RA770.
Stainless Steel Hardware: The provided mounting screws are stainless steel.
Enclosure: If the subwoofer is mounted in an enclosure, Fusion recommends 1.41 ft³ sealed. An enclosure is not necessary, the sub will operate in free-air.