About the Fusion SG-TW10
Hit those highs
Hit those highs
These high-performance component tweeters will bring out the best in your Fusion marine audio system. Designed to enhance the already-awesome performance of Fusion's Signature Series speakers and DSP-enabled receivers, these compact, powerful tweeters will fit into higher locations like your boat's helm station, dash, or pilothouse support frames. With these rugged little speakers up near your ears, your boat's sound staging improves tremendously and you'll hear the high notes like never before.
Designed to perform
The folks at Fusion know audio and they know boating, so these speakers have everything they need to survive and thrive in the marine environment. With a 1” voice coil, a powerful neodymium magnet, and an aluminum dome design, these tweeters pack quite a punch for their size. They're IP65-rated for water resistance and the low-profile design mounts out of the way, so they're ideal for cabin or deck locations.
Built to last
A boat can be a rough place for speakers. Heat, humidity, salt, spray, and high-pressure hose-downs at the dock can shorten the life of any speaker that's not built for life on the water. Fusion's Signature Series marine speakers meet the toughest standards for UV stability and salt/fog resistance. Oh, and they sound awesome, too. As part of the Fusion True Marine™ line, Signature Series models are even backed by a 3-year warranty.
- marine component tweeters (pair)
- aluminum tweeter dome
- 1" voice coil
- low-profile design
- UV-resistant grille
- sealed, water-resistant construction
- handles up to 60 watts RMS (330 watts peak power)
- frequency response: 3,000-20,000 Hz
- sensitivity: 91 dB
- impedance: 4 ohms
- mounting depth: 1-1/4"
- cutout diameter: 2"
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # 010-02103-00
What's in the box:
- 2 Marine tweeters
- 2 Grilles (installed)
- Six 1" Stainless steel screws
- Two 0.25" Crimp-on 16-22 AWG female quick-slides
- Two 0.205" Crimp-on 16-22 AWG female quick-slides
- Two 0.25" Crimp-on 16-22 AWG piggy-back quick-slides
- Two 0.205" Crimp-on 16-22 AWG piggy-back quick-slides
- Installation instructions (English/ French/ Italian/ German/ Spanish/ Portuguese/ Dutch)
- Safety and Product information
More details on the Fusion SG-TW10
Features & specs
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
91 dB at 1 watt |
|Frequency Response||3000 - 20k Hz|
|Max RMS Power Handling||60|
|Peak Power Handling (Watts)||330|
|Top-mount Depth (Inches)||1 1/4|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||1 7/8|
True Marine: Fusion describes these tweeters as True Marine Accredited, meaning they are designed specifically for the marine environment and backed by Fusion's 3 year warranty. The speakers are tested to ensure they meet or surpass IP65 standards (waterproof and dustproof on the front of the speakers).
Compass Safe Distance: The minimum distance the speakers should be mounted from a compass to avoid any interference is approximately 3⅔'.
Speaker Terminals: Each speaker has a six inch length of speaker wire attached, terminated with male quick slides (0.25" positive and 0.205" negative).
Stainless Steel Hardware: The provided mounting screws are stainless steel.