About the Fusion XS-S10SPGW
A big sub for big bass
A big sub for big bass
Fusion's XS-S10SPGW marine subwoofer brings plenty of bass to your boat. This powerful 10" sub handles 120 watts RMS, so your music will get all the bottom-end thump it needs when you're out on the water. Made for marine use and built to last, this sub will be an outstanding addition to your boat's audio system.
A boat is a rough place for speakers. Heat, humidity, salt, spray, and high-pressure hose-downs at the dock can shorten the life of anything that's not built for life on the water. This IP65-rated subwoofer is designed to resist water, dust, salt, fog, and damaging UV rays, so it'll perform for seasons to come. Rigorous testing ensures that your Fusion sub is ready to rock, even in the extremes of a marine environment. As part of Fusion's True Marine™ line, the XS-SL10SPGW is even backed by a 3-year warranty.
- 10" marine dual 2-ohm voice coil subwoofer
- polypropylene cone with rubber surround
- comes with Sports Black and Sports White grilles
- designed for free air operation
- water-resistant basket and motor structure
- meets IP65 water and dust resistant standards
- True Marine accredited (passed extensive testing)
- handles up to 120 watts RMS (600 watts peak)
- frequency response: 30-2000 Hz
- sensitivity: 87 dB
- impedance: 1 or 4 ohms
- mounting depth: 4.3"
- cutout diameter: 8.59"
- recommended sealed box volume: 1.41 cubic feet
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # 010-02198-01
What's in the box:
- One 10" Marine subwoofer
- White grille (installed)
- Grey grille
- Six 1" Stainless steel screws
- Installation instructions (English/ French/ Italian/ German/ Spanish/ Portuguese/ Dutch)
- Safety and Product information
Thanks for submitting your review
More details on the Fusion XS-S10SPGW
True Marine: Fusion describes these speakers as True Marine Accredited, meaning they are designed specifically for the marine environment and backed by Fusion's 3 year warranty. The speakers are tested to ensure they meet or surpass IP65 standards (waterproof and dustproof on the front of the speakers).
Compass Safe Distance: The minimum distance the speakers should be mounted from a compass to avoid any interference is listed in the manual. (Approximately 9⅔' from the sides and 12¼' from the front and rear of the speakers.)
Speaker Terminals: The subwoofer has four inch lengths of speaker wire attached, terminated with male quick slides (0.25" positive and negative). At the factory, one negative wire and one positive wire are shorted together using posts on the back of the sub, wiring the dual 2Ω voice coils in series, to present a 4Ω load.
2.1 Channel Operation: This subwoofer features dual 2Ω voice coils, preconfigured to present a 4Ω load. You can change the wiring configuration to support 2.1 channel operation (two full range speakers and one sub) when connected to a Fusion stereo with DSP capability, such as an Apollo RA770.
Stainless Steel Hardware: The provided mounting screws are stainless steel.
Enclosure: If the speakers are mounted in an enclosure, Fusion recommends 40 liters (1.41 ft³) sealed. An enclosure is not necessary, the speakers will operate in free-air.
Power Handling: Fusion publishes several power specifications for this woofer, 120 watts RMS, 600 watts peak, and 40-300 watts recommended amplifier power (RMS). We've listed the conservative combination of 40-120 watts RMS in the specs table.