About the Biketronics BT1005X Fairing and Wiring Kit
Ride with a new radio
Ride with a new radio
When you ride a Harley, you want the best. That means you need to replace the radio with an aftermarket receiver for the finest sound and the latest features. The Biketronics 1005X kit allows you to change the radio in select 1998-2013 Harley-Davidson models with a minimum of hassle. The kit includes mounting hardware, trim pieces, a non-powered antenna, a vapor barrier, and the electronic control module (splashcover available separately.)
You won't have to cut any switch wires to install the new radio, and you won't need to program anything to retain your standard handlebar audio controls. The BT1005X works with any JVC, Kenwood, Alpine, Pioneer, Clarion, Dual, or Sony radio with a wired remote input or steering wheel control input. If you're going to change your radio, this Biketronics kit provides a simple, dependable way to do it.
- multi-radio-brand kit for select 1998-13 bikes
- retains stock handlebar functions
- automatic volume control
- simple installation
- warranty: lifetime
- Our 60-day money-back guarantee
- MFR # BT1005X
What's in the box:
- Radio replacement interface module
- 23" Antenna wire
- 12" SWC minijack cable
- 2 Spacer blocks
- 2 Screws
- 2 Wire-ties
- Clear vinyl sheet
- Installation Manual
Biketronics BT1005X Fairing and Wiring Kit reviews
Thanks for submitting your review
More details on the Biketronics BT1005X Fairing and Wiring Kit
Vehicle Compatibility: The Biketronics BT1005X Radio Kit allows you to replace your 1998-2014 Harley Davidson motorcycle's factory radio with an aftermarket head unit. The BT1005X Radio Kit is compatible with 1998-2014 Harley Davidson Streetglide, Standard, Classic, Ultra, and Roadglide bikes.
Note: Please visit the Crutchfield Car Selector for your specific type of vehicle.
Single-DIN Mount: A black plastic trim-plate, two spacers blocks, and four screws are used to mount your single-DIN aftermarket stereo. There is also a self-adhesive clear vinyl sheet to protect the aftermarket radio and its connections from the elements.
Interface Module: The Biketronics BT1005X Radio Kit includes a radio replacement interface module with an integrated plug which connects into your Harley Davidson motorcycle's factory radio harness. The interface module also contains pin-connectors to connect the bare wires of your aftermarket head unit's harness. Pin-connectors located on the module include -
|Red||+12 Volt Accessory|
|Yellow||+12 Volt Constant|
|White||Left Front Speaker +|
|White/black||Left Front Speaker -|
|Gray||Right Front Speaker +|
|Gray/black||Right Front Speaker -|
Retains Handlebar Functions: The Biketronics BT1005X Radio Kit allows you to retain your Harley Davidson's handlebar functions through your aftermarket stereo's steering wheel control input. The BT1005X supports steering wheel control functions from Alpine, Clarion, Dual, JVC, Kenwood, Pioneer, and Sony.
Automatic Volume Control (AVC): The Biketronics BT1005X Radio Kit incorporates Automatic Volume Control (AVC), so your aftermarket head unit's volume changes with the speed of the bike.
Installation Note: Factory CB, intercom, and rear volume control functions are integrated into the Harley Davidson stock radio and cannot be retained when adding an aftermarket radio. Depending on bike configuration it may be necessary to install new rear speaker wires.
Q Crutchfield asked: Why did you buy this?
1 question already asked