About the Fusion SM-F65CB
Stylish speakers for your boat's cabin
Stylish speakers for your boat's cabin
Fusion SM Series speakers bring high-performance audio and a low-profile, shallow-mount design to your boat. These sleek cabin speakers have a mounting depth of only 15/16”, and their 5-1/8" mounting diameter allows them to fit neatly into existing 6-1/2” cutouts. The special acoustic fabric grilles (available in black or white) will blend right in with your boat's décor, so these speakers will look as good as they sound.
Made for life on the water
These Fusion speakers combine beauty and brawn, with power handling up to 100 watts of peak power. The sealed enclosure, which is optimized for its 3" speaker, provides outstanding sound that'll make your cabin a great place to spend time.
Designed by people who love both music and boating, they undergo rigorous testing to ensure that they're ready to rock, even in the extremes of a marine environment. Though they're made for cabin installation, these speakers are still made to withstand heat, humidity, and salt air.
Multiple mounting options
- marine cabin speaker enclosures (pair)
- 3" speaker in tuned, sealed enclosure
- polypropylene cone with rubber surround
- designed for in-cabin installation (circular back fits most 6-1/2" speaker cutouts)
- shallow-mount enclosed design
- sealed, water-resistant construction
- acoustic cloth grille
- available in black or white
- meets IP65 water and dust resistant standards
- power handling: up to 100 watts peak
- enclosure footprint: 6-1/8" x 6-1/8"
- frequency response: 150-20,000 Hz
- sensitivity: 84 dB
- impedance: 4 ohms
- mounting diameter clearance: 5-1/8"
- mounting depth clearance: 15/16"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 010-02263-11
What's in the box:
- Two marine speakers (attached 6" speaker wire terminated in male spade connectors)
- 2 Cloth grilles (Black)
- 2 Foam gaskets
- Eight 1" Stainless steel screws
- Installation instructions
- Cutout template
- Safety instructions
Thanks for submitting your review
More details on the Fusion SM-F65CB
Features & specs
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
84 dB at 1 watt |
|Frequency Response||150 - 20k Hz|
|Max RMS Power Handling||---|
|Peak Power Handling (Watts)||100|
|Top-mount Depth (Inches)||0 7/8|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5|
Enclosure: The Fusion SM-F65CB marine speakers feature a sealed enclosure that helps protect the speaker while providing high quality audio through its tuned design, optimized for the single driver.
Drivers: Each speaker has a single 3" full-range driver that's matched to the sealed enclosure and capable of handling up to 100 watts (Peak).
Weatherproof: The Fusion marine speakers are designed for in-cabin installation, but still carry an IP65 weatherproof rating for added protection against dust and water ingress in the harsh marine environment.
Compass Safe Distance: The minimum distance the speakers should be mounted from a compass to avoid any interference is listed in the manual. (Approximately 6' from the sides, 7' from the front, and 8' from rear of the speakers)
Installation: The SM-F65CB speakers feature a shallow mounting depth, approximately ⅞", making them ideal for locations where mounting depth is limited. They also feature a circular back panel that's 5" in diameter, allowing them to easily retrofit into existing 6½" round speaker cutouts. Corner mounting the speakers can be done using one of Fusion's optional 2-surface or 3-surface corner spacers (both sold separately).
Grilles: Black cloth grilles are provided, to blend the SM-F65CBs into your boat's interior decor.
Wiring: Each speaker has a 6" length of speaker wire attached, terminated with male quick slide connectors (0.25" positive/0.187" negative).
- White: (+) Positive
- White/Black: (-) Negative